ReviewsTon Cable Puller

10000 psi Hydraulic Hand Pump 2 Speed Power Pack Hydraulic Lifting Pump

  • Maximum operating pressure of 10,000 pounds per square inch (psi)，Two-speed Plunger Improves Pump Efficiency By 70%.
  • Advances and releases design for applications with a constantly applied load Pressure relief valve (Oil return knob)helps prevent pump overload, switch( venting nut) on the tail of it avoid sealed of oil box.
  • Oil capacity: 700cc, 2M high pressure hose ，oil pipe coupling with PT3/8 thread.
  • Manual Hydraulic Pump is durable, smooth surface and good sealing performance. Integral Casting Pump Body, Durable, Stable And Reliable.
  • High-pressure hydraulic hand pump for 5 ton to 200 ton hydraulic ram cylinders or split unit hydraulic puller and other hydraulic applications.
Check Stock

OTC PA7 7-Ton Capacity Four-in-One Puller Set

  • You can quickly assemble a 2/3-jaw puller with standard or long reach.
Check Stock

Stanley Proto J4292B 10 Ton -Ease Wide Puller Set

  • Required for large parts with heavy press-fits.
  • Reaches to over 12-Inch and spread of 11-Inch.
  • Makes over 10 different adjustable and straight jaw pullers.
Check Stock

3 Ton Ratchet Puller With 35' Of 5/16" Amsteel Blue

  • 3 TON RATCHET PULLER (W/35FT AMSTEEL BLUE).
Check Stock

Stanley Proto J5249XL 3/8' Drive Premium Pear Head Ratchet, 8-1/2'

  • Reach: 2-15/16-inch, 4-11/16-Inch, 7-1/8-inch (18-Inch with jaws bolted together) - Spread: 10-Inch.
Check Stock

Stanley Proto J4234 10 Ton 2-Way Straight Jaw Puller Set

  • Reach: 2-15/16-inch, 4-11/16-Inch, 7-1/8-inch (18-Inch with jaws bolted together) - Spread: 10-Inch.
  • Spring clip, Detachable tip, Dual reach jaw, Cap screw jaw, Forcing screw, 2-way Crossarm, 11-Inch long.
Check Stock

Supreme Suspensions - Full Lift Kit for 1987-2004 Dodge Dakota Adjustable 1 to 3 Front Lift Torsion Keys + 2 Rear Lift Blocks + Square Bend U-Bolts 4WD

  • COMPATIBLE WITH 1987 - 2004 Dodge Dakota. *Only fits AWD models with 8.25" rear axle..
  • CONTENTS: (2x) Front Lift Torsion Keys, (2x) Rear Tapered Lift Blocks, (4x) Square Bend U-Bolts, Installation Hardware, Installation Instructions,....
  • TECHNICAL NOTES: Adjustable 1 to 3 inch front and 2 inch rear suspension lift..
  • INSTALLATION: Easy bolt-on installation takes 2 to 4 hours. A torsion bar puller, or 5 ton gear puller is required for install. An alignment is always....
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires. Our front MAX-Torsion....
Check Stock

OTC 1039 13-Ton 'Grip-O-Matic' Puller - 2 Jaw (Mechanical)

  • OTC's 13-ton capacity, 2-jaw, gear and bearing puller enables you to remove and install parts for fast, effective repairs.
  • Forged from quality steel, heat treated, and subjected to rigorous tests which exceed the rated capacity.
  • Center screw size - 13/16-16 x 12 inches long.
Check Stock

OMT Bearing Puller Set 5 Ton Capacity Bearing Separator Pinion Wheel Bearing Removal Kit with 2 and 3 Jaws Wheel Hub Axle Puller Set Heavy Duty Bearing Splitter Tool Kit with Case

  • VERSATILE BEARING PULLER: This Orion Motor Tech bearing puller set enables you to complete a wide range of pulling jobs, ideal for removing large or small bearings on front and rear wheel hub axle shafts, as well as gears, pulleys, and steering wheels.
  • ALL-IN-ONE TOOL KIT: Our bearing separator set includes a 3" bearing separator jaw, 2" bearing separator jaw, 6" yoke, 6-1/4" forcing screw, four 4" extension screws, four 5" extension screws, and two 4-1/2" L-type legs.
  • WIDE APPLICATION: The 2 bearing splitter jaws’ 5 ton capacity ensures they stand up to punishing use.
  • suitable for professionals and home mechanics and compatible with most vehicles, ATVs, and light trucks.
  • EFFECTIVE OPERATION: The knife like taper feature allows the jaws to get behind bearings to securely grip any bearing.
  • the included tools enable you to reach and remove bearings in tight spaces effectively.
  • DURABLE CONSTRUCTION: Constructed from heat treated Cr-V steel with black oxide finish, this pinion bearing puller set ensures corrosion resistance and long-term durability under even punishing use.
Check Stock

NMAZA 3 Jaw 10 Inch Hydraulic Gear Puller 10Ton Wheel Bearing Pulling Separator 3 in 1 Pump Oil Tube Drawing Machine M/Case

  • 【POWERFUL TOOL】 : This Hydraulic Gear Puller has 10 Ton Max Capacity and 2"(50mm) Ares Travel with spread10" ( 250mm) which can meet your working requirements.
  • 【3 IN 1 DESIGN】:This Wheel Bearing Pulling Separator integrates pumps, oil tube and drawing machine. Its forged steel 2 way yoke allows twin or triple leg pulls, the 3 jaw types can be adjusted from high to low point. Pump head can be turned by 360°for flexibility.
  • 【COMPACT & LIGHTWEIGHT】: The integral puller is compact and lightweight, Packed in blow mould carrying case, easy for you to transport or storage.
  • 【EASY TO USE】-Easy to carry and operate, portable structure is easy for carrying and operation.
  • 【WIDE APPLICATION】: This great Wheel Bearing Hub Removal Tool has wide appication, which is suitable for pulling hubs flanges, gears and bearings.
Check Stock

Supreme Suspensions - Full Lift Kit for 1987-2004 Dodge Dakota Adjustable 1 to 3 Front Lift Torsion Keys + 2 Rear Lift Blocks + Square Bend U-Bolts + Axle Alignment Shims 4WD

  • COMPATIBLE WITH 1987 - 2004 Dodge Dakota. *Only fits AWD models with 8.25" rear axle..
  • CONTENTS: (2x) Front Lift Torsion Keys, (2x) Rear Tapered Lift Blocks, (4x) Square Bend U-Bolts, (2x) Axle Alignment Shims, Installation Hardware,....
  • TECHNICAL NOTES: Adjustable 1 to 3 inch front and 2 inch rear suspension lift..
  • INSTALLATION: Easy bolt-on installation takes 2 to 4 hours. A torsion bar puller, or 5 ton gear puller is required for install. An alignment is always....
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires. Our front MAX-Torsion....
Check Stock