ReviewsTool Holding Systems

Precision Twist M40CO Cobalt Steel Short Length Drill Bit, Bronze Oxide Finish, Round Shank, Spiral Flute, 135 Degree Point Angle, 17/64\ (Pack of 12)

  • High-speed steel (HSS) containing cobalt is a good combination of toughness and hardness, for use on drilling through hard substances.
  • Gold oxide, retains cutting fluid and prevent chip to tool welding.
  • 135-degree split point angle is self-centering, reduces walking, good for hard material and reduces pressure on cutting edges.
  • Short-length, for better rigidity and increased strength.
  • Round shanks, for use on a variety of tool-holding systems.
Check Stock

Drill America - GLBCOX121/4 1/4' x 12' Cobalt Aircraft Extension Drill Bit, GLBCO Series

  • Effective in drilling tough, high tensile strength materials like stainless steel, inconel and titanium.
  • 135° split point tip prevents drill from walking.
  • Round shanks allow use with a wide variety of tool holding systems.
  • Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools.
  • performance is similar to uncoated tools.
  • 12" overall length for drilling where extra length for reach is required.
Check Stock

Drill America GLBCOX65/32 5/32' x 6' Cobalt Aircraft Extension Drill Bit, GLBCO Series

  • Effective in drilling tough, high tensile strength materials like stainless steel, inconel and titanium.
  • 135° split point tip prevents drill from walking.
  • Round shanks allow use with a wide variety of tool holding systems.
  • Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools.
  • performance is similar to uncoated tools.
  • 6" overall length for drilling where extra length for reach is required.
Check Stock

Sandvik Coromant CoroCut 2-Edge Carbide Profiling Insert, GC1005 Grade, Multi-Layer Coating, 2 Cutting Edges, N123F2-0318-RO, 0.0626\ Corner Radius, F Insert Seat Size (Pack of 10)

  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid tool holding systems.
  • Profiling - Coro Cut, Inserts Coro Cut 1-2 and 3 / Coro Cut 1-2, Profiling, Ground Insert.
Check Stock

Dormer A978 Cobalt Steel Extra Long Length Drill Bit, Parabolic Flute, PFX Style, Uncoated (Bright) Finish, Round Shank, 130 Degree Point Angle, 6.50mm

  • Extra-length drill bits have longer flutes and overall lengths than Jobber drill bits, for deeper holes.
  • 130-degree point angle has good centering capabilities and reduces pressure on cutting edges.
  • High-speed steel (HSS) containing cobalt is a good combination of toughness and hardness, for use on drilling through hard substances.
  • Bright finish with Smooth-Flow coating reduces coefficient of friction, has efficient chip evacuation and extends tool life.
  • Round shanks, for use on a variety of tool-holding systems.
Check Stock

Dormer A977 Cobalt Steel Extra Long Length Drill Bit, Parabolic Flute, PFX Style, Uncoated (Bright) Finish, Round Shank, 130 Degree Point Angle, 6.50mm

  • Extra-length drill bits have longer flutes and overall lengths than Jobber drill bits, for deeper holes.
  • 130-degree point angle has good centering capabilities and reduces pressure on cutting edges.
  • High-speed steel (HSS) containing cobalt is a good combination of toughness and hardness, for use on drilling through hard substances.
  • Bright finish with Smooth-Flow coating reduces coefficient of friction, has efficient chip evacuation and extends tool life.
  • Round shanks, for use on a variety of tool-holding systems.
Check Stock

Camrusic Car Soldering Plier Wire Welding Clamps, Pick‑Up Aid Plier Hand Tools for Automobile Maintenance Repairing Vehicle

  • 【Product Advantages】This metal soldering pliers is made of stainless steel, it is hard and durable with long service life. Strong stability and high quality, can be used directly, safe and reliable in use,which is a wonderful tool for daily car repairing..
  • 【Convinent to Use】This special clamp allows you to weld the cables together while keeping one hand in charge of the welding.Professional Designed for holding two wires while they are soldered together, the lower jaw opens up on both sides to facilitate cable positioning..
  • 【Design】 Designed for holding two wires while they are soldered together, the lower jaw opens up on both sides to facilitate cable positioning..
  • 【Strict Testing】 Strong stability and high quality, can be used directly, safe and reliable in use. Establish compliance with standard specifications and strictly follow factory quality control to ensure excellent performance..
  • 【Note Tips】In some electrical systems, it is not possible to use the cars connector, which generates resistance, such as vehicle alarm..
Check Stock

Cleveland 2120 Style High Speed Steel Short Length Drill Bit, Uncoated (Bright), Round Shank, 118 Degree Point, Wire Size #17 (Pack of 10)

  • Screw machine length, for rigidity and strength.
  • High-speed steel (HSS) for use on a wide variety of materials.
  • Uncoated (bright), for use with a wide range of drilling materials.
  • 118-degree conventional point angles, for general drilling applications.
  • Round shanks, for use on a variety of tool-holding systems.
Check Stock

LE-JX 6488 SOHC 4.0L V6 Cam Service Timing 7 Tools Kit/Chains,Head Gaskets,Camshaft,Valve Train Repairs Tool Compatible with 1997~2011 Ford 4.0L Explorer/Mercury/Mountaineer SOHC V6 Engines

  • -Fitment: Compatible with 1997~2011 Ford 4.0L Explorer/Mercury/Mountaineer SOHC V6 Engines..
  • -Function: cam service timing tools ensure correct cam timing when servicing timing belts chains head gaskets or other valve train repairs..
  • -Superior Steel: It is made of high quality heavy duty steel with black finish and meets the original specifications..
  • -Includes 7 Tools: 6478 Ford Camshaft Gear Holding Tool,6479 Ford Crankshaft Holding Tool,6480 Ford Camshaft Holding Tool Adapter,6481 Ford Camshaft Holding Tool,6482 Ford Camshaft Gear Holding Tool Adapter,6484 Ford Timing Chain Tensioner Tool,6485 Ford Camshaft Gear Bolt Socket & Extension..
  • -Great Service Support: Our offer comprehensive pre-sales and after-sales service for this tools.If you have any questions,please contact us right now..
Check Stock

E-cowlboy Replace for OTC 6488 Ford SOHC 4.0L V6 Cam Service Timing Tool Kit for 1997~2011 Ford 4.0L Explorer Mercury Mountaineer SOHC V6 Engines Heavy Duty Steel (7 Tools)

  • Great Compatibility Works on 1997~2011 Ford 4.0L Explorer and Mercury Mountaineer SOHC V-6 engines..
  • Benefits Ensure correct cam timing when servicing timing belts chains head gaskets or other valve train repairs..
  • High Quality Advanced heavy duty steel with black finish, durability, anti-deformation and anti-corrosion. High precision and hardness to provide a much longer service life..
  • Includes 7 Necessary Tools 6478 Camshaft Gear Holding Tool / 6479 Crankshaft Holding Tool / 6480 Camshaft Holding Tool Adapter / 6481 Camshaft Holding Tool / 6482 Camshaft Gear Holding Tool Adapter / 6484 Timing Chain Tensioner Tool / 6485 Camshaft Gear Bolt Socket & Extension..
  • 100% Satisfaction Guarantee If you're not 100% satisfied with our tools, simply return it for a full refund in 30 days. Support 12 months Warranty. Professional & Sincere Service allows you to take no risks to purchase in E-cowlboy!.
Check Stock

Occidental 5059 High Mount Hammer Holder, Hand Made in the USA with Highest Quality Belting Leather, with a Lumintrail Keychain Light

  • Made of highest quality Belting Leather, this hammer holder is compact and very comfortable.
  • Hand Made in the USA providing excellent form and function.
  • Quadruple riveted holder provides superior holding strength for hammer.
  • With 38 years of field tested designs, you can be assured that you're purchasing the most unique and hardest-working tool systems in the business.
Check Stock