ReviewsTool Box Gas Strut

MOCA 171424 171425 2pcs Front Complete Strut Spring Assembly Shock Absorber Driver & Passenger Side fit 2000-2003 Mazda Protege & 2002-2003 Mazda Protege5

Fits: 2000-2003 Mazda Protege 1.6L 1.8L 2.0L L4 GAS, 2002-2003 Mazda Protege5 2.0L L4 GAS strut assembly..
Replace Complete Strut Assembly NO#: 171424 171425, 3066 3067, 2701505601 2701505602, CST100343, 75-21981CS etc..
Superior Quality Meets or Exceeds OE Specification, fully loaded complete unit is safe and easy to install..
One-piece complete strut assembly includes coil spring, strut mount, boot, bumper kit, spring seat and isolator..
US friendly after-service team to resolve your issues in time, parts have worry-free 2 years or 60000 miles warranty..

Check Stock

Lid Support Hinge Heavy Duty Soft Close 44lb Gas Spring with Soft Close Support Heavy Drop Lids for Soft Close Pack of 2

STURDY LID HINGE WITH SOFT CLOSE—The lid support hinge heavy duty is made of cold-rolled steel in Satin Nickel, and sturdy load-bearing material....
MAX SUPPORT 60lb---Gas strut fit most of the lids of box which weight of your lid: 30lb-60lb and with a 9 inch clearance.
GENTLY CLOSING HEAVY DUTY LID--Pressure: 200N/30lb (per Strut), Max Weight Support--60lb/2pcs. Based on steel cylinder construction, The hinge is easy....
SAFETY LID HINGE WIDELY USAGE---Lid stay designed to support lids of box, such as toy box, heavy bench lid, blanket chest, The hinge will slowly drop....
EASY TO INSTALL—Only install the screws and one screwdriver, it will take only 3 minutes. Comes with 2 pack, screws included in package for....

Check Stock

Detroit Axle - 1.7L Front Struts and Coil Spring Assemblies Lower Control Arms w/Ball Joints Sway Bars Tie Rods Replacement for 2003-2005 Honda Civic - 12pc Set

Replacement for 2003-2005 Honda Civic (All 1.7 Gas Models (Excludes SI models)).
Kit Includes: (2) Quick Install Ready Strut and Spring Assemblies, (2) Front Lower Control Arms, (2) Lower Ball Joints, (2) Front Sway Bars, (2) Outer Tie Rods and (2) Inner Tie Rods.
Detroit Axle Strut Assemblies are complete and ready for installation with no additional work or special tool required for installation.
Undergo impact, wear, and fatigue testing to help ensure quality and durability.

Check Stock

OEMTOOLS 27036 10.75 Inch MacPherson Strut Spring Compressor, Set of 2 Universal Spring Compressor Tool Automotive, 9.75 Inch Maximum Safe Opening, Carrying Case Included

WIDE RANGE OF COMPATIBILITY: Compress most sizes of MacPherson strut springs with the OEMTOOLS strut spring compressor.
Quickly and safely compress the strut spring for easy replacement of the strut cartridge or strut assembly repair.
LOCKS INTO PLACE: Safer spring compression with broad spring contact and built-in detent pins.
Strut coil spring compressor tool makes changing front and rear struts safer and easier.
LONG LASTING: Strut compressor’s forged hooks and hardened center screw are designed to make this strut spring removal tool the longest lasting on the market.
OTHER FEATURES INCLUDE: MacPherson Spring Compressor features heat-treated forcing screw and safety latches for locking hook to spring.
These spring compressors are thoughtfully designed to be safe to use.
AUTOMOTIVE SUSPENSION TOOLS: MacPherson struts are the most important element of many modern suspension systems and should be replaced, on average, every 50,000 to 80,000 miles.
These automotive tools from OEM TOOLS get the job done.
Broad spring contact and built in detent pins help to lock the spring into place for safer spring compression.
Hooks are forged and the center screw is hardened for long life.

Check Stock

Apexstone 160N/36lb 10 inch Gas Struts, Gas Shocks, Gas Springs, Gas Strut Lift Support 160N Hinge, Lid Stay, Set of 4

Length ( hole center to hole center) :9-11/16”.
Travel:3-14/25” ,Distance between ball mounts compressed: 6-1/8″.NOT SOFT CLOSE GAS STRUT!!!.
36 lb Gas Shocks Perfectly suitable for truck toolbox lid, RV door, cabinet lid, bed with storage,and other DIY projects.WORKING TEMPERATURE: -10 ℃ – 40 ℃/14℉-104℉.
Lids soft open gently,Ideal for supporting the lid to keep it open,Support opens lids to a maximum angle of 90 degrees,it fit for the door/lid which the WIDTH is Less than 20 inch , the WEIGHT is between 36 and 72 lb.
INSTRUCTIONS&SCREWS INCLUDED In the package,While you can feel free to Click “Ask Seller” Besides Your Order for In-time Assistance.
We offer 1 YEAR 100% SATISFACTORY WARRANTY, if unfortunately our 35 LBS GAS STRUT did not work well ,please kindly contact us for exchange, refund or return.

Check Stock

11Inch Gas Spring Prop Strut Shock Lift Support for RV Door Motorhome Door Compartment Door Cargo Door and other DIY Applications 500N

【Premium Quality Making Material】 -This rv compartment door hydraulic hydraulic gas spring is made of precision steel pipe, which is flexible and....
【Long Serving Life and Sturdy】 -This gas strut hood lift is strong and not easy to break, good performance in durability,a good replacement for....
【Convenient To Install】 -Open the lid or door to the position you want.Take about 20% of the lid length as the upper installation point.
【Detailed Specification】 -This gas spring Type: Gas Spring Center Distance: Approx. 280mm / 11in Stroke: Approx. 100mm / 3.9in Pressure: 100N,....
【Wide Of Applicated】 -This gas spring is suitable for equipment flip lid, snack car flip door, advertising bar, light box, flip window and hood....

Check Stock

Apexstone 45N/10lb 10 inch Gas Struts, Gas Springs, Gas Strut, Lift Support, Gas Shocks, Lid Stay, Lid Support, Set of 4

Lids soft open gently,Ideal for supporting the lid to keep it open.
Length ( hole center to hole center) :9-11/16”.
Travel:3-14/25” ,Distance between ball mounts compressed: 6-1/8″.
Support opens lids to a maximum angle of 100 degrees. WORKING TEMPERATURE: -10 ℃ – 40 ℃/14℉-104℉mm)..
Instructions Included, Screws Included. This gas strut is okay for rv cabinet door ,can ,toolbox etc..
We offer 1 YEAR 100% SATISFACTORY WARRANTY, if unfortunately our SOFT OPEN LID GAS STRUT did not work well ,please kindly contact us for exchange, refund or return.

Check Stock

20 inch 100 LB Gas Prop Struts Shocks 20' 445N Lift-Support Gas Spring with Mounting Brackets for Heavy Duty Cabinet Tool Box RV Bed Floor Hatch (Suitable Support Weight: 85-110lbs)

✅20 inch gas strut 100lb - Extended Length A (Center-to-Center):19.7"(500mm), compressed length B (Center-to-Center): 11.8"(300mm),Force 445N/100Lb Per Strut, 2 Struts Per Pair.
Package contents: 2 * struts, 4 * L brackets, 4 * nuts, 1 * Installation Instruction.
✅20 inch gas shocks 100lb - ARANA 20" 100lb shocks will be suitable for heavy lids, with lid weight between 85-110lbs, side length ≥ 32 inch.
Note: DO measure the lid weight to avoid buy wrong items.
✅20 inch lift support struts - ARANA 20" struts are designed with L type mounting brackets, all the ball ends and brackets could be unscrewed and rotated to suit for different installation demands.
✅20 inch gas springs - ARANA 20 inch 100lb struts are widely used on the indoor/outdoor furniture such as RV bed, motorhome bed, tanning bed, camper bed, travel trailer bed, garbage box, generator house, outdoor bench lid, floor hatch door, ad board, custom-built window, etc, as long as the lid weight is between 85-110 pounds.
✅ About installation & support - once you need any installation guide, welcome to message us for in-time help.
if there are any product defects, unfit problem or part missing, 18 months replacement support will be provided if let ARANA know!.

Check Stock

12 Inch 135lb/600N Adjustable Heavy-Duty Gas Shock Strut Spring for Tool Box RV Bed Cabinet Boat Cover Door Lid and Custom Projects Without Mount Bracket.

【PRODUCT FEATURE】The 12in gas spring is PRESSURE-ADJUSTABLE. You can use the wrench included with the package to release the gas inside the gas....
【PLACEMENT】Most used for Heavy-Duty equipment such as bed with a small compartment, outdoor TV Cabinet, marine projects, heavy toolbox lid, camper....
【PARAMETER】Extended Length: 12IN(300mm).Maximum Pressure: 600 N/135Lbs Per Strut.Super Strong and stiff, you couldn't compress them by your hand!!....
【ADJUSTMENT TIPS】 Only release the gas in one-second bursts to avoid releasing too much gas. Repeat the process until the gas strut is behaving as....
【12+1 MONTH REPLACEMENT】Welcome to Click "Ask Seller" BESIDE YOUR ORDER for In-time Assistance if any problem occurs..

Check Stock

MAXXHAUL 50218 Aluminum A-Frame Trailer Tongue Box

- Our MaxxHaul Trailer Tongue Box is designed for mounting on trailers with A-Tongue frame to provide extra storage for your tools, camping gears,....
- Made from durable and corrosion-resistant light-in-weight aluminum material with fully welded seam construction and rigid powder coat finish.
- Diamond plate pattern provides added strength and help keeps its shape for added durability.
- Features a gas strut to assist in opening the lid, hold lid in place and soft closing..
- Box measures 29" long x 18" tall and 17" wide with 15" long front..

Check Stock

2 Truck Upfitters 16' Gas Props (15.7' ext, 9.4' Compressed, 55 lbs of Pressure ea) Compatible with are, ATC, Snugtop, Leer Campers. Measurement REQ'D! Incl 4 Ball mounts+Angled & Straight Fittings!

CHECK LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL TOPS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE! Use a measuring tape to measure the door gas strut that you are replacing. Measure from the CENTER of the gas prop head (little plastic end), to the other side. DO NOT measure from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5% size variation..
Truck Upfitters Pair of 55 pound (each) gas struts. 15.7" extended length and 9.4" compressed length. This size of door shock absorber is for tall medium/heavy weight rear or side camper shell doors. Each canopy shock has 55 lbs of pressure, for a total of 110 lbs of pressure. Please note that this does not mean that it can lift something that is 110 lbs. the typical hinged-style door weight for this prop is approximately 70-90 lbs, including the weight of the camper shell locks and keys..
These gas lift cylinders do not fit all camper shell brands / models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. Please see pictures to determine how to measure. Do NOT measure from end to end. Measurement must....

Check Stock