ReviewsToilet Valve Wrench

Reed Tool HWB Cast Ductile Hydrant Wrench

  • Shower Valve Socket Wrench Set: The Set comes with five double end wrenches, bar handle and a bar wire holder for easy storage. The hex-shaped bodies allow for use with an adjustable wrench. There is also a hole near each end of the wrench for turning with a long screwdriver..
  • Common Size: This shower valve socket set has 5 pieces of socket with bar handle. Each 125 mm socket has been designed with different sizes helping in quick and easy wrench selection. The socket sizes are 21/32”x 27/32”, 29/32”x 31/32”, 1-1/32” x1-3/32”, 1-5/32”x1-9/32”, 1-11/32”x 1-7/16". The diameter of handle is 9mm..
  • Durable Steel Construction: Made of long lasting durable solid steel and the surface is nickel-plated. 5pcs socket set and afterburner rod are connected with a stainless steel wire..
  • Easy To Use: First, Turn off water supply. Next, Remove faucet handle cap, screw and handle, exposes valve stem and its packing nut. And then, Place correct and of wrench over valve stem onto packing nut, insert handle into opposite side of wrench. At last, Turn clockwise to tighten nut..
  • Which You Need: These plumbing socket wrench set is perfect for removing and installing tub and shower valves, fittings and nuts..
Check Stock

4 Pack Flush Valve Seal Gasket Replacement Compatible with Mansfield 210 and 211, Toilet Flush Valve Replacement Kit Red RV Toilet Seal Compatible with Mansfield 210 and 211

  • Suitable for: these toilet tank gaskets are suitable for Mansfield models 210 and 211 series.
  • You will get 4 pieces toilet seal replacement in red color.
  • Enough quantity can reduce the number of purchases, protect your home life and meet your demands.
  • Proper Size: toilet flush valve seal measures about 8.1 x 8.5 x 0.16 cm/ 2-1/8 x 3-1/8 x 1/16 inch.
  • Suitable size fits well for most toilet, please check the size before ordering.
  • Quality Material: the toilet valve seals are made of rubber, with nice deformability and corrosion resistance, which can prolong the service life of the product and help your toilet work better.
  • Easy to Install: installation dose not need complicated process, the valve seal repair kit can be installed easily with simple steps, please see the installation tutorial below for details.
  • Solve Your Troubles: the toilet valve seal replacement is to solve the problem of excessive flushing sound and too small flushing volume of your toilet, which has caused trouble to your life.
  • The existence of these toilet seal parts is to solve your troubles and make your home life happy and easy.
Check Stock

HTDAK 12 Inch (About 30cm) Toilet Fill Valve Silent Toilet Repair Water Saving Dual Flush Fittings Silent Split Toilet Valve Top Button Replacement Assembly

  • Toilet flush valve: for split toilets with top button, button hole diameter 3.8cm, drain hole diameter 6cm-7cm, measured tank height: 27cm-34cm, with tank cover height: 32cm-40cm.
  • Toilet filling valve: for toilets with bottom inlet, installation thread G15/16, adjustable range according to different tank heights: 27cm-34cm..
  • The double flush valve of the toilet can adjust the water level up and down to achieve full flush or half flush, and save water by adjusting the flush volume to reduce unnecessary expenses..
  • The toilet replacement valve kit is made of stainless steel, high-density carbon particle rubber, and high-quality silica gel: it has anti-corrosion, wear-resistant, rust-proof, leak-proof and other properties, and is suitable for operation under various water pressures and water quality..
  • The universal toilet replacement valve body is simple in structure, easy to replace, and only takes 10 minutes to install. It is easy to clean and maintain, so that your toilet components can continue to run smoothly..
Check Stock

Korky 528T Replacement TOTO Toilet Fill Valve - Fits G-Max and Power Gravity Toilets -Easy to Install -Made in USA

  • TOTO FILL FALVE: Designed to replace G-Max & Power Gravity Toilets. Designed to fix no/slow refilling, running, & noisy toilets, the fill valve is quieter than other fill valves. Adjustable sizing..
  • EASY TO INSTALL: Simply remove your old fill valve or ballcock, insert your new Korky fill valve, & adjust. The innovative twist-lock adjustment makes installation easy. Adjusts from 7-3/4″ to 13-1/2″..
  • INCLUDES: The universal fill valve set includes fill valve, refill tube, metal refill tube clip, mounting nut, cone washer, coupling nut, tamper proof key and instructions..
  • WHY KORKY: Our high quality toilet products are universal & specific to both older & modern toilet models. Our repair parts are easy to install & made exclusively from long lasting chlorazone red rubber..
  • REPLACEMENT TOILET PARTS: Try Korky Toilet Repair because we continue to commit to designing toilet repair parts that are unviersal to fit the majority of toilets. Designed & manufactured in Wisconsin..
Check Stock

Universal Toilet Repair Kits Complete Toilet Tank Repair Kit For 2-Inch Flush Valve Toilets with Fill Valve Toilet Flapper and Tank to Bowl Gaskets and Bolts All In One

  • 1.Adjustable Fill Valve: Toilet fill valve is quieter than other fill valves. Toilet fill valve height adjusts easily between 7.8inch to 13inch..
  • 2. 2-inch Toilet Flush Valve and toilet flapper: Adjustable 2 inch flush valve is quick and easy to install with no tools or hack sawing required. 2....
  • 3.Tank to Bowl Gaskets: The included hardware kits are brass to ensure long lasting. Special designed extra long nuts are for easy installation..
  • 4.Tank to Bowl Bolts: 2 pairs heavy duty bolts toilet bolts for tank solid brass with extra long nuts easy to install and double gaskets for....
  • 5.Everything needed included: Replaces inefficient fill and flush valves, leaky flappers, gasket and hardware bolts.Easy-to-install, simple....
Check Stock

Danco HYR271T Hydroright Dual Flush Valve and Lever Handle White

  • WATER-SAVING TOILET FLUSH VALVE: The HydroRight replacement toilet flush valve easily converts most standard toilets into a dual-flush water-saving....
  • REPAIRS COMMON LEAKY TOILET ISSUES: Eliminates the most common problems in toilets that cause leaks as this flush valve replaces a worn-out toilet....
  • LEVER STYLE HANDLE: Includes lever style split handle flush activator that gives you a choice to use the quick-flush setting which uses less water....
  • COMPATIBILITY: Fits 1.6 to 3.5+ GPF (gallons per flush) standard 2-piece toilets with 2 in. flush valve and requires 10-inch minimum clearance from....
  • EASY NO-TOOLS REQUIRED INSTALLATION: Simple Drop-in installation without tools in less than 20 minutes with NO TANK REMOVAL required..
Check Stock

385311641 Water Valve Kit, Plastic RV Camper Toilet Valve Parts for Pedal Flush Valve Toilets Compatible with Sealand 300 310 311 320 and 321 Series RV Marine Toilet Flush Valve Replacement (1 Piece)

  • Quality material: this 385311641 water valve kit made of quality ABS plastic material, sturdy construction to prolong the serve life and performance of this rv toilet parts.
  • Nicely fix and fit your toilet's hardware.
  • Applied for: the rv toilet valve parts and flush ball gaskets are compatible with Sealand 300/ 310/ 320 RV, Camper, trailer toilets, very practical.
  • Easy to use: you just need to snap the rv flush valve in, secure with 2 screws, and reconnect water lines.
  • Make it easier on yourself if you don't have ample room behind your toilet and use a mirror (or your phone in selfie mode) so that you can see the back of the assembly.
  • Nice combination: you will get 1 x toilet valve, 1 x rv toilet ball seal replacement, 1 x hose clamp, 2 x stainless mesh filters and 2 x screws.
  • Warming tips: check part numbers to ensure proper fit.
  • During the installing the rv water valve, please insure to install button with the correct angle in case that being broken.
Check Stock

Fluidmaster 507AKP7 PerforMAX Universal High Performance 2-Inch Toilet Flush Valve Repair Kit with Gasket and Bolts

  • ENHANCES YOUR TOILET’S POWER: Toilet fill valve with bolts and gasket replaces old or inefficient fill valves to repair a leaking toilet tank and optimize flush performance.
  • UNIVERSAL DESIGN: Fill valve replaces any two-piece toilet flush valve and is ideal for use in 3.5 gallons per flush toilets.
  • CORROSION RESISTANT: The 502 2-inch flapper features corrosion/hard water-resistant materials.
  • EASY INSTALLATION: Easily installs in 10 minutes or less to get your toilet flushing like new again.
Check Stock

Faucet Supply Lines Connector Stainless Steel Braided Supply Hose 3/8-Inch Female Compression Thread x M10 Male Connector, 24-Inch Long x 2 Pcs (1 Pair)

  • Standard US 1/2 "internal thread, the faucet supply line connector inlet is 3/8" compression connection to the supply stop valve, its outlet is 1/2 "female iron pipe (FIP or IPS), its total length is 11-4/5". There are 6 pieces 1/2 supply line in the package..
  • The 1/2 inch faucet supply lines external and internal are made of high quality 304 stainless steel material, rust proof and corrosion proof, not easy to break, and longer service life..
  • Thick rubber gasket with a high sealing hose, can effectively prevent leakage.The 1/2 inch sink hose is woven of high strength stainless steel to ensure maximum pressure and optimal performance. Let you always avoid the unpleasant of a broken water pipe..
  • The braided faucet line connector is easy to install, flexible hose, easy to handle, sturdy stainless steel nut, plus the hose is equipped with an ABS wrench, no other tools, direct hand tightening to complete installation..
  • The 1/2 inch toilet supply line It can be compatible with most standard size faucets. Suitable for kitchen, bathroom, toilet, washbasin, water heater, toilet, hot and cold water supply, base faucet, etc..
Check Stock

Korky Toilet Repair R528P2 Fill Valve Replacement Cap, Black, Pack of 2

  • FILL VALVE CAP: The Korky Toilet Fill Valve Replacement Cap fits Korky QuietFILL, Platinum and TOTO Fill Valves.
  • TOILET FILL VALVE REPLACEMENT: The replacement cap features a durable plastic construction with a premium, long lasting rubber diaphragm. Easy to install.
  • WHY KORKY: Our high quality toilet products are universal & specific to both older & modern toilet models. Our repair parts are easy to install & made in the USA.
Check Stock

YUHX Brass Bidet T Adapter with Shut-Off Valve,3 Way 7/8 or 15/16 and 1/2 or 3/8,Metal T Valve for Bidet Tee Connector Water Diverter Valve

  • ❶ ★ [ Easy to install ] Plastic thread neckline ensures that it will not cause cross-threading and leakage problems , Metal bidet adapter valve can be connected to the toilet filling valve manually without tools , cone washer helps make installation smooth and leak-proof.
  • ❷ ★ [ No-Leak metal t valve for toilet ] It has chrome plated surface , the leak proof design , high quality brass and ceramic valve , compression resistance , explosion proof, ensuring quality and longevity , no need to worry about fracture.
  • ❸ ★ [ Screen Washer Can Extend The Use Time of Bidet ] Includes screen filter washer to bidet line , Bidet shut off valve adapter with 1/2 filter screen sealing washer Can capture sand , dust , rust or other sediment particles entering the bidet , effectively prevents water damage.
  • ❹ ★ [ Brass t-valve bidet connection Size ] 7/8 female thread to the toilet filling valve , 7/8 male thread to the water supply ( 7/8 cock thread compatible 15/16 – 14UNS ) , 1/2 thread or 3/8 Compression thread to the bidet hose.
  • ❺ ★ [ 7/8 bidet adapter t valve ] Used to shut off water flow when not in use and adjust water pressure to suit your needs, there is no need to worry about affecting the water flow of the toilet after installing the bidet ....
Check Stock