ReviewsTon Floor Jacks

VEVOR 1.5 Ton/3300 LBS Low Profile Aluminum and Steel Racing Floor Jack with Dual Pistons Quick Lift Pump, Floor Jack Lifting Range 3-3/20"-14-10/27"

  • 3-Ton jack with Heavy-duty steel construction provides stability and endurance. Saddle lifts: 5-1/4'' to 18-1/4'' (133mm to 465mm).
  • Bullt-in safety valve protects against jack over-loading Complete with long two piece handle for ease of operation and reduced operator fatigue..
  • Swivel saddle and rear casters for floor jacks providesmooth maneuvering and positioning. “Quick Start” double pump technology for fast operation to contact point..
  • Rubber cushion on the saddle prevents marring of the lift. Cushion on handle prevents damage to the vehicle.
  • Low Profile jack complies with ASME PASE/2014 Safety Standard.
Check Stock

Nisorpa 6 Inch Swivel Trailer Jack with Dual Wheels RV Trailer Tongue Jack Marine Boat Trailer Jack 1500 lbs Capacity Heavy Duty Towing Track Caster 10 Inches Vertical Travel

  • Rubber jack pads, to avoid scratches and other damages between the car's rib and the metal part of the hydraulic jack or lifting platform..
  • Rubber block, in its upper part it has a groove to protect the underside of the vehicle and in the lower part, it has a thread to fit the piece on the hydraulic jack..
  • Made of high quality natural rubber, New polyurethane construction, still soft enough to prevent damage, yet hard enough to support the jack point..
  • Perfect for universal use. Fits most vehicles and floor jacks, please ensure fitment by checking listed dimensions..
  • Dimensions: 65mm diameter, 11mm groove depth 15mm groove slot width 10mm MEDIUM size.
Check Stock

Dumble 5th Wheel Tripod Stabilizer Gooseneck Trailer Jack - 5000lb Cap Adjustable RV Jack Stabilizer RV King Pin Tripod

  • [Reduce Movement in Your Mobile Home]: Whether camping for the weekend or living the full-timer life, the Dumble RV Supplies Heavy Duty RV Stabilizer Jacks will minimize front-to-back and side-to-side motion so you can enjoy your everyday activities discreetly.
  • [Physics At Work]: Align gooseneck camper stabilizer jacks under the king pin of your camper or motorhome to lift the front end of your trailer and adjust the center of gravity.
  • 5,000-pound (2.5ton) weight capacity adds support and enhances stability.
  • [Built to Last]: Steel RV fifth wheel tripod stabilizer jack is powder-coated to resist elements and provide optimal durability.
  • Zinc-plated chain keeps RV stand legs aligned for optimal strength and reliability.
  • [Fits Your Needs]: 4.5-inch (11.4cm) tall cup has a 3-inch (7.6cm) internal diameter to fit the king pin on your travel trailer, camper, boat, and mobile home.
  • Threaded bar makes it easy to adjust the cup height.
  • [Adjust and Store Easily]: King pin 5th wheel stabilizer jacks adjust to heights between 39 and 57 inches (99.1 x 144.8cm).
Check Stock

2 Ton Heavy Duty Floor Jack, Lifting Range 5-1/8\ to 13\

  • Floor jack has a 2 ton (4,000 lb) load capacity and features a minimum lifting height of 5-1/8 and a maximum height of 13".
  • The 2ton floor jack jack equipped with (2) large steel casters and (2) 360-degree swivel casters for smooth maneuverability.
  • The floor jack has a large saddle surface area for better contact with the load being supported.
  • Heavy duty steel construction provides long term durability,Built-in safety valve provides overload protection.
  • Service jack is built for extra lifting and maneuverability for all load lifting needs. Heavy-duty steel construction provides stability and positioning..
Check Stock

BAOSHISHAN 6 Ton Double Ram Bottle Jack 6-1/4\ to 15-3/4\ Lifting Range Hydraulic Welded Bottle Jack Car Jack

  • ...: 6 ton (12,000 lbs) | Max height: 400mm/15.75" | Min height: 160mm/6.30" | Total lift: 9.45" | Adjustable height: 60mm/2.36" (extension screw top) | Net Weight: 4.9kg/10.8lbs.
  • [WARRANTY] - BAOSHISHAN provides ONE-year Warranty for the double ram jack. If there is any oil leakage, damage or malfunction of the bottle jacks, please do not hesitate to contact the after-sales service to replace it..
Check Stock

JEGS 80077-1 Replacement Rear Caster For JEGS 3-Ton Aluminum Jack (555-80077)

  • Fits JEGS Professional Low-Profile 3-Ton Aluminum Floor Jack (555-80077).
  • Sold Individually JEGS 80077-1 rear caster is just one of the replacement parts offered for our 555-80077 professional low-profile 3-ton aluminum floor jack. Easily installed, the castor will help keep your jack mobile and safe..
Check Stock

SnapPad Xtra Permanently Attached RV Leveling Jack Pad for 9 inch Round Landing Feet (4-Pack)

  • ✅ FIT - Xtra fits 9” round metal feet on many Class A and 5th Wheel RVs. Please verify size of jacks (9”) before ordering..
  • ✅ PERMANENT - SnapPads can be installed in minutes but will stay on forever. Snap them on and rid yourself of all your leveling hassles. Say goodbye to crawling under your rig every time you set up..
  • ✅ STABLE - SnapPad increases stability in 3 ways: a larger footprint, more vibration dampening, and by conforming to uneven terrain like gravel. ANTI-SLIP - SnapPads are made from durable rubber that grips any terrain. No more popping jacks or slipping in high winds or on slick surfaces..
  • ✅ RUGGED - Our process uses recycled tire crumb, high strength resin, and a 100+ ton press to make SnapPads extremely durable. SnapPads are engineered to be resistant to UV exposure, water, heat, oil, tar, mud, and other environmental hazards. Protects your metal landing feet from damage..
  • ✅ ENVIRONMENTALLY FRIENDLY - Made in the USA from recycled American tires. WARRANTY - Two year manufacturers limited warranty..
Check Stock

SnapPad Xtra Permanently Attached RV Leveling Jack Pad for 9 inch Round Landing Feet (6-Pack)

  • ✅ FIT - Xtra fits 9” round metal feet on many Class A and 5th Wheels RVs. Please verify size of jacks (9”) before ordering..
  • ✅ PERMANENT - SnapPads can be installed in minutes but will stay on forever. Snap them on and rid yourself of all your leveling hassles. Say goodbye to crawling under your rig every time you set up..
  • ✅ STABLE - SnapPad increases stability in 3 ways: a larger footprint, more vibration dampening, and by conforming to uneven terrain like gravel. ANTI-SLIP - SnapPads are made from durable rubber that grips any terrain. No more popping jacks or slipping in high winds or on slick surfaces..
  • ✅ RUGGED - Our process uses recycled tire crumb, high strength resin, and a 100+ ton press to make SnapPads extremely durable. SnapPads are engineered to be resistant to UV exposure, water, heat, oil, tar, mud, and other environmental hazards. Protects your metal landing feet from damage..
  • ✅ ENVIRONMENTALLY FRIENDLY - Made in the USA from recycled American tires. WARRANTY - Two year manufacturers limited warranty..
Check Stock

INTBUYING Hydraulic Machine Toe Jack Lift (2.5/5t) Toe Jack Lift Hydraulic Machine Toe Jack Lift Air Hydraulic Toe Jack Proprietary Heat-Treated Steel

  • The load capacity can reach up to 5 Ton/11000 lbs (Top), and 2.5 Ton/5500 lbs (Toe)..
  • Widely used in the installation and maintenance of machinery and equipment, bridges, railway tracks.
  • transport heavy loads handing, car and tractor repair. This series of products use imported jacks, high quality steel after welding heat treatment, the specific structure is simple, easy to use, durable, high quality, safe and reliable..
  • It is from the top dual-use, ease of operation of the low is a versatile lifting tool..
  • This series of products operating handle is designed to rotate 180 degrees, angle exchange according to different places, which is more convenient to use..
  • Limited stock, please purchase ASAP if you want it..
Check Stock

BESTOOL Jack Stands 4 ton Jack Stand with Security Locking Pins, 8,000 lbs Capacity, 1 Pair, Black

  • BESTOOL jack stands uniquely designed circular base pads flat top rubber saddle protects the car frame better than the traditional curved axle post jacks stands. Provide maximum stability and safety, non-slip pad can be disassembled, replaced..
  • This car jack stand features mobility pin height adjustment mechanism provides 7 adjustable positions. Making it flexible for all of your needs and provides added security..
  • The rubber circular base pad protects against scratching paint. Stand has a powder coated finish to prevent rusting.The minimum height of this jack is 13.4 inches and the maximum height is 19.9 inches with a 4 ton (8,000 lb) load capacity..
  • Jack stands 4 ton constructed of high-grade forged steel with a welded frame design for durability.Wide pyramid foot base provides added strength and stable support..
  • This jack stand is perfect for modern low ground clearance cars. it handles a wide range of vehicles including small cars, SUVs, and light duty trucks, jeeps, ATV's, UTV's, and more..
Check Stock

BIG RED Torin Hydraulic Trolley Floor Jack Combo with 2 Jack Stands, 2 Ton Capacity (T82001)

  • Hydraulic trolley service/floor jack combo includes (1) floor jack and (2) jack stands, providing you with the essentials to lift and support most cars.
  • Constructed with heavy duty steel, providing long term durability.
  • Floor jack has a 2 ton (4,000 lb) load capacity and features a minimum lifting height of 5-1/4" and a maximum height of 13-3/8".
  • Equipped with (2) large steel casters and (2) 360-degree swivel casters for smooth maneuverability.
  • Equipped with a safety bypass system prevents over-loading and ensures safe operation.
  • built-in carrying handle allows the floor jack to be lifted quickly for ultimate portability.
  • Jack stands feature an adjustable height that ranges from 10-13/16" to 16-9/16" with a 2 ton (4,000 lb) load capacity.
  • Multi-position ratchet bar has a sawtooth design, allowing for quick height adjustments that lock into place.
Check Stock