ReviewsTooto Cut Plaster And Lath
Harrier 9ft Crank & Tilt Patio Umbrella | Adjustable Backyard Outdoor Sun Shade Umbrella – 4 Colors | Solar LED Light & Standard Options LED Umbrella + 23L Plastic Base Grey
- Find ferrous and non-ferrous metal up to 6 in. (152 mm) deep in concrete and other non-metallic surfaces.
- Automatically differentiates between magnetic metal (such as rebar) and non-magnetic metal (such as copper pipe).
- Shows the depth of metal from the surface in both inches and centimeters.
- Helps map out the grid of metal through any nonmetallic construction material, including concrete, tile, and marble.
- Ideal for finding and/or avoiding rebar, cables, pipe, nails in reclaimed wood, nails/tacks in studs behind lath & plaster walls, electrical boxes and....
Zircon MultiScanner 740 Electronic Wall Scanner with Built-In Erasable Wall Marker
- Zircon’s MS 740 is a multi-surface scanner with 4 modes that allow you to detect and mark the location of studs, metal and live AC wiring.
- ACT (Auto Correcting Technology) that automatically corrects common user errors, such as when scanning begins over a stud, in addition to the unique floating head design that keeps the sensor flat on rough and textured surfaces to increase the accuracy of results.
- Both StudScan and DeepScan modes locate the edges, center and direction of wood or metal studs and joists.
- Metal Scan mode finds both non-ferrous metal (such as copper pipe) and ferrous metal (such as rebar) even through lath and plaster.
- AC Scan finds and traces live, unshielded electrical AC wires.
- WireWarning Detection indicates the presence of live, unshielded electrical AC wiring while scanning in StudScan, DeepScan, and Metal Scan modes.
- Integrated erasable wall marker enables users to mark targets with the simple push of a button.
Electric Medical Cast Cutter Orthopedic Plaster Saw Sport Medicine Red FORZA4 Original
- The basic surgical equipment can effectively cut all kinds of bandages.
- High-speed saw blade vibration systemwill not scratch the skin for the blade rolls from left to right with the amplitude of 5.6.
- Electric plaster saw cut the plaster by swaying the saw. During the operation, it won’t bring the scratch even the saw blade contact with patient’s skin..
- Motor adopt the dual-insulation protecting device and it has assured the safety of both operator and patients..
- Applications: 1.Oscillating Frequency Is Greater Than 12500 Times / Minute. Oscillating Angle 5 Degrees. 2.Low Noise Optimization Design Of Mechanical Structure And Components. 3.Alloys Saw Long-Time Use. 4.Soft Tissue Protection Function, Safe And Reliable Use. 5.Suitable For All Types Of Plaster Bandage. Especially Suitable For All Types High Polymer Bandage. 6.Our plaster saw was used in demolishing the plaster bandages, orthopedic fixation and resetting..
American Orthopaedic Cast Cutter, Replacement Blades Titanium Nitride Coated 2.5” (6.1cm)
- SCOPE OF APPLICATION--This electic plaster saw is used for the removal of plaster bandage after fixed reduction, suitable for all types of plaster bandage, especially suitable for all types high polymer bandage..
- OPERATORS SAFETY--Electric motor adopts double insulated protection device to ensure safety for the operators..
- PATIENT SAFETY--The plaster saw uses micro motor with low noise, small vibration and speed adjust from large to small, in the actual test 1-5 gear, gently across the skin will not be injured..
- OPERATION OF PLASTER REMOVAL--Set the machine to gear 5 or 6 and cut the surface of the plaster. The closer it is to the skin, the slower it should be, turn to low gear..
- REPLACe BLADE--The blades of plaster saw are consumable, you can buy replacement blades from our shop..
2 Pack Plaster Cloth Gauze, Gauze Bandages Wrap Strips for Art Project, Belly Cast, Scenery Molds, Body Casts and Sculptures - 4' W x 120' L
- Plaster Cloth Strips Material:plaster bandages made from 100% knit cotton cloth with plaster..
- Plaster Cloth Roll Size:plaster cloth size 4" W x 120" L, easily cut with scissors to get desired size..
- Plaster Strips Packaging Quantity:You will receive 2 pack plaster cloth, Each roll is individually wrapped waterproof and keep it dry..
- Multipurpose Plaster Sheets:wet with water and apply,Dried quickly easy to use, nice and sturdy.Ideal for art project, mask making, hobby craft, sculptures, belly molds, etc..
- Risk Free Purchase: Your satisfaction is our goal, if did not meet your needs, please contact ourand we will be more than happy to make it right for you..
BAOSHISHAN Electric Cast Cutter Plaster Saw Cast Saw for Plaster Bandage with 3 Saw Blades 110V Red
- SCOPE OF APPLICATION--This electic plaster saw is used for the removal of plaster bandage after fixed reduction, suitable for all types of plaster bandage, especially suitable for all types high polymer bandage..
- OPERATORS SAFETY--Electric motor adopts double insulated protection device to ensure safety for the operators..
- PATIENT SAFETY--The plaster saw uses micro motor with low noise, small vibration and speed adjust from large to small, in the actual test 1-5 gear, gently across the skin will not be injured..
- OPERATION OF PLASTER REMOVAL--Set the machine to gear 5 or 6 and cut the surface of the plaster. The closer it is to the skin, the slower it should be, turn to low gear..
- REPLACe BLADE--The blades of plaster saw are consumable, you can buy replacement blades from our shop..
BAOSHISHAN Cast Removal Saw Cast Cutter Electric Plaster Saw Oscillating Speed Adjustable for Tearing Polymeric Materials 110V BLUE
- SCOPE OF APPLICATION--This electic plaster saw is used for the removal of plaster bandage after fixed reduction, suitable for all types of plaster bandage, especially suitable for all types high polymer bandage..
- OPERATORS SAFETY--Electric motor adopts double insulated protection device to ensure safety for the operators..
- PATIENT SAFETY--The plaster saw uses micro motor with low noise, small vibration and speed adjust from large to small, in the actual test 1-5 gear, gently across the skin will not be injured..
- OPERATION OF PLASTER REMOVAL--Set the machine to gear 5 or 6 and cut the surface of the plaster. The closer it is to the skin, the slower it should be, turn to low gear..
- REPLACe BLADE--The blades of plaster saw are consumable, you can buy replacement blades from our shop..
Medical Electric Plaster Saw Cast Cutter Orthopedic Sports Medicine 110V 12500r/min FDA Approval）
- ✄ SCOPRE OF APPLICATION -- This electic plaster saw is used for the removal of plaster bandage after fixed reduction, suitable for all types of plaster bandage. Also Turn to 6 gear can be used to cut fiberglass( but not recommended to cut glass fiber, the motor may have issues in the long run due to dust).
- ✄ PRODUCTS CLASSIFICATION -- 1.Anti-shock type,degree and protection against harmful into the liquid level points:medical saw is II type.B is common tyoe. 2.Divided by the work of system: medical electric plaster saw is running short..
- ✄ SAFE & RELIANLE -- The electrically operated gypsum saws through the saw blade swinging sawing gypsum,in use,even if the saw blade will contact the patient skin not to create cuts.the electrical machinery uses the double insulation protective device,has guaranteed the safety of operators and patient..
- ✄ HIGH QUALITY -- This plaster saw has FDA approval, uses micro imported motor with low noise, small vibration, more powerful and reliable with faster speed, did not overheat. Alloy blade is suitable for long time use. It comes with a foam padded travel case, and it is sturdy and well made..
- ✄ SPEED ADJUSTABLE -- Speed adjust from large to small, in the actual test 1-5 gear, The closer it is to the skin, the....
Electric Plaster Saw Speed Adjustable Plaster Cast Cutter for Tearing Polymeric Materials Plaster (110V Green)
- Oscillating frequency is greater than 12500 times/min. Oscillating angle is 5 degrees..
- This product is used for the removal of plaster bandage after fixed reduction. Suitable for all types of plaster bandage, especially suitable for all types high polymer bandage..
- The plaster saw uses micro motor with low noise, small vibration and speed adjust from large to small, in the actual test 1-5 gear, gently across the skin will not be injured..
- Operation of plaster: Set the machine to gear 5 or 6 and cut the surface of the plaster. The closer it is to the skin, the slower it should be, turn to low gear..
USG#1 Potters Plaster (High Strength 20) Plaster for Scenery, Dioramas, Dentistry and Mold Casting Also Great for Model Railroads & Gaming … (25 Pounds)
- High Strength 20 Plaster for Scenery Dioramas and Casting.
- Quick setting, lightweight white plaster in water resistant bag. Ideal for patterns, figurines, commercial casts, and sculpture. Can be used for making outer or mother molds, and it is not recommended for outdoor use..
- Full strength limestone high density plaster, not cut with cheap plaster fillers.
- Designed for strength and casting detail. High Strength 20 is 20% to 30% harder than Plaster of Paris and works much better in mixing, pouring, and setting..
- Accepts liquid or crystal pigment colors and stains.