ReviewsTitanium Tap Set

aiyun 6 Pack Titanium Combination Tap Drill Bit Set, Thread Tap Drill Bits Set M3-M10 Metric Drill and Tap Set

...iple Drilling and tapping in one, one-step processing, which can drill, tap, deburr and counter holes on wood, copper, brass, aluminum, sheet metal and plastic greatly save processing steps and time costs, improve working efficiency.
[Material] HSS4341 (high-speed steel) + titanium coating. Each tap drill is engraved with a size making, which is convenient for you to choose the size that suits you.
[Quick Change] 1/4 inch Hex Shank fits into all power tools more easily and securely, especially for locking into quick change chuck. Hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread.
[Guarantee] Here at Rirui-tool we only care about your satisfaction. We try our best to ensure each product is in perfect condition before you get it, but if something is not up to your satisfaction, please contact us for a full refund.

Check Stock

NORTOOLS Drill Tap HSS Combination Drill and Tap Set with 1/4 Inch Quick Change Adapter,6-32 to 1/4-20 Screw Tapping bit Tool

✅【High-quality materials】SNUSIM combination drill tap bit is made of high quality High-Speed Steel 4341 and steel 6542. Strong hardness and good durability.The surface is treated with a titanium alloy, which greatly improves the cutting performance of the drill, is more wear-resistant and prolongs the service life..
✅【Standard sizes】6Pcs Combination Drill and Tap Bit, Inculued 6-32NC (3.5mm), 8-32NC (4.2mm), 10-32NC (5mm), 10-24NC (5mm), 12-24NC (5.7mm), 1/4-20NC (6.35mm), to meet your diversified requirements..
✅【Applicability】Drill tap bits set suitable for drilling tapping cutting on light metal aluminum board iron etc. Deburr/countersink also provided on bit beyond back taper. 4341 material is suitable for wood, aluminum, iron and other materials with lower hardness. The 6542 material has high hardness and is more durable, and can be applied to steel plates, even thinner 304 stainless steel plates of about 2mm..
✅【High efficiency】 Complete hole drilling, tapping, durable and countersinking in one operation and greatly save processing steps and time costs, improve working efficiency. Recommended for use it on a tapping machine. Pay attention to the operation method when using the electric drill. Excessive shaking and tilting w....

Check Stock

aiyun 6 Pack Drill Tap Metric M3-M10 Tap Set Metric Drill Taps for Steel Aluminum, Sheet Metal and Other Hard Metal Thin Plates(HSS6542)

[What You Will Have] Set of 6 tap drill set metric sizes M3x0.5 M4x0.7 M5x0.8 M6x1 M8x1.25 M10x1.5.
[Easy Use]Fast replacement composite cone uses drill edged principle Drilling and tapping in one, one-step processing, which can drill, tap, deburr and counter holes on aluminum, sheet metal and other hard metal thin plates, greatly save processing steps and time costs, improve working efficiency.
[Material] HSS6542 (high-speed steel) + titanium coating. Each tap drill is engraved with a size making, which is convenient for you to choose the size that suits you.
[Quick Change] 1/4 inch Hex Shank fits into all power tools more easily and securely, especially for locking into quick change chuck. Hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread.
[Guarantee] Here at Rirui-tool we only care about your satisfaction. We try our best to ensure each product is in perfect condition before you get it, but if something is not up to your satisfaction, please contact us for a full refund or replacement.

Check Stock

AUTOTOOLHOME Titanium Combination Drill Tap Bit Set 13PCS SAE and Metric Tap Bits Kit for Screw Thread Drilling Tapping Deburring Countersinking

Titanium Combination Drill tap bits are made of high speed steel 4341, which can ensure sharp, fast execution and retain strength and efficiency. The surface is treated with a titanium alloy, which greatly improves the cutting performance of the drill, is more wear-resistant and prolongs the service life..
13pcs drill tap kit include SAE and metric sizes, Suitable for most commonly used screw tapping.SAE Included 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC and 1/4-20NC,Metric included M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5 , Includes storage case and quick change adapter for easy bit switching.
Drill, tap, deburr and countersink in one quick and easy action,and complete job on copper, brass, aluminum, sheet metal ,mild steel and plastic.work completely, greatly save processing steps and time costs, and improve work efficiency..
Each drill tap bit is engraved with the right size, which is convenient for you to choose the size that suits you. Strong hex shank ensures strong connection to drill.a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread..
Included convenient swivel storage case,Swivel feature props up tap drill bits and securely holds them in place until ready t....

Check Stock

JEFE HEX 5/16\ Hex Shank Titanium HSS Twist Drill Bits, 135 Degree Easy Cut Split Point Drill Bit for Steel, Copper, Aluminum, Zinc Alloy, Wood and Plastics, Packed in a Double Blister.

【Various sizes】12pcs titanium drill bit set in SAE and metric with all popular sizes. 6 pieces SAE: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, 1/4-20NC. 6 pieces metric: M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5. Each hex drill bits is engraved with size label, which is convenient for you to read and choose..
【Quick Change】Comes with a quick change adapter, with lock function, can be firmly and stably installed on the electric drill. Maximize efficiency by switching between different sizes easily. 1/4 inch hex shank adapter fits for electric hand drill, impact drill, bench drill,electric screwdriver and other tap machine..
【Premium HSS】Made of premium high speed steel and titanium coating, the impact drill bit set features sharp and fast execution and better precision to retain strength and efficiency, the hex tail has good impact resistance and fracture toughness. Rust-proof and corrosion-resistant, more wear-resistant and long lasting..
【Multiple Application】The drill and tap set with high hardness, can easily work on wood, PVC, plastic, aluminum, copper and metal sheet etc. These metal drill bits suitable for drilling, tapping, deburring and countering holes..
【High efficiency】 All in one, no need to drill a hole....

Check Stock

ORION MOTOR TECH 86pc Tap and Hex Die Set in SAE and Metric | Titanium Coated Steel Tap Set and Die Tool Set for Homeowners Mechanics Metric Standard Internal External Threading(Iron Case)

ALL-IN-ONE TAP & DIE SET: This 86-piece internal and external threading tool kit by Orion Motor Tech includes both coarse and fine taps and dies in the most needed standard and metric sizes, from #4 (14/125") to 5/8 inch and from M3 to M16.
USER-FRIENDLY DESIGN: This tap and die set is engineered to tight tolerances to meet professional needs.
the tap ends are 1/5 to 2/5 inch long for easy use with the provided standard and metric wrenches.
PREMIUM DURABILITY: This tool set for homeowners, craftsmen, and mechanics is made of high-carbon chromium bearing steel.
titanium plating provides even greater strength, durability, and longevity so you can tackle any job with confidence.
ADDITIONAL TOOLS: In addition to the 78 taps and dies, this tool set includes both adjustable and T-handle wrenches, a 1/8" flathead screwdriver, and thread pitch gauges to find and carve the exact threading you need through wood, copper, aluminum, iron, steel, and more!.
BLOW-MOLDED CASE: The metal storage case stores and organizes the SAE and metric taps and dies, providing easy organization and portability wherever you need them.

Check Stock

KnKut 18 Piece National Course Tap/Drill Bit Set

No Center Punch or Pilot Hole required for drill bit.

Check Stock

Marco Almond KYA52 Rainbow Titanium Colorful Kitchen Utensils Set Stainless Steel Utensil Set - 6 Cooking Utensils Plugs DISHWASHER SAFE Rainbow Titanium Knife Set with Block,14 PCS Kitchen Knife Set

Premium and Eye Catching Knives Set – Marco Almond knife sets are are made of premium quality stainless steel to make them durable and long lasting. Each knife is coated with Titanium that creates a very soothing rainbow color effect. Stainless Steel material adds quality and Titanium coating provides a very beautiful look and decor as if they are art pieces. They are constructed differently with finely sharpened blades.
A Value Set for all Cutting Needs – Marco Almond are well suited for daily use at home in restaurant or kitchen. They are suitable for almost everything like cutting meat, fish, chopping fruits, vegetables, herbs, hardest bread crusts, hard cheese etc. 14 Pieces kitchen knives set includes: 1pc-8"Chef knife, 1pc-8"Slicing knife,1pc-8"Bread knife,1pc-7"Santoku knife, 1pc-5"Utility knife, 1pc-3.5" Paring knife, 6pcs 4.5" Steak knife, 1pc-all-purpose kitchen shears.
Convenient Design for Home and Professional Use – Marco Almond knife Rainbow Titanium Cutlery Knife Set comprises of 8 different types of knives to satisfy every type of cutting need at home or restaurant kitchen. These innovative designed knives are simply unique. Each of the elements of these knives adds elegance and proves that t....

Check Stock

J&R Quality Tools 40-Piece Titanium Coated Tap & Hexagon Die Set - Metric

Includes both fine and coarse threaded taps and die in Metric sizing..
Complete with compact custom fit latched ABS storage and carry case to protect and organize..
M3 to M12 taps and hexagon die with thread pitch from 0.5mm to 1.75mm.
Professional grade set of Titanium over alloy steel for superior cutting power without brittleness..
Adjustable and T-Handle tap wrenches, adjustable die wrench, screwdriver, thread pitch gauge..

Check Stock

Hair Straightener, 1.75 Inch Wide Titanium Flat Iron for Hair, Professional Hair Straightener with Adjustable Temp(170 ℉-450℉ ), Fast Heat Up Dual Voltage Flat Iron(Blue)

{Powerful Straightening Capabilities} 1.75 inch wide flat iron is suited for lots of different types of hair, especially thick and curly hair, even type 4C, with it you can style a bunch of more hair once. The larger titanium plates heat up fast and distribute heat evenly, save more time when styling..
{Adjustable Temperature Settings} Ranging from 170°F to 450°F, this flat iron allows you to adapt the heat to what your hair needs the most. Freely change to Celsius with just a tap and the straightener has a Digital LCD display that makes it easy to see what temperature setting you’re currently using..
{Salon-level of Styling} If you’ve got a mane that can’t be tamed, titanium is the way to go. The titanium plates are highly conductive and provide fantastic heat that deals with even tight coils & curls. Using this titanium flat iron promises a silky-smooth finish. Your hair will look healthy & will be delightful to run your fingers through..
{How Practical} The hair straightener adopted advanced digital technology PTC heater and 3D floating plates design, making it heat up quickly and achieve ZERO sticking or pulling, glide smoothly through hair. An auto shut-off that you can set in case you leave it on after 30 to 180 minutes as a safety precaut....

Check Stock

uxcell Straight Flute Taps M8 x 1.25 Metric Left Hand Titanium Coated M35 Cobalt High Speed Steel Machine Tapping Screw Thread Milling Tap Machinist Repair Threading Tool

Straight Flute Taps: Thread size: M8 x 1.25.
cutting direction: left hand (reverse). Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
Wide Applications: Suitable for processing through holes. Used for drilling and tapping stainless steel, aluminum, die steel, bronze, hard plastics, etc.. Recommended feed rate: general steel: 6-15m/min.
Titanium Coating: Titanium coating provides excellent corrosion resistance, greatly improves wear resistance and hardness, and reduces the coefficient of friction. M35 Cobalt high speed steel tool features high hardness (HRC65-66), high red hardness, high wear resistance, good toughness..
Easy to Use: The thread tap is used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use or electric drill use is easy to cause breakage to the tap, so it is not recommended. Prone to chipping or breaking due to speed overload or non-vertical tapping..

Check Stock