ReviewsTorin Socket Rail 2s

328.12031 Seal Replacement Kit Full Set 59PCs for Sears (Craftsman) 2-Ton Floor Jack Hydraulic Repair

  • Material: Made of high quality rubber, it is very sturdy.
  • Dimension: About 2.48" length by 1.97" height, and 1.73" width by 0.67" groove depth.
  • Durable and Safety: Sturdy rubber material and slotted construction, provides more cushion and crush resistance, It is very safe and convenient when you need to repair the vehicle.
  • Application: Fit for Torin Big Red T43002 , but not fit for Torin T42002. Jack pad to guard against slipping when you lift the vehicle, and prevent your frame rails and pinch welds from bending.at the same time protect your car undercarriage and surface painted.
Check Stock

2.4G Bluetooth Remote Control and JR1958RX-2S Receiver Kit Kids Powered Ride On Car ,Controller Control Box Accessories for Children Electric Ride On Car Replacement Parts

  • Model Number :JR1958RX-2S 7P socket 12V Control Box ,2.4G Bluetooth Remote Control White ,JR1958RX-2S 7P and JR1758RX-2S 7P sockets are the same and compatible，.
  • 2.4G Bluetooth Remote Control and JR1958RX-2S Control Box Kit，Products have slow start function, no additional installation of slow starter..
  • Product is Applied to Specific Children Riding Toys, Please Make Sure the Purchased Part Has Same Appearance as the Original One.
  • Please Open your broken electric ride on car and check the control box.Check that the appearance and model of the control box must be the same, this part should fit your car..
  • Please re-match the frequency according to the instructions before use. The power switch of the vehicle must be turned off first. Then press and hold the two buttons “`▲” and “¦” for 3 seconds to start matching the code, the first LED flashes, now turn on the power switch of the vehicle. The red indicator light stops flashing and succeeds.(Batteries are not included inside）.
Check Stock

Siemens 3UG4631-1AW30 Monitoring Relay, Single Phase Voltage Monitoring, Screw Terminal, 1 CO Contacts, 0.1-60VAC/DC Measuring Range, 0.1-30V Hysteresis, 0-20s Delay Time, 24-240VAC/DC Auxiliary Voltage

  • 3 INDICATORS-The protector base adopts 35mm rail type or device type, and has two screw hole structures inside, which can be directly installed separately or HT35 rail. Indicated by three indicators: normal, phase loss(voltage three-phase unbalance), reverse phase.
  • PHASE LOSS PROTECTION-Phase loss protection means that when the protected line is in the running state or non-operating state, any phase failure occurs, and the delay is 2S.
  • REVERSE PHASE PROTECTION-Reverse phase protection, a protection measure to prevent L1, L2, L3 three-phase AC phase sequence from being connected incorrectly, delay 2S action.
  • VOLTAGE IMBALANCE PROTECTION-Voltage imbalance protection, which refers to a protective measure that will affect the safe operation of the line due to three-phase voltage imbalance.
  • IDEAL FOR-Widely used in air compressors, electric motors, distribution boxes, water pumps, oil pumps, central air conditioning units, etc.
Check Stock

TEKTON 3/8 Inch Drive Deep 12-Point Socket Set, 19-Piece (6-24 mm) | SHD91116

  • Includes 19-pc. 3/8 in. drive deep 12-point sockets: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24 mm.
  • 12-point opening fits double hex (12-sided), hex, and square-shaped fasteners.
  • Socket geometry is designed to apply force to flat sides of fasteners and not the corners, preventing round-off.
  • Deep-length sockets reach into wells and accommodate the excess threads of longer shafts.
  • Extra-large die-stamped size markings are easy to read and can’t wear off.
  • Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion.
  • Four detent grooves provide a secure connection with the drive tool.
  • Beveled inner rim of the socket opening helps guide it smoothly onto fasteners.
  • Twist-to-Lock Socket Rail organizes and securely holds sockets in place, both for in your toolbox and on the go.
Check Stock

ALOANES 9PC ABS Socket Organizer, 1/2 inch, 3/8 inch and 1/4 inch Drive Socket Rail Holders, Heavy Duty Socket Racks, Black Rails with Red Blue Black Clips

  • Heavy Duty ABS Plastic: Made with high-strength, anti-fatigue PP rails and impact-resistant ABS spring clips with anti-abrasion steel ball bearings. The ALOANES socket rail organizer set can hold and secure your sockets under heavy conditions and can withstand multiple, long-term socket insertions and removals..
  • High Capacity: Holds up to 129 sockets in 3 color. This organizer for sockets is equipped with 36 1/2"inch dr clips ,45 3/8"inch dr clips and 48 1/4"inch dr clips..
  • Removable End Cap Design: Clips can be easily added or removed to meet your DIY needs for multiple sizes on a single rail. Also makes it easier for you to remove the clips to clean the socket rail organizer..
  • Work with almost all brands of sockets. Can be used for deep and shallow socket storage, for metric and SAE(inch) sockets storage..
  • Easy to store. 14 inches long. It can be easily hung on the wall, placed on your workbench, and placed in the tool drawer. You can even put it in your carry-on toolbox or tool bag..
Check Stock

TEKTON 3/8 Inch Drive Deep 12-Point Socket Set, 15-Piece (1/4-1 in.) | SHD91115

  • Includes 15-pc. 3/8 in. drive deep 12-point sockets: 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1 in..
  • 12-point opening fits double hex (12-sided), hex, and square-shaped fasteners.
  • Socket geometry is designed to apply force to flat sides of fasteners and not the corners, preventing round-off.
  • Deep-length sockets reach into wells and accommodate the excess threads of longer shafts.
  • Extra-large die-stamped size markings are easy to read and can’t wear off.
  • Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion.
  • Four detent grooves provide a secure connection with the drive tool.
  • Beveled inner rim of the socket opening helps guide it smoothly onto fasteners.
  • Twist-to-Lock Socket Rail organizes and securely holds sockets in place, both for in your toolbox and on the go.
Check Stock

uxcell AC 110V H3Y-2 Time Delay Relay Solid State Timer 0-60S DPDT w Socket

  • Package Content: 1 x Time Relay w Socket.
  • Timer Size: 57 x 27 x 21mm / 2.2" x 1" x 0.8" (L*W*H).
  • Socket Size: 75 x 22 x 30mm / 3" x 0.87" x 1.2" (L*W*H).
Check Stock

ARES 70345-3-Piece 1/2-Inch Drive Aluminum Socket Organizer Set - Store up to 10 Sockets on Each Rail and Keep Your Tool Box Organized

  • ITEM SPECIFICATIONS: These light, portable metal socket organizers are 9.84 inches long, made of machined aluminum and come in 3/8-inch and 1/2-inch drive. Each rail holds 10 metric or SAE sockets, and the socket clips have spring-loaded ball bearings to firmly hold sockets in place, even upside down. **Sockets are not included**.
  • VERSATILITY: Every ARES socket rail is fully customizable, with removable end caps to allow for easier clip changes, in addition to being wall-mount ready. Whether you plan on using an ARES socket organizer to assemble a socket set that will travel with you effortlessly or just want a way to keep your garage more organized, these socket organizers have you covered..
  • INTERCHANGEABLE: Our patented ball bearing socket clips glide over any of the aluminum rails, allowing you to mix and match your sets as you please. If you want to put a few 1/4-inch sockets on your 1/2-inch socket organizer, you can..
  • RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Socket Organizer, simply contact customer service for troubleshooting help, parts, replacement, or refund..
  • ASPCA BUSINESS AMBASSADOR: We are proud to be p....
Check Stock

uxcell AC 24V Coil Red Light DPDT 8 Pins Power Relay 5 Pcs + Socket Base

  • AC 240V 5ADC 28V 5A : AC 240V 5ADC 28V 5A.
  • Fixing Mount Hole Size : 5 x 4.5mm/0.2" x 0.18"(L*W).
  • Relay Size (Approx.) : 4x 2.7x 2cm/1.6" x 1.1" x 0.8"(L*W*H).
  • Socket Size : 7.5 x 2.2x 3cm/3" x 0.87" x 1.2"(L*W*H).
  • Shell Material : Plastic, Electric Parts.
  • Package Content : 5 x PowerRelay5 x Socket.
Check Stock

ARES 70122-3/8-Inch Drive Blue 9.84-Inch Aluminum Socket Organizer - Store up to 10 Sockets and Keep Your Tool Box Organized - Sockets Will Not Fall Off this Rail

  • ITEM SPECIFICATIONS: These light, portable metal socket organizers are 9.84 inches long, made of machined aluminum and come in 3/8-inch and 1/2-inch drive. Each rail holds 10 metric or SAE sockets, and the socket clips have spring-loaded ball bearings to firmly hold sockets in place, even upside down. **Sockets are not included**.
  • VERSATILITY: Every ARES socket rail is fully customizable, with removable end caps to allow for easier clip changes, in addition to being wall-mount ready. Whether you plan on using an ARES socket organizer to assemble a socket set that will travel with you effortlessly or just want a way to keep your garage more organized, these socket organizers have you covered..
  • INTERCHANGEABLE: Our patented ball bearing socket clips glide over any of the aluminum rails, allowing you to mix and match your sets as you please. If you want to put a few 1/4-inch sockets on your 1/2-inch socket organizer, you can..
  • RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Socket Organizer, simply contact customer service for troubleshooting help, parts, replacement, or refund..
  • ASPCA BUSINESS AMBASSADOR: We are proud to be p....
Check Stock

Neworld Jack Pad Adapter for Jack Stand Almost Universal Rubber Slotted Frame Rail Pinch welds Protector (Jack Stand Pads 2pack)

  • Jack stand rubber pads:Jack adapter was made of heavy duty construction and durable rubber material, Only for 2-3 ton jack stand.
  • Durable Material:jack stand pads made of very sturdy rubber. It will prevent your frame rails and pinch welds from bending when using a Jack to lift your car, can also protect painted or coated suspensions components.
  • Perfect Design :Jack pad adapter is designed to be sturdy enough to support your car while soft enough to resist pressure for your jack stand.
  • Maximum Load & Size:The jack pad adapter fits most jacks and vehicles and can work great with jack stand, specifically compatible with Torin Big Red T43002. But NOT fit for Torin T42002.
  • jack stand pads :with high quality we are sure that you will like jack pads. Just contact us if unsatisfied, we will be happy to help you and 100% replacement or full refund.
Check Stock