ReviewsTitanium Carbide Powder

Radius 0.5 1 1.5 2 2.5 3 Ball Nose Carbide End Mill Set CNC Cutter Router Bits 2 Flute Spiral Milling Tool

  • 0.5-3mm Ball Nose Carbide End Mill: This end mill set includes 6 Radius sizes of 0.5mm, 1mm, 1.5mm, 2mm, 2.5mm, 3mm, satisfy your different needs..
  • Material: Tungsten Carbide.2 Flutes.Max Cutting material hardness:HRC45..
  • Coating witn TiAlN Can Cutting Harden materiel, 3 times Durable than Carbide..
  • For CNC,Engraving machine.Carbon steel,mould steel,alloy steel,inconel,stainless steel,titanium alloy etc..
Check Stock

Mollom Heavy Duty Carbide Hole Saw, Hole Cutter cuts Stainless Steel, mild Steel, Iron, Copper, Brass, Plastic ( 3'' 76mm )

  • ✔️┋【More Teeth】Includes 15 teeth for faster cutting and more teeth than other brands..
  • ✔️┋【Dimension】Cutting Dia: 3'' | 76mm.
  • ✔️┋【Extremely Long Life】Carbide hole saw last 10X Long Life over standard bi-metal hole saw, and even can bore up to 0.1 inch thick stainless steel..
  • ✔️┋【High Quality Material】Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust proof, sturdy and durable..
  • ✔️┋【Multipurpose Tools】This Carbide Hole saw set apply to Bench drill, magnetic drill, gun drill, drill percussion and so on. Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal;Note: Cannot be used for concrete, tiles and stone..
  • ✔️️┋【Perfect Cutting】The spring loaded pilot bit ejects the cut slug, saving time. The cutter body then cuts a clean, burr-free hole faster than conventional twist drills or hole saws..
Check Stock

Freud D1280X Diablo 12-Inch 80 Tooth ATB Crosscutting Saw Blade with 1-Inch Arbor, Red

  • Features Freud's TiCo Hi-Density Carbide with titanium for long life and a flawless finish.
  • Super thin laser cut kerf gives extremely fast, durable, and clean cuts.
  • Non-stick perma-shield coating to resist heat and reduce pitch build-up.
  • Laser-cut Stabilizer vents trap noise and vibration keeping the blade Cool and reducing blade warp.
  • Tri-metal brazing for impact-resistant tips.
  • Features Freud's TiCo Hi-Density Carbide with Titanium for long life and a flawless finish.
  • Non-Stick Perma-Shield coating to resist heat and reduce pitch build-up.
  • Laser-cut stabilizer vents trap noise and vibration keeping the blade cool and reducing blade warp.
  • Tri-Metal Brazing for impact-resistant tips.
Check Stock

TCT Hole Saw Set, 16-53mm Tungsten Carbide Tipped Hole, 13 Pcs Carbide Hole Saw Kit with Titanium Plated Pilot Drill Bit for Stainless Steel, Metal, Iron, Wood and Aluminum

  • Safe & Durable: This carbide hole saw set uses variable teeth technology with 3 distinct cutting edge to balance the cutting and make the blades more durable, sharp and more efficient for cutting hard metal..
  • Fasting Cutting: Carbide technology and optimized tooth geometry make hole cutter cut fast in most applications. This carbide hole cutter can precisely cut very smooth holes due to the concentricity rate..
  • Wide Application: 1/2 inch cutting depth makes this stainless steel hole cutter easy to pass through thick material such as: thick metal, stainless steel, iron pipes, aluminum, brass and sheet metal plate..
  • QUALITY MATERIAL: Our hole saw set are Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), Top-grade Titanium-plated cemented carbide Teeth ensures its high hardness, rust proof, sturdy and durable..
  • PACKAGE INCLUDES: The package includes 13 Pcs carbide hole saw: 16mm(5/8”), 18mm(45/64”), 20mm(25/32”), 22mm(55/64”), 25mm(63/64”), 26mm(1-1/32”) 28mm(1-7/64”), 30mm(1-3/16”), 35mm(1-3/8”), 40mm(1-37/64”), 45mm(1-49/64”), 50mm(1-31/32”), 53mm(2-3/32”). A variety of sizes to meet your different needs..
Check Stock

SpeTool Tapered Ball Nose End Mill 1/4\ Shank with 1/16\ Cutting Radius (1/8\ Diameter) for 3D Carving Engraving Router Bit, ZrN Coated

  • Tapered Ball Nose carbide EndMill / Cone Cutters with 1/4 Inch Shank 2 Flutes, ZrN Coated.
  • Ball Raidus: 1/16inch Flute Length: 1inch, Overall Length: 2-1/2Inch, Single Side Angel: 3.58.
  • The Tapered Carbide Carving bits suit For CNC,Engraving Carving 3D machine..
  • For HRC 55 Carving and machining hard wood, solid wood, partical board, plywood, stainless steel,titanium alloy etc.
  • High quality tungsten carbide and coat. Long service life and less wear..
Check Stock

SpeTool Tapered Ball Nose End Mill 1/4\ Shank with 1/64\ Cutting Radius (1/32\ Diameter) for 3D Carving Engraving Router Bit, ZrN Coated

  • Tapered Ball Nose carbide EndMill / Cone Cutters with 1/4 Inch Shank 2 Flutes, ZrN Coated.
  • Ball Raidus: 1/64inch Flute Length: 1inch, Overall Length: 2-1/2Inch, Single Side Angel: 6.28.
  • The Tapered Carbide Carving bits suit For CNC,Engraving Carving 3D machine..
  • For HRC 55 Carving and machining hard wood, solid wood, partical board, plywood, stainless steel,titanium alloy etc.
  • High quality tungsten carbide and coat. Long service life and less wear..
Check Stock

SpeTool Tapered Ball Nose End Mill 1/4 Shank with 1/32 Cutting Radius 1/16 Diameter for 3D Carving Engraving Router Bit ZrN Coated

  • Tapered Ball Nose carbide EndMill / Cone Cutters with 1/4 Inch Shank 2 Flutes, ZrN Coated.
  • Ball Raidus: 1/32inch Flute Length: 1inch, Overall Length: 2-1/2Inch, Single Side Angel: 5.38.
  • The Tapered Carbide Carving bits suit For CNC,Engraving Carving 3D machine..
  • For HRC 55 Carving and machining hard wood, solid wood, partical board, plywood, stainless steel,titanium alloy etc.
  • High quality tungsten carbide and coat. Long service life and less wear..
Check Stock

Mollom Heavy Duty Carbide Hole Saw, Hole Cutter cuts Stainless Steel, mild Steel, Iron, Copper, Brass, Plastic ( 1-3/4'' 45mm )

  • ✔️┋【More Teeth】Includes 10 teeth for faster cutting and more teeth than other brands..
  • ✔️┋【Dimension】Cutting Dia: 1-3/4'' | 45mm.
  • ✔️┋【Extremely Long Life】Carbide hole saw last 10X Long Life over standard bi-metal hole saw, and even can bore up to 0.1 inch thick stainless steel..
  • ✔️┋【High Quality Material】Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust proof, sturdy and durable;.
  • ✔️┋【Multipurpose Tools】This Carbide Hole saw set apply to Bench drill, magnetic drill, gun drill, drill percussion and so on. Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal;Note: Cannot be used for concrete, tiles and stone..
  • ✔️️┋【Perfect Cutting】The spring loaded pilot bit ejects the cut slug, saving time. The cutter body then cuts a clean, burr-free hole faster than conventional twist drills or hole saws..
Check Stock

6 X 40 SAW BOSS

  • Laser cut stabilizer vents trap noise and vibration keeping it cool and reducing blade warp.
  • Laser cut heat expansion slots allow blade to expand due to heat build-up keeping the cut true and straight.
  • Durable micrograin titanium carbide for extreme durability, razor-sharp cuts, and long life.
  • Tri-metal shock resistant brazing allows carbide tips to withstand extreme impact for maximum durability.
  • Laser cut arbor for accurate blade rotation reducing vibration and premature wear.
Check Stock

5 3/8 X 24 CORDLESS

  • Laser cut stabilizer vents trap noise and vibration keeping it cool and reducing blade warp.
  • Laser cut heat expansion slots allow blade to expand due to heat build-up keeping the cut true and straight.
  • Durable micrograin titanium carbide for extreme durability, razor-sharp cuts, and long life.
  • Tri-metal shock resistant brazing allows carbide tips to withstand extreme impact for maximum durability.
  • Laser cut arbor for accurate blade rotation reducing vibration and premature wear.
Check Stock

Groovemaster Carbide Tungsten Steel Replacement Cutter Head for Golf Club Groove Sharpeners Made by Specialty Golf Products

  • GROOVEMASTER TUNGSTEN CARBIDE STEEL CUTTER HEAD is the replacement cutter head for ANY 6 Head Groove Sharpener made by Specialty Golf Products..
  • REPLACE EXISTING CUTTER HEAD EASILY using existing screw using standard and commonly found 2.5mm hex wrench as in image shown (wrench not provided). Takes less than 2 minutes to upgrade..
  • CLEANS, DEEPENS AND RESTORES WORN GROOVES with the best accuracy of any golf club groove tool on the market. Premium cutter head, made of tungsten carbide steel, cuts through standard steel, titanium and even maraging steel with unmatched ease..
  • MEASURING A HARDNESS OF 65 ON THE ROCKWELL SCALE, this premium cutter head is made from high grade precision tool vacuum heat-treated carbide tungsten steel. The Groovemaster Carbide Cutter Head is the ultimate solution for maximum durability and re-grooving effectiveness..
  • PRECISION GROUND AND ENGINEERED TO EXACTING TOLERANCES to ensure that it does not compromise USGA rules regarding groove width and depth..
Check Stock