ReviewsToggle Mounting Bolt

TOGGLER SNAPTOGGLE BA Toggle Anchor with Bolts Zinc-Plated Steel Channel Made in US 3/8 to 3-5/8 Grip Range For 3/16 -24 UNC Fastener Size Pack of 10

  • Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material.
  • Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes.
  • Made in USA, and includes 3/16"-24 UNC-threaded bolts.
  • Ultimate tensile strength is 238 lb. in 1/2" drywall and 802 lb. in concrete block with a 3/16"-24 UNC bolt.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

TOGGLER SNAPTOGGLE BB Toggle Anchor with Bolts Zinc-Plated Steel Channel Made in US 3/8 to 3-5/8 Grip Range For 1/4 -20 UNC Fastener Size Pack of 10

  • Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material.
  • Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes.
  • Made in USA, and includes 1/4"-20 UNC-threaded bolts.
  • Ultimate tensile strength is 265 lb. in 1/2" drywall and 1,080 lb. in concrete block with a 1/4"-20 UNC bolt.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

Joinfworld Marine Toggle Switch 12V DC 30A Waterproof Toggle Switch 250V AC 15A Heavy Duty with Weatherproof Boot Cover SPST ON/Off 2 Pin for Auto Car Truck Boat -4Pcs

  • ON/OFF Toggle Switch: This is an SPST toggle switch, 2 pin switch, 2 position design. When turn the switch ON, it will stay at ON position until manually switch it off..
  • 15A 250V AC, heavy duty toggle switch 12v design..
  • Mounting Hole Size: The mounting hole size of this 12 volt toggle switch is 12mm (0.47 inch)..
  • Feature: 12v toggle switch with screw terminal. There is a gap on this 2 position toggle switch to fix the ON/OFF plate and prevent the plate from spinning on the switch. In addition, for becoming waterproof toggle switch 12v marine, this 2 way switch will come with a toggle switch cover..
  • Waterproof: The marine toggle rocker switch can reach IP65 waterproof rating after installing the rubber boot cover, suitable for automotive, car, truck, boat, yacht, DIY projects, household appliances, etc..
Check Stock

Hilitchi 24-Pcs 1/4\ 3/16\ 1/8\ Molly and Toggle Bolt Assortment Kit Zinc Plated Steel Philips Round Head Toggle Wing Nut Bolt Set

  • Size--1/8x2-inch,includes:50 packs 1/8x2-inch toggle bolt and 50packs wing nut..
  • Drywall toggle bolt made of high quality zinc plated carbon steel are rust and corrosion resistant, durable enough to hang items.Maximum weight capacity is 22 pounds.
  • The collapsible spring-style wing design allows you to fold the wing so it can be placed in the borehole. The wing will open behind the gypsum board to provide reliable fixation..
  • Our 1/8 in toggle bolts can be used for hollow bricks, gypsum board, cement fiberboard, wooden boards and other hollow substrates, suitable for installing lamps, curtain rods, photo frames, coat racks, power switches, and more..
  • Easy to install--You need to drill a hole (large enough to pass through the collapsed spring wing), and then poke these drywall toggle bolts through the hole. At this time, the wing will be loosened and clamped inside, and then the bolts will be tightened back. Please note that you should leave enough space to release the wing. Finally, it is best to use an electric screwdriver to screw in the bolts..
Check Stock

TOGGLER SNAPTOGGLE BA Toggle Anchor Zinc-Plated Steel Channel Made in US 3/8 to 3-5/8 Grip Range For 3/16 -24 UNC Fastener Size Pack of 100 anchor with out bolts

  • Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material.
  • Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes.
  • Made in USA, and works with 3/16"-24 UNC-threaded metal bolts (sold separately).
  • Ultimate tensile strength is 238 lb. in 1/2" drywall and 802 lb. in concrete block with a 3/16"-24 UNC bolt.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

QUALIHOME Spring Toggle Bolt Assortments Kit - Toggle Drywall Anchors Kit for Hanging Items w/Hollow Walls & Ceilings - 1/8” x 2” 3/16” x 3’’ 1/4” x 3 Sheetrock Anchor for Frames Shelves & More

  • Sturdy Toggle Bolts: Need to hang something heavy on the wall? Spring toggle bolt anchors are what you need! Toggle bolts for drywall As they can support twice as much load in a smaller hole than regular wing anchors, our toggle bolts are the most reliable anchors for plaster, concrete, hollow, drywall, & more.
  • Heavy-Duty Steel Material: Our wall anchors are made of high-quality steel, This sheetrock anchor offers strength, durability, and good resistance to rust and corrosion and great option for picture hanging anchors. Unlike plastic, our steel anchor bolts won't crack when tightened, can support heavier weights, and will retain their stability.
  • Spring Wing Design: The plaster wall anchor’s two-piece fastening system consists of a strong screw and a foldable spring wing toggle. With the wings that open inside the wall, the weight of the fastened object is evenly distributed across a large surface, making  wall anchors for shelves a reliable choice for securing heavy items to walls..
  • Easy To Install: Installing the heavy-duty wall anchors is a breeze! We have included DIY instructions for easily installing sheetrock anchors.
  • no special skills are required. To install, first make a hole using a screwdriver/drill, insert the toggle bolt through ....
Check Stock

CondoMounts Heavy Duty 19-Piece 90lbs NO Stud Drywall or Metal Stud Mounting Kit for TV Frame TV No Gap Mount Mounting kit.

  • EASY INSTALL TOGGLE BOLTS - These Elephant ANCHORS Drywall anchors mounting kit from CondoMounts are perfect for Wall and Ceiling mounting and feature the newer version of Wing/Toggle bolts. This kit is so simple to use that installation is typically 7x faster than normal! Also, our kit makes a smaller hole that holds more!.
  • FRAME TV MOUNTING KIT : Perfect for Mounting Frame TV Mount directly on drywall without the need for studs. 3/16 screws fit frame tv NO gap wall mount..
  • Most Types Of Wall & Ceilings - Can be used in various hollow walls and ceiling 3/8" to 3" thick drywall, mdf, plywood, sheetrock, hollow block, plaster, tiles, Granite, plasterboard, sheet rock, gypsum board, cement board,.
  • Other Heavy Duty Mounting Needs - Perfect for hanging curtain rods, coat racks, bookshelves, hanging cabinets, sinks, curtain rods, bookshelf, racks, coat racks..
  • FULL PACKAGE- The CondoMounts Heavy Duty 19-Piece 90lbs Drywall Mounting Kit includes 6 pieces of 3/16 hollow wall Elephant Toggle Anchors, 6 individual 3/16 x 2’’ screws, and one titanium coated hex shank ½’’ Drill Bit, providing everything needed for an easy mounting experience..
Check Stock

Toggle Bolt HSCGIN 24PCS M4 Stainless Steel Toggle Bolt and Wing Nut Kit Round Head Butterfly Drywall Anchor Toggle Wing Nut Bolt

  • Toggle Bolt and Wing Nut Kit. Color: Silver. Material: Stainless Steel..
  • Sturdy and well-made: high quality stainless steel anchors, environmentally friendly materials. Stainless steel can be used in wet environments and will last for a long time. We offer great toggle bolt kits..
  • How to apply this kit: First, you'll need to drill a hole (large enough to go through the folded spring wings), then thread these toggle bolts through the hole. At this point the wings are released and clamped inside, then the bolts are pulled down to tighten, taking care to leave enough room for the wings to loosen. Finally, it is best to use an electric screwdriver to screw in the screws..
  • Wide compatibility: widely used in hollow substrates such as hollow brick, gypsum board, fiber cement board, wood board, etc., suitable for installing lamps, curtain rods, photo frames, coat racks, power switches and other lamps..
Check Stock

DaierTek Gibon Les Paul Guitar Toggle Switch 3-way Pickup Selector for Electric Guitar Silver Tip

  • Feature: The 3 way guitar toggle switch is made of metal. The Silver switch tip is Aluminum Chrome plated..
  • Function: The treble toggle switch is 3 position design. Lugs are tinned so that easy soldering. Including knurled mounting nut and flat washer..
  • The pickup selector switch with 12mm panel mounting size..
  • Packing included 1pcs guitar switch with chrome Tip and 1pcs white RHYTHM TREBLE plate..
  • Application: The metric toggle switch is widely applied to gibson epiphone les paul electric guitar..
Check Stock

Cable Matters 10-Pack Single-Gang Toggle Switch Wall Plate (Wall Switch Cover) in White

  • 1 gang toggle switch wall plate cover provides a new or replacement toggle switch cover in the home or office.
  • Single light switch toggle wall plate provides a professional-looking installation.
  • Contemporary design of this toggle faceplate cover provides a clean look for an upgrade in the kitchen, dining room, or living room.
  • Smooth finish on the wallplates is easy to clean and includes matching painted screws.
  • Sturdy single gang toggle light switch plate covers fit a standard-sized single-gang receptacle.
  • Toggle light switch cover installs easily with the included mounting screws.
  • Cost effective 10 pack of light plate covers which provides enough faceplate covers for a small renovation project at home or work.
  • Toggle switch compatible to pair with a single pole toggle light switch in a standard-sized outlet box.
Check Stock

DaierTek 12 Volt 50 Amp Heavy Duty Toggle Switch 12V ON Off IP65 Waterproof Switch 2 Pin with Rubber Boot Cover Black Amber Red Blue -2pcs

  • 【Waterproof Toggle Switch】The toggle switch with rubber boot covered to be IP65 waterproof, 4 colors of covers (black, amber, red, blue) for your choose..
  • 【50 Amp Toggle Switch 12 Volt】50A 12V Heavy Duty toggle switch with screw terminals..
  • 【Aluminum Housing】The whole housing of this toggle switch is made of Aluminum, Durable enough. And the switch with 12mm panel mounting hole Dia..
  • 【ON OFF Toggle Switch】The toggle switch is 2 Pin SPST (Single Pole Single Throw) Version, Easy to toggle ON/OFF..
  • 【Application】 It's widely used as Automotive Replacement Toggle Switch, Fit for most Car, RV, ATV, UTV, Truck, Automotive, Marine, Boat and other electric equipments..
Check Stock