ReviewsTooth V Belt

Universal Waterproof Bluetooth Audio Receiver RCA Output Converter Car Boat Bike

  • Automatically reconnects with the last blue tooth device A2DP Stereo Audio.
  • 12v Remote Turn on for Amplifiers Connection Range: Up to 30 ft.
  • Remote turn on comes on when streaming media Water resistant.
  • Upgrade existing non blue tooth radio RCA output.
Check Stock

Fenner Drives 0418010SL PowerTwist Plus V-Belt, 3L Profile, 3/8\ Width, 5ft Length Red

  • Drop-in replacement for traditional V-belts.
  • same horsepower ratings as classical rubber V-belts..
  • Easier faster installation. Make to required length and roll it on. No wasted time dismantling drive components..
  • numerous belt lengths from just one box..
  • Longer belt life then rubber V-belts. Reduced vibration means less noise and increased component life.
Check Stock

Centrifugal clutch Go kart clutch Predator 212 clutch 3/4" Bore 10 tooth with bolt Compatible Predator 212cc 196CC & GX160 GC160 Up to 6.5 hp Engine

  • Centrifugal Clutch 3/4" Bore 10 tooth Compatible whit 212cc 196CC 2hp-7hp Engines.
  • Centrifugal Clutch 3/4" Bore 10 tooth Compatible whit GC160, GC190, GX120, GX140, GX160, GX200 2hp-7hp Engines..
  • Centrifugal Clutch 3/4" Bore 10 tooth Compatible whit B&S Tecumseh 2-6.5 HP and with 3/4” with 3/4" Bar Shaft and 3/16" Key Way engines..
  • Centrifugal Clutch 3/4" Bore 10 tooth Compatible whit Single Wheel Belt Direct Drive Karts with Tires No Larger Than 15" Tall..
Check Stock

RuiLing 2pcs GT2 Aluminum Alloy Synchronous Wheel 3D Printer Accessories 20 Teeth Bore 5mm Timing Pulley for Width 6mm Open Timing Belt

  • Type: 2pcs GT2 Timing Pulley, Teeth Number: 20 Teeth, Inner Bore Diameter: 5mm, Outer Diameter: 16mm.
  • Made of high quality aluminum alloy, with fine workmanship, smooth surface, rust and corrosion resistant, sturdy and durable to use..
  • Designed specifically for linear motion, round tooth profile guarantees that the belt tooth fits smoothly..
  • Fixed Mode: 2pcs Fastener screws for each pulley, which have already been screwed in the pulley, come with a mini wrench for convenient installation..
  • Application: Perfect choice for 3D printer or similar projects, suitable for 6mm width GT2 timing belt and 5mm shaft stepper motor..
Check Stock

Blue~Tooth Amplifier, DROK 2 Channel Wire~Less Audio Stereo Receiver Board 50W+50W 12V 24V 2A, BT 5.0 Hi-Fi Mini Power Amp with Blue~Tooth/AUX/USB Input for Headset Speaker Home Sound System DIY

  • Parameter --- Power supply voltage: DC 5-27V, over 2A (the best input range is 8-24V), can be powered by 12V or 24V.
  • Output power: 50W+50W, recommended 4Ω/8Ω speakers.
  • Blue~tooth/AUX/USB Input --- This stereo amplifier board supports three types of input: 1. Blue~tooth 5.0, as being designed with a PCB antenna, in the condition of no obstruction, the visible distance of the connection can reach 15m, but do note that it must be far away from the router when using it.
  • 3. Type-C port for USB input. When being powered on, default to enter Blue~tooth mode..
  • HD Sound Quality & Volume Control --- With the LC filtered output, the sound played by this power amplifier can be high quality, clean and pure. By effectively reducing electromagnetic interference, it won’t get much background noise. And the volume control is easy to operate: rotate to turn up or down.
  • Heat Dissipation --- Pure aluminum heat sink and shell heat dissipation, by which the large heat dissipation area to ensure high power and high performance operation..
  • Protection --- Anti-static, power supply anti-reverse connection, short circuit protection, overheatin....
Check Stock

Centrifugal clutch Go kart clutch Predator 212 clutch 3/4" Bore 12 tooth with bolt Compatible Predator 212cc 196CC & GX160 GC160 Up to 6.5 hp Engine

  • Centrifugal Clutch 3/4" Bore 12 tooth Compatible whit 212cc 196CC 2hp-7hp Engines.
  • Centrifugal Clutch 3/4" Bore 12 tooth Compatible whit GC160, GC190, GX120, GX140, GX160, GX200 2hp-7hp Engines..
  • Centrifugal Clutch 3/4" Bore 12 tooth Compatible whit B&S Tecumseh 2-6.5 HP and with 3/4” with 3/4" Bar Shaft and 3/16" Key Way engines..
  • Centrifugal Clutch 3/4" Bore 12 tooth Compatible whit Single Wheel Belt Direct Drive Karts with Tires No Larger Than 15" Tall..
  • Go Kart Clutch kit：Clutch and bolt & hexagonal wrench.
Check Stock

National Hardware N233-247 3219BC Wall/Ceiling Mount Single Pulleys in Zinc, 1-1/2 in.

  • 30 contact with the tooth side which minimizes the risk of the belt slipping..
  • Used widely in milling machine, 3D printer, drilling machine or other machinery transmission..
Check Stock

uxcell Aluminum 30 Teeth 25mm Bore 5.08mm Timing Belt Pulley for 10mm Belt

  • 30 contact with the tooth side which minimizes the risk of the belt slipping..
  • Used widely in milling machine, 3D printer, drilling machine or other machinery transmission..
Check Stock

uxcell Aluminum 30 Teeth 12.7mm Bore 5.08mm Timing Belt Pulley for 10mm Belt

  • 30 contact with the tooth side which minimizes the risk of the belt slipping..
  • Used widely in milling machine, 3D printer, drilling machine or other machinery transmission..
Check Stock

Phoenix V-Belt Pulley - 5/8in. Bore, 4 1/2in. Outside Dia.

  • Price For: Each Set Screw Included: Yes Construction: Spoked Number of Grooves: 1 Item: V-Belt Pulley Pulley Bore Type: Fixed Bore Pulley Type: Standard V-Belt Pulley For V-Belt Section: 3L, 4L, A Bushing Required: None Pulley Material: Die Cast Zamak 3 Pulley Bore Dia.: 3/4" Pulley Outside Dia.: 7.00" 4LA or A Belt Pitch Dia.: 6.85" Keyway Size: 0.187" x 0.093".
  • 4L, A, or AX Belt Pitch Dia.: 6.85" 3L Belt Pitch Dia.: 6.55" Fits Shaft Dia.: 3/4" Country of Origin (subject to change): United States.
Check Stock

uxcell Aluminum 40 Teeth 10mm Bore 5.08mm Pitch Timing Belt Pulley for 10mm Belt

  • 40 contact with the tooth side which minimizes the risk of the belt slipping..
  • Used widely in milling machine, 3D printer, drilling machine or other machinery transmission..
Check Stock