ReviewsToilet Handle Flush Arm

Danco HYR271T Hydroright Dual Flush Valve and Lever Handle White

WATER-SAVING TOILET FLUSH VALVE: The HydroRight replacement toilet flush valve easily converts most standard toilets into a dual-flush water-saving....
REPAIRS COMMON LEAKY TOILET ISSUES: Eliminates the most common problems in toilets that cause leaks as this flush valve replaces a worn-out toilet....
LEVER STYLE HANDLE: Includes lever style split handle flush activator that gives you a choice to use the quick-flush setting which uses less water....
COMPATIBILITY: Fits 1.6 to 3.5+ GPF (gallons per flush) standard 2-piece toilets with 2 in. flush valve and requires 10-inch minimum clearance from....
EASY NO-TOOLS REQUIRED INSTALLATION: Simple Drop-in installation without tools in less than 20 minutes with NO TANK REMOVAL required..

Check Stock

Toilet Economizer Dragon de Agua | 40% EcoFriendly Water Saver

WATER-SAVING DUAL FLUSH TOILET REPAIR KIT: Converts a standard toilet into a dual flush toilet that saves water by reducing the amount of water used with each flush. The HYR451T combines two products that together will increase your toilet’s efficiency: HYR271 Dual Flush Converter and HC630 HydroClean fill valve.
COMPATIBILITY: The Dual Flush Converter works with standard 2 in. flush valves and requires a 10-inch minimum clearance from highest point of the flush valve opening to the inside of the tank lid. NOT COMPATIBLE WITH MANSFIELD TOILETS..
FLUSH VALVE REPLACeMENT INSTALLATION TIP: Be sure to place the Dual Flush Converter directly in the center of your existing flush valve.
IMPORTANT INSTALLATION TIP: Do not remove overflow tube and flush valve from toilet tank.
the Dual Flush Converter is a replacement to the existing flapper.
slide the blue silicone dome gasket down the overflow tube, seating the gasket into the flush valve.
ELIMINATES TOILET LEAKS: Eliminates common leaky toilet problems due to a worn-out flapper, handle or faulty flapper chain.
the permafit silicone seal is also chlorine and chemical resistant and will not warp.

Check Stock

Qualihome Universal Side Mount Toilet Handle Tank Flush Lever Replacement Handle, White Finish Toilet Handle

Qualihome Side Mount Toilet tank lever handle can add a new stylish touch to your bathroom and will help your toilet, It features a White finish Handle with PLASTIC Lock Nut and rubber washer, Pre-Drilled 8-Inch Rod.
Easy to install, The universal design fits most side-mount applications, Durable construction.
Please note: FLUSH LEVER LOCKNUTS HAVE A REVERSED THREAD..
Instructions: 1. Remove chain or strap from existing flush lever. 2. Remove old flush lever. Note: the threads loosen in the opposite direction. 3. Insert new flush lever into toilet..
4. Attach locknut to flush lever and tighten it down to toilet tank, remember the reversed threads. Do not over tighten. 5. Attach chain or strap of toilet flapper ball to new flush lever and adjust as needed..

Check Stock

White Toilet Tank Flush Lever Handle, Universal Front Mount with Nut Lock, Fits Most Toilets

Toilet tank lever handle can add a new stylish touch to your bathroom and will help your toilet, It features a White finish Handle with Lock Nut, Pre-Drilled 8-Inch Rod.
The universal design fits most front-mount applications, Fits Most Toilets, Durable construction, Easy to install.
Please note: FLUSH LEVER LOCKNUTS HAVE A REVERSED THREAD..
Instructions: 1. Remove chain or strap from existing flush lever. 2. Remove old flush lever. Note: the threads loosen in the opposite direction. 3. Insert new flush lever into toilet..
4. Attach locknut to flush lever and tighten it down to toilet tank, remember the reversed threads. Do not over tighten. 5. Attach chain or strap of toilet flapper ball to new flush lever and adjust as needed. Packaging design may vary..

Check Stock

Qualihome Universal Side Mount Toilet Handle Tank Flush Lever Replacement Handle, Chrome Finish Toilet Handle

Qualihome Side Mount Toilet tank lever handle can add a new stylish touch to your bathroom and will help your toilet, It features a Chrome finish Handle with PLASTIC Lock Nut and rubber washer, Pre-Drilled 8-Inch Rod.
Easy to install, The universal design fits most side-mount applications, Durable construction.
Please note: FLUSH LEVER LOCKNUTS HAVE A REVERSED THREAD..
Instructions: 1. Remove chain or strap from existing flush lever. 2. Remove old flush lever. Note: the threads loosen in the opposite direction. 3. Insert new flush lever into toilet..
4. Attach locknut to flush lever and tighten it down to toilet tank, remember the reversed threads. Do not over tighten. 5. Attach chain or strap of toilet flapper ball to new flush lever and adjust as needed..

Check Stock

Danco HYR451T HyrdroRight Universal Water-Saving Toilet Repair Kit with Dual Flush Valve, Lever Handle, White

WATER-SAVING DUAL FLUSH TOILET REPAIR KIT: Easily converts a standard toilet into a dual flush toilet that saves water by reducing the amount of water used with each flush. The permafit silicone seal is also chlorine and chemical resistant and will not warp..
ELIMINATES TOILET LEAKS: Eliminates common leaky toilet problems due to a worn-out flapper, handle or faulty flapper chain..
DUAL-FLUSH LIGHT-TOUCH LEVER UNIQUE SPLIT HANDLE DESIGN: The short center lever is the Quick Flush setting that uses significantly lower water volumes for liquids and paper – this setting is needed 4 out of 5 times. The second complete push lever at end is the Full Flush that uses the normal amount of water for solids..
COMPATIBILITY: The Dual Flush Converter works with standard 2 in. flush valves and requires a 10-inch minimum clearance from highest point of the flush valve opening to the inside of the tank lid. NOT COMPATIBLE WITH MANSFIELD TOILETS. The HYR451T combines two products that together will increase your toilet's efficiency: HYR271 Dual Flush Converter and HC630 HydroClean fill valve..
HASSLE-FREE INSTALLATION: Drop-in installation without tools in 5 to 10 minutes - tank removal not required..
IMPORTANT INSTALLATION TIP: Do not remove overflow tube and flush....

Check Stock

Danco HYR460 Hydroright HyrdroRight Universal Water-Saving Toilet Repair Kit with Dual Flush Valve, Push Btton Handle, White

WATER-SAVING DUAL FLUSH TOILET REPAIR KIT: Easily converts a standard toilet into a dual flush toilet that saves water by reducing the amount of water used with each flush. The permafit silicone seal is also chlorine and chemical resistant and will not warp.
ELIMINATES TOILET LEAKS: Eliminates common leaky toilet problems due to a worn-out flapper, handle or faulty flapper chain.
DUAL-FLUSH LIGHT-TOUCH BUTTON UNIQUE SPLIT HANDLE DESIGN: The short center button is the Quick Flush setting that uses significantly lower water volumes for liquids and paper – this setting is needed 4 out of 5 times. The second complete push button at end is the Full Flush that uses the normal amount of water for solids.
COMPATIBILITY: The Dual Flush Converter works with standard 2 in. flush valves and requires a 10-inch minimum clearance from highest point of the flush valve opening to the inside of the tank lid. NOT COMPATIBLE WITH MANSFIELD TOILETS. The HYR451T combines two products that together will increase your toilet’s efficiency: HYR271 Dual Flush Converter and HC630 HydroClean fill valve.
HASSLE-FREE INSTALLATION: Drop-in installation without tools in 5 to 10 minutes – tank removal not required.
IMPORTANT INSTALLATION TIP: Do not remove overflow tube and flu....

Check Stock

Brushed Nickel Toilet Tank Flush Lever Handle, Universal Front Mount with Nut Lock, Fits Most Toilets

Toilet tank lever handle can add a new stylish touch to your bathroom and will help your toilet, It features a Satin Nickel finish Handle with Lock Nut, Pre-Drilled 8-Inch RodThe universal design fits most front-mount applications, Fits Most Toilets, Durable construction, Easy to install.
The universal design fits most front-mount applications, Fits Most Toilets, Durable construction, Easy to install.
Please note: FLUSH LEVER LOCKNUTS HAVE A REVERSED THREAD..
Instructions: 1. Remove chain or strap from existing flush lever. 2. Remove old flush lever. Note: the threads loosen in the opposite direction. 3. Insert new flush lever into toilet..
4. Attach locknut to flush lever and tighten it down to toilet tank, remember the reversed threads. Do not over tighten. 5. Attach chain or strap of toilet flapper ball to new flush lever and adjust as needed..

Check Stock

Next by Danco HYR270 Hydroright Water-Saving Dual Flush Valve with Push-Button Handle

DESIGNED TO FIT standard flush valves up to 2-1/2 inches. Height 10 -1/2 inches. INCLUDES split handle with flush activator. DOES NOT fit Mansfield....
SAVE WATER AND ENERGY: FITS 1.6 to 3.5+ gpf toilets and this dual flush valve converts a standard 2-piece toilet into a water-saving dual flush toilet....
ELIMINATES COMMON PROBLEMS in toilets such as faulty toilet flapper, flapper chain and toilet handle.
EASY INSTALLATION: Drop-In installation with no tools or toilet tank removal required.
DURABLE CONSTRUCTION - Chlorine chemical resistant and will not warp..

Check Stock

Aqua-Magic V RV Toilet Hand Flush / High Profile / White - Thetford 31667

[VERSATILITY]: Aqua-Magic V is the RV toilet with a classic style, suited for all recreational vehicles.
[FUNCTIONALITY]: The toilet has a single-handle flush system - press it halfway to add water to the bowl and all the way to flush - and 100% bowl coverage flush.
[UTILITY]: Aqua-Magic V has a textured lid which sheds water and resists scuffs, offering the comfort and feeling of a household toilet.
[CONVENIENCE]: Lightweight - 9.4 lbs - plastic RV toilet, easy to install, use and service.
[INCLUDED]: To further reduce the water consumption, the toilet can be fitted with a hand sprayer, perfect for a hand rinse wash down.
half way adds water, full activation provides a full-bowl coverage flush.
High profile offers taller seating height for maximum comfort.
Textured lid sheds water, resists scuffs.

Check Stock

Universal Toilet Trip Levers Flush Lever Handle for St701Cst854884, St701, St743S - Chrome Compatible with TOTOTHU068# THU004#

1.Toilet handle can add a new stylish touch to your bathroom and will help your toilet, It features a Chrome finish Handle with Lock Nut, Pre-Drilled 8-Inch Rod.
2.The universal design fits most side-mount applications, Durable construction, Easy to install.
3.Instructions: ① Remove chain or strap from existing flush lever. ② Remove old flush lever. Note: the threads loosen in the opposite direction. ③ Insert new flush lever into toilet.
4. Attach locknut to flush lever and tighten it down to toilet tank, remember the reversed threads. Do not over tighten.
5. Attach chain or strap of toilet flapper ball to new flush lever and adjust as neede.

Check Stock