ReviewsToggle Bolt Anchor

TOGGLER SNAPTOGGLE BA Toggle Anchor Zinc-Plated Steel Channel Made in US 3/8 to 3-5/8 Grip Range For 3/16 -24 UNC Fastener Size Pack of 100 anchor with out bolts

  • Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material.
  • Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes.
  • Made in USA, and works with 3/16"-24 UNC-threaded metal bolts (sold separately).
  • Ultimate tensile strength is 238 lb. in 1/2" drywall and 802 lb. in concrete block with a 3/16"-24 UNC bolt.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

TOGGLER SNAPTOGGLE BCS Toggle Anchor, 304 Stainless Steel Channel, Made in US, 3/8\ to 2-1/2\ Grip Range, For 3/8\-16 UNC Fastener Size (Pack of 25)

  • Practical Kit: Zinc plated steel round head is used for hanging and fixing heavy objects. It is easy to use and bring more convenience to your life.
  • Premium Material: This toggle bolt and wing nut kit is made of high quality zinc plated steel which is strong and sturdy and offers good corrosion resistance and rust resistance in bad environment like high temperature, cold weather, and high humidity areas.
  • Wide compatibility: Widely used for hollow brick, gypsum board, cement fiber board, wood board and other hollow substrates, Suitable for installing light fixtures such as lamps, curtain rods, photo frames, coat racks, power switches.
  • Three Sizes: We have prepared 3 sizes of toggle bolt and wing nut kit, a complete kit, for you to meet different needs in your daily life.
  • What You Get: 1/8inch: 8pcs, 3/16inch: 8pcs, 1/4inch: 8Pcs, Lenink butterfly screws anchor drywall provide you with a more convenient driling way. Please feel free to contact us if you have any problem.
Check Stock

Aexit Blue Zinc Anchors Plated Screw Type Car Repair Expansion Bolt Stud Anchors M10x80mm 4pcs

  • EASY INSTALL TOGGLE BOLTS - These Elephant ANCHORS Drywall anchors mounting kit from CondoMounts are perfect for Wall and Ceiling mounting and feature the newer version of Wing/Toggle bolts. This kit is so simple to use that installation is typically 7x faster than normal! Also, our kit makes a smaller hole that holds more!.
  • A Revolution In Mounting - Our Heavy Duty 19-Piece Mounting Kit replaces the old fashioned toggle wings, wing anchor, molly bolts, and butterfly anchors system and can be pre-installed without using a bolt since our anchors won't fall off and into your wall..
  • Most Types Of Wall & Ceilings - Can be used in various hollow walls and ceiling 3/8" to 3" thick drywall, mdf, plywood, sheetrock, hollow block, plaster, tiles, Granite, plasterboard, sheet rock, gypsum board, cement board,.
  • Other Heavy Duty Mounting Needs - Perfect for hanging curtain rods, coat racks, bookshelves, hanging cabinets, sinks, curtain rods, bookshelf, racks, coat racks..
  • HEAVY DUTY DRYWALL MOUNTING KIT- The CondoMounts Heavy Duty 19-Piece 90lbs Drywall Mounting Kit includes 6 pieces of 3/16 hollow wall Elephant Toggle Anchors, 6 individual 3/16 x 2’’ screws, and one titanium coated hex shank ½’’ Drill Bit, providing everything needed for an easy mounting e....
Check Stock

Bonost 48 Pcs Toggle Bolts - 1/4 3/16 1/8 Inch Butterfly Toggle Anchors for Drywall - Toggle Bolt Assortment Kit with Matching Wing Nuts Hex Nuts Washers

  • 【What You Get】: 48pcs toggle bolts and wing nut kit, including 1/4-inch: 12pcs, 3/16-inch: 16pcs, 1/8-inch: 20pcs. We also provide matching hex nuts and washers, making it easier for you to hang mirrors or pictures..
  • 【High-quality Material】: Made of premium carbon steel, these toggle bolts for drywall are corrosion resistant, durable enough to meet different occasions. Zinc coatings make the toggle bolts have a longer service time..
  • 【Easy to Install】: 1. Drill a hole required for installation.
  • 3. Place wing unit on toggle bolt. Thread the bolt to a depth of about four or five threads.
  • 4. Install your toggle bolt and then tighten the fastener clockwise..
  • 【Wide Applications】: Butterfly anchors for drywall have spring-loaded wings that open inside the hollow wall, dispersing the weight of the secured item over a larger area. Widely used in hollow block, gypsum wallboard and more..
  • 【Durable & Sturdy Case】: Comes with no-mix compartments and carrying handle, the case is easy to carry and store toggle anchors. Made of durable construction and heavy duty material, the case offers long-lasting usage..
Check Stock

T.K.Excellent Plastic Self Drilling Drywall Ribbed Anchors with Phillips Pan Head Self Tapping Screws Assortment Kit,66 Pieces

  • The split in the ribbed anchors expand on two opposing sides as you tighten the screw,increased holding power.
  • Toggle bolt's wings spreads the force over the bearing surface,comes attached to a screw,use in concrete，brick.
  • Once anchor installed,they provide a flush,clean appearance in drywall.
Check Stock

T.K.Excellent Phillips Pan Head Self Tapping Screws and Ribbed Anchors Assortment Screws Kit,400Pcs

  • The split in the ribbed anchors expand on two opposing sides as you tighten the screw , increased holding power.
  • Plastic material expansion sleeve low cost, no rust, corrosion resistance, anti-aging, good toughness.
  • Once anchor installed, they provide a flush, clean appearance in drywall.
  • Toggle bolt's wings spreads the force over the bearing surface, comes attached to a screw, use in concrete and brick.
  • Kit includes:anchors:#6-#8,#10-#12,#12-#14.
Check Stock

DIY.TK Plastic Self Drilling Drywall Ribbed Anchors with Phillips Pan Head Self Tapping Screws Assortment Kit,66 Pieces

  • The split in the ribbed anchors expand on two opposing sides as you tighten the screw,increased holding power.
  • Toggle bolt's wings spreads the force over the bearing surface,comes attached to a screw,use in concrete，brick.
  • Once anchor installed,they provide a flush,clean appearance in drywall.
  • Kit Includes:E6,E7,E8 anchors, #6x1",#8x1-1/4",#10x1-1/2"pan head self-tapping screws（ANSI) ,and a plastic case.
  • Plastic(nylon) material anchors,no rust,corrosion resistance,anti-aging,good toughness and can be easily removed.
Check Stock

GalStudios 4pcs 4001-XT Tie Down Anchors Retractable Raised Truck Top Bed Side D-Ring Wall Anchors Compatible with Silverado Sierra RAM 98-2014 F (150)| 98-12 Ranger | 98-2016 F (250) F (350)

  • Universal stake pocket anchor point ideal for pickup truck applications.
  • Package Dimensions: 7.62 L x 17.272 H x 13.208 W (centimeters).
Check Stock

Toggle Anchor Bolts Hollow Wall Anchors 304 Stainless Steel Scissors Type Heavy Duty X Anchor M8x150mm Pack of 4

  • 1. New utility and original design. Compare with traditional anchor fasteners, this kind toggle bolts who fixed objects hardly to fall off and make sure safer and more fastness..
  • 2. The specialty of the new toggle bolts is the X shape head (or called scissors head ) who can firmly grasp the inner wall. The X shape head expand like a scissors and provide incredible tensile strength and shear force..
  • 3. Easy installation and can be used repeatedly. The new toggle anchor bolts are widely used in indoor and outdoor such as fix bracket, awning, barriers, furniture, equipment etc..
  • 4. Beautiful shape and good material. All components are high quality 304 stainless steel and offers rust protection..
  • 5. Fit for any concrete, walls, bricks and especially for hollow wall, air brick, foam concrete block and so on..
Check Stock

Ironwood Pacific AnchorLift Anchor Puller for River and Lake Anchoring, Floats up to 80 lbs

  • FLOAT YOUR ANCHOR OR CRAB TRAP TO THE SURFACE - The AnchorLift Anchor Puller easily floats anchors, crab traps, and lobster pots up to 80 lbs..
  • EASY-TO-USE ANCHOR RETRIEVAL SYSTEM - Slide the AnchorLift over the anchor line, tie off to a cleat and let the anchor out by holding the sliding bolt in the up position. When anchored toss the AnchorLift with buoy into the water. To raise your anchor motor your boat forward to float the anchor to the surface..
  • IDEAL FOR ANCHORING IN RIVERS AND LAKES - Use in place of a winch or windlass. Sliding stainless steel bolt grabs line and locks anchor at water's surface. Designed for use with anchor lines 3/8" to 5/8" in diameter..
  • QUALITY CONSTRUCTION - Made from marine grade nylon with stainless steel at all wear points. For extra heavy-duty use, consider our anodized aluminum AnchorLift Pro model. (Link in description below)..
  • MADE IN THE USA - The AnchorLift Anchor Puller and Polyform buoy are made in the USA and backed by a limited lifetime warranty..
Check Stock

Lenink 24 Pcs Toggle Bolt and Wing Nut Kit, Zinc Plated Steel Round Head Butterfly Drywall Anchor 1/4\ 3/16\ 1/8\ for Hanging Lamps, Curtain Rods, Photo Frames

  • ♛【What You Get】: In this toggle bolt kit, it include three most used size which are 1/8'' x 30pcs, 3/16'' x 20pcs, 1/4'' x 10pcs total 60pcs are packed in a durable plastic box, convenient for your use and storage..
  • ♛【Product Material】: All the toggle bolts are made of high quality carbon steel, rust resistance and corrosion resistance, durable enough for you to hanging items. Zinc plated on the surface make the product appearance is exquisite..
  • ♛【Spring Wing Design】: Collapsible spring-loaded wings desigh allows you to fold the wings so that they can be placed in the drilled hole. The wings will open behind the plasterboard to provide a reliable fixation..
  • ♛【Easy to Install】: First pre-drilled hole for installation, and then poke these toggle bolts through the hole. Then pull the bolt back down tight, please noted that you should leave enough room for wings to release. Finally, use an screwdriver to screw the bolt in..
  • ♛【Wide Application】: These Toggle bolts can be widely used in drywall, hollow block, plaster, tile, perfect for hanging curtain rods, lamps, photo frames, coat racks, power switches..
Check Stock