ReviewsTool Belt For Homeowner

3458 A/C Belt Installation Tool Compatible with BMW V8 N62 Engines - BMW Power Steering Pump Drive Belt Tool Same as OEM 641040 & 8380049451

  • 【Fit For】Compatible with BMW N62 (V8) Motors in 2004 through 2006 models with the stretch belt..
  • 【Perfect Design】This BMW A/C Belt Installation Tool is crafted for utilization when no belt tensioner is employed on 2004 to 2006 V8 N62 engines with stretch belts..
  • 【Easy Installation】Easy to installation ,Without this tool, its almost impossible to mount the AC belt. With this tools very easy to install AC belt. install it only took less than five minutes..
  • 【Perfect Tool】The perfect tool for the job of installing BMW A/C belts , if you need to install the A/C belt on your BMW, you need this tool.Tool is a must have if putting a belt on that has no spring assist. Any other way could cause damage to actual pulley..
  • 【Package Included】1* A/C Belt Installation Tool for BMW.
Check Stock

TRUTUCH Nylon and Leather Tool Belt | Nylon Tool Rig Set | Nylon Tool Pouch | Leather Tool Bag | Carpenter | Construction | Framers | Electrician (Black)

  • This Belt Tool Pouch is Double layered Nylon with exclusive Top Grain leather Foaming Belt. Total 11 Pockets of this Extremely Abrasion Resistant durable Nylon Tool Case. This Construction Belt is light weighted and has Foam padded belt which is adjustable to fit waist sizes from 30 to 47 inches. Belt thickness is 4 mm-4.50 mm..
  • 2 large capacity tool pouches made by Nylon which have a soft foaming sheet of 3 mm. 1 Belt, 1 Hammer holder & small size pocket so you can carry a large number of tools in this Electrician Tool Bag. Our Construction Tool Belt is Perfectly stitched with Tear and Wear protection..
  • Double stitching and strengthening for additional support. Rivet reinforced stress points and corners for long lasting durability..
  • Framers Tool Belt has Space for every Handy Tool including deep Pockets for Nuts & Bolts, Nail & Screws, Tape measure hanger, Pencil Holders, Hammer Holder and much more..
  • Ideal for Carpenters, Framers, Construction, Electrician, Handyman, Builders & Woodworkers..
Check Stock

Tool Belt Suspenders Tool Harness for Heavy Duty Work ,Movable shoulder Pads, Quick Clip Suit for CLC, Husky,Dewalt Tool Belt (Black)…

  • ✅Heavy Duty Padded Comfort Belt - -3'' Wide Double Layer Polyester Fabric With Foam Padding.
  • Each Belt Loop With Durable Bartrack for easy tool pouch & rig support.
  • ✅Padded Tool Belt-- Foam Padding With Thick And Breathable Mesh.
  • ✅ Electrician tool belt Work Belt --2inch Durable Double Metal Roller Buckle.
  • ✅Fit Waist Sizes 29inch to 46 inch, Unique Design To Make Adjustable Very Easy.
  • ✅Work Tool Belt Perfect fit Padded Tool Belt Suspenders Make Your Work In Comfortable Case (SW001 , SW101, SW201A Tool Belt Suspenders -Sold Separately ).
Check Stock

Garden Hose Nozzle Heavy Duty Brass Metal Sprayer Nozzle High Pressure Spray Gun 360° Rotaing Water Adjustmen for Car Washing, Outdoor Gardening, Pets Shower, Patio Cleaning

  • ...long lifespan. You can use it for years without worrying about it rusting, corroding, or breaking down. Its durable construction means that it can withstand regular use without losing its functionality or performance. You'll be able to rely on this nozzle for years to come, making it a sound investment for any homeowner or gardener..
  • 【Wide Application】- This nozzle's standard 3/4" hose thread makes it compatible with most garden hoses, allowing for easy installation and use. It is suitable for a wide range of applications, including watering plants, washing cars, cleaning patio furniture, and more. You can use it in your home, garden, or garage, making it a versatile tool that you'll reach for time and time again. Its wide application makes it an essential item for any homeowner or gardener looking for a reliable and versatile hose nozzle..
Check Stock

Tool Belt Suspenders Construction Suspender 3 point Padded Suspenders

  • Weight off our tool belt -- the 3 point padded suspender fits most tool belt systems, distributing the pressure on the hips to the shoulders, so that your pants will not fall off! The thick padding design spreads the weight evenly and comfortably on the shoulders and neck, you won't be sore all day long!.
  • Padded tool belt suspender -- the 1.3-inch thick padder contains ample soft foam padding, and the contact surface is a breathable mesh structure. It is breathable and can well cushion the weight of the tool belt without absorbing heat and moisture..
  • One size fit most -- Adjustable shoulder clip to easy fit your size and not slide once it is secured. This tool belt suspender can hold your tool belt up just like they're supposed to..
  • High Quality Steel Hook with Nickel Plating -- hard and durable 360° rotatable steel hook can be tightly hooked to your tool system, and three additional high-density nylon webbing belts can be used with the revolving hook perfectly..
  • Build your own heavy-duty tool belt -- this construction suspender is also suitable for heavy duty work or climbing work on scaffolding or truss..
Check Stock

21 Pocket Carpenter Tool Belt, Tan - Adjustable - Padded Leather Tool Belt for Carpenters/Electricians/Framers

  • ✔️ 21 POCKET PRO framing carpenter tool belt designed with speed square pouch and tape measure pocket sized to fit 26' fat max tape easily, with specific locations for your roofing square, chisel, cats paw pry bar, combination square, and phone, a professional construction toolbelt rig.
  • ✔️ HEAVY DUTY hardware with double capped zinc alloy rivets in gunmetal gray and heavy duty Nylon thread stitching for tough conditions, true craftsmanship using genuine full grain leather to deliver quality carpenter's tool belts.
  • ✔️ FULLY ADJUSTABLE system allows you to set it up your way, having a single fastner bag and a single tool bag you can adjust and customise it to suit a left hand or right hand setup, pouch handles on top allows you to carry and hang up your tool belt easily.
  • ✔️ MULTIPLE TRADES - this professional tool belt is perfect for multiple trades, tool bags for carpenter, electrician tool belt, framers tool belt, and also ideal for any task, drywall, roofing, framing, flooring or even the general handyman doing some DIY. This work belt fits waist sizes 30inch to 45inch.
  • ✔️ COMFORT - an extra wide diamond stitched padded support belt helps you support your back from the work load. Fits 30 inch waist to 45 inch waist.
Check Stock

DEWALT DG5449 Pro Framer's Combo Tool Apron, 15 Pocket

  • Heavy duty tool apron: this tool apron is made with heavy-duty leather to take on any job..
  • Easy carry handle: tool pouch handle is designed for easy one-hand carrying..
  • Leather tool belt: This tool belt features leather sleeves to hold combination square and pry bar..
  • Durable tool belt: This tool apron features a heavy-duty belt with double-tongue roller buckle fits waist sizes 29"- 46"..
  • Double-gusset pockets: This tool apron has Double-gusset front pockets for added capacity and easy access..
Check Stock

CLC Custom Leathercraft IP489X Suede Tool Bag & Poly Web Belt 3 Pocket Tan

  • DURABLE TOOL BAG: This tool bag is made with heavy duty suede leather for added durability..
  • 3 POCKETS: This tool bag features two main nail and tool pockets, one smaller pocket fits pliers, pencils, nail sets, etc..
  • DURABLE TOOL BELT: 2" poly web tool belt with quick release buckle.
  • HAMMER LOOP: This heavy duty tool bag and belt has a leather side loop for hammer or combination square holder and clip for a tape measure.
Check Stock

Tool Belt, Heavy Duty Construction Tool Belt, 29 Inch to 42 Inch Brown and Black Adjustable Tool Belt, Work Apron, Tool Pouch

  • 【12 Placement Positions】- This tool belt is equipped with 12 placement positions, 5 main nail and tool pockets, 4 smaller pocket fits pliers, pencils, nail sets, gauges, etc. There are also 2 steel hammer loops and 1 steel clip to hang your measuring tape..
  • 【High-quality Materials】- This adjustable tool belt is made of heavy duty grade 600D polyester and rust proof rivet, it is wear-resistant, durable, waterproof and rust-proof.
  • 【Adjustable Belt】- The tool belt includes a strengthened nylon 2-inch wide belt that can be adjusted to fit 29 to 42 inches which makes it easy for anyone to use. Additionally, the tool belt can be worn on back when you squat down or bend down..
  • 【Improve Efficiency】- This tool belt provides convenient access to all your tools right on your hips! Not longer will you need to take multiple trips to get tools, this will greatly improve your work efficiency..
  • 【Wide Application】- This heavy duty construction tool belt is perfect for construction workers, contractors, carpenters, framers, plumbers, electrician, etc. It is also perfect choice for boyfriends, husbands, fathers, or holiday gifts..
Check Stock

CLC Custom Leathercraft 6714 Heavy Duty Framers 5 Piece Comfort-lift Combo Tool Belt Apron, 31 Pocket

  • COMFORTABLE TOOL APRON: Unique, padded suspenders engineered to carry loads comfortably and distribute weight evenly without strain on lower back and hips are featured on this CLC tool belt..
  • COMFORTABLE FIT: 5 wide padded comfort belt with double tongue steel roller buckle.
  • 31 POCKET TOOL BELT: New and improved pockets with more capacity and easy access to contents in tool belt..
  • CARRY LARGER TOOLS: Tool belt has metal hook to carry cordless drill, nail guns or other power tools.
  • SPILL PROOF: Easy carry handle design on this tool belt provides for simple adjustments and easy storage without spilling contents.
Check Stock

12 Pockets Carpenter Oil Tanned Leather Tool Belt | Builder Work Belt Apron For Men | Tool Holder Work Organiser For Builders, Carpenters, Gardeners, Electricians, Diy Er

  • 12 Pockets Carpenter Oil Tanned Leather Tool Belt.
  • Multipurpose: leather tool belt, tool bag, tool pouch for carpenter tools and framers tool belt, works great for handyman or handywoman tools also||Ideal for fence building projects.
  • constructed From Durable, Heavy Duty Grade Leather & Reinforced With Rust-Proof Rivets.
  • Convenience - So many pockets for every tool - you'll never run out of space for your tools. Perfect for any type of job - from a handyman to everyday heavy lifting of carpenter, construction worker, electrical engineer, carpenter tools, framers, you name it! This leather tool belt bag can handle any job.
  • Keep your pliers, hammers, tape measures and fasteners within easy and organized reach with our tool belt! With 12 pockets, 2 steel hammer loops and a steel clip to hang your measuring tape, it is capable of carrying all your primary carpentry tools and your secondary working tools anywhere you work. No longer will you need multiple trips to carry your tools to a location. It saves time and makes you more efficient.
  • Ideal for gifting your father, son, brother , boyfriend , who loves to do projects which involves a lot of tools to carry.
  • 100% REAL GENUINE LEATHER! Heavy duty stiching.
  • Our tool belt allows for simple belt adjustments, ea....
Check Stock