ReviewsTitanium coated Tap Set

Neiko 00916A 45 Piece SAE Tap & Die Set, SAE Tap and Die Set, Tap Set, Rethreading Kit, Pro-Grade Large Tap and Die Set, Titanium Threading Tools, Thread Chaser Set, Tap & Die Set Standard

  • HEAVY DUTY TAP & DIE SET: Titanium cutting edges hold sharpness up to 20x longer than steel, making this a perfect SAE tap and die set for any project, big or small..
  • VERSITILE: Create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper, and stainless steel with this tap and die kit..
  • DURABLE STORAGE CASE: This large tap and die set standard is fully equipped in a heavy-duty molded case for easy identification, storage, and portability for all your jobs on the go..
  • PREMIUM MATERIAL: Our SAE thread chaser set is made of a professional grade steel, highly durable and built to last for multiple uses. This tap set is perfect car repairs, DIY projects, and much more..
  • COMPLETE SET INCLUDE: This rethreading kit comes with the most popular SAE taps & dies. T-handle tap wrenches, adjustable die wrench, screwdriver, and thread pitch gauge..
Check Stock

YDLQWCZ Combination Drill Tap Bit 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc Set of 6 Screw Tap Bit 1/4 Inch Hex Shank HSS Spiral Flute Tapping Tool Set Kit Deburr Countersink Bit

  • ...ap drill has its corresponding size in the storage box, so you can choose the exact drill bit effortlessly. The 1/4" (6.35mm) hexagonal shank has a tapered end to prevent excessive knocking.The back taper exceeds the tap to prevent over-drilling and thread damage..
  • High Speed Steel 4341 Material - The surface of the titanium alloy combined drill bit is treated with titanium alloy, which effectively improves the cutting performance of the drill bit, is more wear-resistant, and prolongs the service life. Made of high-speed steel 4341, to ensure sharpness, speed, and maintain strength and efficiency..
  • Improve Efficiency - Drilling, tapping, deburring, and countersinking can complete the processing of copper, brass, aluminum, sheet metal, low carbon steel, and plastic at one time, improving work efficiency. Deepening the chip flute helps to remove the chips and debris on the tap, reducing friction and heat, so as to achieve a faster and colder drilling process..
  • Easy to Carry - This drill tap bits set is equipped with a storage box, which is convenient to carry and helps to keep the drill bit tidy..
Check Stock

uxcell M3 M4 M5 M6 M8 Spiral Flute Taps Set Titanium Coated High-speed Steel Machine Thread Metric Screw Taps 5pcs

  • Tap Size: M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1, M8 x 1.25. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads without burrs, fast tapping with accuracy..
  • Material & Coating: High-speed steel taps features high hardness and toughness, good for general purpose applications. Titanium coating is for capability, durability, wear-resistance, and long service life..
  • Applications: Suitable for processing blind holes and sticky materials. Suitable for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause damage to the tap due to uneven force..
Check Stock

6Pcs Combination Drill and Tap Set, Metric Thread M3-M10 Screw Tapping Tool 1/4\ Hex Shank Titanium Plated HSS

  • Applicability: This product includes 1/4 inch hexagon shank HSS drill bits and tap kits. Metric M3, M4, M5, M6, M8, M10 threaded countersunk screws can be tapped together with this drill tap..
  • Material: These drill taps are made of titanium-coated high-speed steel and have a longer service life..
  • Specifications: M3 x 0.5mm pitch, M4 x 0.7mm pitch, M5 x 0.8mm pitch, M6 x 1.0mm pitch, M8 x 1.25mm pitch, M10 x 1.5mm pitch..
  • Design: The drill tap adopts a spiral groove design, and the chip removal process will be better..
  • Accuracy: These drill taps are used for tapping on machines and are usually more precise because human error is eliminated..
Check Stock

uxcell Spiral Point Plug Threading Tap M6 x 0.75 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Round Shank with Square End, 2pcs

  • PACKAGE INCLUDES: There are total 12pcs of taps in 2 different standards( Metric, Inch) that you can use for tapping various threads..
  • DRILLING & TAPPING: This hex shank drill bits can drill and tap at the same time, saving your time and effort..
  • HEX SHANK: This is a set of 12 pieces hex shank drill bits. Drill taps are designed with spiral flutes, which have better the chip clearing process..
  • MARKED CLEARLY: Their specifications are marked clearly on the surface from M3 to M10, so you can find the right drill tap bit you need quickly..
  • HIGH HARDNESS: The hex shank drill bits are made of high speed steel with titanium coated, the drill bits have high hardness, rustproof, solid and durable..
Check Stock

Muzerdo 115PCS Sae and Metric Bearing Steel Tap and Die Rethreading Kit with Metal Box

  • ...n a wrench. Broadly speaking, they are all roughly the same, with a few notable exceptions. The tap wrench from Muzerdo, is the best on the market..
  • Construction Material – Steel is the base metal used in the construction of these sets – but not all steel is created equally! Look for steel alloy or, even better, Titanium tipped cutting surfaces. The better the metal the tougher the tap and die so they so they can cut into more.
  • Metric/SAE – The size of the tap and die is also important. Metric is of course the European measurement system, SAE are based on US sizes (so use inches instead of millimeters). This is important as you may struggle to use a SAE tap and die set on a vehicle with metric measurements. If the car is made in the US, it probably uses SAE measurements. If it is a European carmaker, it’s probably the opposite. If can look for a set with dual Metric and SAE compatibility of course then you don’t have t.
  • Metal Storage Case – More than with many other types of tools, the storage case is an important part of the tap and die set. Frankly, because these sets can come with multiple parts, you do want a case that is well designed to keep all the little pieces well organized and safely stored..
Check Stock

ATOPLEE Spiral Point Plug Threading Tap ,5pcs HSS 6542 Titanium Coated Metric Right Hand Thread Taps,M3-M8

  • ...n a wrench. Broadly speaking, they are all roughly the same, with a few notable exceptions. The tap wrench from Muzerdo, is the best on the market..
  • Construction Material – Steel is the base metal used in the construction of these sets – but not all steel is created equally! Look for steel alloy or, even better, Titanium tipped cutting surfaces. The better the metal the tougher the tap and die so they so they can cut into more materials and they will stay sharper for longer..
  • Metric/SAE – The size of the tap and die is also important. Metric is of course the European measurement system, SAE are based on US sizes (so use inches instead of millimeters). This is important as you may struggle to use a SAE tap and die set on a vehicle with metric measurements. If the car is made in the US, it probably uses SAE measurements. If it is a European carmaker, it’s probably the opposite. If can look for a set with dual Metric and SAE compatibility of course then you don’t have t.
  • Metal Storage Case – More than with many other types of tools, the storage case is an important part of the tap and die set. Frankly, because these sets can come with multiple parts, you do want a case that is well designed to keep all the little pieces well organized and safel....
Check Stock

WELLSTAR Measuring Cups and Spoons Set of 8 Food Grade 18/8 Stainless Steel Measure set for Dry Liquid Measurement Rainbow Titanium Coated Kitchen Gadgets for Cooking Baking 4 Cup and 4 Spoon

  • 【8-PIECE COOKING MEASURING SET】This 8 cooking measuring cups and spoons set includes: 1/4 cup, 1/3 cup, 1/2 cup, 1 cup.
  • 【PREMIUM 18/8 STAINLESS STEEL】These rainbow titanium coated baking measuring gadgets are made in top food-grade 18/8 stainless steel (304) which....
  • 【BEAUTIFUL RAINBOW TITANIUM COATED】This iridescent measuring cups 8-piece set is completely processed with rainbow titanium coating. This titanium....
  • 【DISHWASHER SAFE】Our irisated measuring spoons set are crafted with premium 304 stainless steel and highly mirror polished by our skillful....
  • 【CUSTOMER GUARANTEE-100% SATISFACTION】Lifetime warranty, for any reason, if you are not satisfied with our product, we will provide you a full....
Check Stock

uxcell Spiral Flute Taps M12 x 1.75 + 0.03 Metric Titanium Coated Cobalt High Speed Steel Machine Thread Milling Screw Threading Tap

  • Spiral Flute Taps: Thread Size: M12 x 1.75 + 0.03.
  • Square End Size: 7mm / 0.28". Spiral flute design, upward chip removal, fast tapping with accuracy. Titanium coating provides excellent corrosion resistance, improves wear resistance and hardness, and reduces the coefficient of friction..
  • Wide Applications: Suitable for processing blind holes and sticky materials. For tapping aluminum, die steel, stainless steel, bronze, plastics. Recommended feed rate: general steel: 6-15m/min.
  • cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..
  • Special Design: Enlarge the tap to suit the workpiece that needs electroplating or sandblasting after tapping. According to the thickness of the coating, an amplification of 0.03-0.1mm is generally used. It has high hardness and toughness, wear resistance, heat resistance..
  • Easy to Use: Used on drilling and tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection..
  • Tips: Prone to chipping or breaking due to speed overload or non-vertical tapping. Use the correct tapping too....
Check Stock

J&R Quality Tools 40-Piece Titanium Coated Tap & Hexagon Die Set - SAE

  • Includes both fine and coarse threaded taps and die in SAE sizing..
  • Complete with compact custom fit latched ABS storage and carry case to protect and organize..
  • Set Includes: 17pc Tap& 17pc Die: 4-40unc, 6-32unc, 8-32unc, 10-24unc, 10-32unf, 12-24unc, 1/4-20unc, 1/4-28unf, 5/16-18unc, 5/16-24unf, 3/8-16unc, 3/8-24unf, 7/16-14unc, 7/16-20unf, 1/2-13unc, 1/2-20unf, 1/8NPT27.
  • Professional grade set of Titanium over alloy steel for superior cutting power without brittleness..
  • Adjustable and T-Handle tap wrenches, adjustable die wrench, screwdriver, thread pitch gauge..
Check Stock

wesleydrill Mini Drill Bit Set 60 Pcs 3/64\-1/8\ Tiny Micro Twist Drill Bits Fit for Home DIY and General Building/Engineering

  • [Specifications and packaging]: 60pcs small drill bit set: Include size: 3/64 inchx10pcs drill bit ,3/32 inchx10pcs drill bit,1/16 inchx10pcs drill bit,5/64 inchx10pcs drill bit,7/64 inchx10pcs drill bit,1/8 inchx10pcs drill bit..
  • [Fitment]: Small titanium drill bit set ideal for DIY, home and general building/engineering using. Not for masonry and concrete drilling..
  • [Material]: Twist drill bit set industry grade high speed steel with titanium coating,high hardness,good wear resistance and durability..
  • [Advantage]: Tiny drill bits 135°precise point with sharpened edge promises cutting speed..
  • [Special coating]: HSS drill bit set titanium coating increases the ware-resistance and durability of the drill bit, effect long life drilling..
Check Stock