ReviewsTorque Arms

Robotwist Deluxe 7321 Automatic Jar Opener As Seen, Higher Torque for Improved Jar Opening Performance On TV

  • HIGHER TORQUE The Robo Twist Deluxe 7321 is a newer version of Robo Twist Jar Opener that has an improved torque power which can easily open the tightest and toughest lids of any jars..
  • AUTOMATIC SYSTEM It can open jar lids automatically without any unnecessary effort. To use it, you need only set it down over the jar, press the button, and watch the vice grips hold the unit in place and twist off the jar lid..
  • FITS ANY JAR This robotic jar opener is constructed with 2 large twisting vice grips that can hold 1.2 to 3.5 inches diameter of lids, making it compatible to different sizes and types of jars and jar lids..
  • PERFECT FOR EVERYONE The design of this jar opener focuses on making life easier for people with limited grip strength such as kids, elderly and people with arthritis..
  • EASY STORAGE For compact storage, press the button to “open” a jar on the unit. This will reset the arms to their innermost position. Doing so makes the small unit even smaller..
Check Stock

Crows Feet

  • ... – Sizes Included (Metric/Millimeter): 10 11 13 14 15 17 19 21 22 24 mm – Full Length: 11” – Weight: 1.56 lbs. – Includes a Complete 10-Clip Wrench Organizer, for Better Storage Efficiency..
  • ✓ QUALITY: Made in Taiwan and Manufactured with Drop Forged, Heat-Treated Steel will withstand up to 150 ft-lb. of torque for a long lasting life – High Quality Chrome Mirrored Finish – Heavy-Duty Construction Burr-Free for a perfect fit on the fasteners yet slim enough for the tightest areas..
  • ✓ DESIGN: Chrome Plated Wrenches for Durability Improvement and Corrosion Resistance – Round Head Design Eliminates any stripping or splitting of the wrench and ensures a snug fit on the fastener – Sizes are carved onto each wrench for easy identification – Storage Organizer included, designed specially to hold the wrench’s in place when storing or using on jobs..
  • ✓ USES: Crow’s Feet Wrench Adapters Speed up Installations & Removals, Fitting Perfectly on any 3-8” Drive Ratchet, Extension Rod or Torque Wrench, Reaching inaccessible fasteners that sockets can’t get to – Great for Lawn Equipment, Car Automotive & Truck Work in tight Engine/Radiator Areas & Control Arms, or for underneath sink/toilet work like faucet spray hoses..
Check Stock

RCmall DS3218MG 20KG Waterproof Digital Servo with 25T Servo Arm, High Torque Full Metal Gear RC Servo for RC DIY 1:8 1: 10 1:12 Scale RC Crawler Truck Boat Control Angel 270° (Pack of 2)

  • 1. High Rotation - well-controlled, 270 degree rotation, 360 degree rotation when power-off..
  • 2. Perfectly to be used for 1/8, 1/10, 1/12 Scale Crawler Truck, RC Car,robot,Boat,mechanical arms, climbing cars and remote control models..
  • 3.Large Torque - maximum torque is up to 21.5 kg/cm (298.5 oz/in)@6.8V ..
  • 4. High Quality - equipped with strong copper & aluminum gears,CNC aluminium middle Shell. They are stable,low noise and water-proof..
  • 5.Package Included : 2 x DS3218 Waterproof Digital Servo , 2 X 25T Servo Arm， 2X Accessories.
Check Stock

Hamilton Uni-Stand Guitar Amp Stand

  • A double clutch disk that allows you to remove and rotate the support arm assembly offers strength and versatility.
  • The solid steel double stamped 3" disk allows for a secure locking position every time.
  • The A-Frame base with 1" square tubing construction will adjust its floor spread in order to get the most support under your amp.
  • A 17" base spread and non-slip rubber end caps acting as shock absorbers ensure maximum support.
  • The 11" support arms feature cushions to protect and grip your gear.
  • 2" knobs allow for maximum grip and torque when adjusting your stand.
Check Stock

DWEII MG995 Servo Motor Control 180 Angle Metal Gear Servo 20KG Digital High Speed Torque Servo Motor for Smart Car Robot Boat RC Helicopter Pack of 3

  • Stall torque: 12kg/cm(6V), 13kg/cm(7.2V). Recommended voltage: 5V, current usage: 3A.
  • Application: Analog Servo Motor Great for RC Helicopters, Micro Robots,Robotic Arms and RC Rock Crawler, RC Boat Motor,Truck, Boat, Racing Car,Various Remote Control Toys.
  • Dimension:40.7*19.7*42.9mm(1.6*0.78*1.69in).
  • This high-speed standard servo motor can rotate 180 degrees (90 in each direction)..
  • Good performance digital standard servo, which can be a common use for robots, mechanical arms, climbing cars and remote control toys..
  • Compatible with most standard receiver connector.
Check Stock

Kyosho 1/8 Inferno MP9e Evo V2 4WD 4S Brushless Buggy RTR, KYO34111

  • Rib reinforced long front suspension arms from the Inferno TKI4 realize superior steering response..
  • In addition to lower center of gravity from the lower position of the battery, the belt fastening.
  • Fully assembled chassis with completed body in a Readyset includes everything except battery for the.
  • Equipped with KYOSHO SPEED HOUSE brushless motor and ESC for dynamic power and performance..
  • High torque KS5031-09MW waterproof steering servo included..
Check Stock

Gator Frameworks Elite Series Large Wooden Combo Guitar Amp Stand in Natural Maple Finish (GFW-ELITEGTRAMPLG-MPL)

  • Double clutch disk allows you to remove and rotate the support arm assembly.
  • 2" Knobs allow for maximum grip and torque when adjusting your stand.
  • 11" Support arms w/ cushions to protect and grip your gear.
  • 17" Base spread, 1" Square tubing and non-slip rubber end caps ensure maximum support.
  • Industry's most innovative stands and accessories.
Check Stock

Teyleten Robot SG90 9G Mini Micro Servo Motor for RC Robot RC Mini Servo Helicopter Airplane Boat Controls 5pcs

  • No-load running speed: 0.09±0.01 seconds/60° at 4.8V rotation angle: 120° stall torque (4.8V): 17.5oz /in (1kg/cm). Amplifier type: analog....
  • Application areas: robotic arms, micro robots, dinghies, remote control helicopters, various R/C toy Arduino modules and experiments.
  • Interface type: compatible with JR and Futaba interfaces..
Check Stock

Vita-K Professional for Crow’s Feet Eyecreams, 0.5 Ounce by Vita-K

  • ... – Sizes Included (Metric/Millimeter): 10 11 13 14 15 17 19 21 22 24 mm – Full Length: 11” – Weight: 1.56 lbs. – Includes a Complete 10-Clip Wrench Organizer, for Better Storage Efficiency..
  • ✓ QUALITY: Made in Taiwan and Manufactured with Drop Forged, Heat-Treated Steel will withstand up to 150 ft-lb. of torque for a long lasting life – High Quality Chrome Mirrored Finish – Heavy-Duty Construction Burr-Free for a perfect fit on the fasteners yet slim enough for the tightest areas..
  • ✓ DESIGN: Chrome Plated Wrenches for Durability Improvement and Corrosion Resistance – Round Head Design Eliminates any stripping or splitting of the wrench and ensures a snug fit on the fastener – Sizes are carved onto each wrench for easy identification – Storage Organizer included, designed specially to hold the wrench’s in place when storing or using on jobs..
  • ✓ USES: Crow’s Feet Wrench Adapters Speed up Installations & Removals, Fitting Perfectly on any 3-8” Drive Ratchet, Extension Rod or Torque Wrench, Reaching inaccessible fasteners that sockets can’t get to – Great for Lawn Equipment, Car Automotive & Truck Work in tight Engine/Radiator Areas & Control Arms, or for underneath sink/toilet work like faucet spray hoses..
Check Stock

Standford 6L Antique Brass Chandelier with Down Light and Switch

  • ... light fixture also works on sloped, slanted or vaulted ceiling.
  • [Durable and ETL Listed] ETL listed for dry locations. Made of premium metal & certified copper cord, this drum chandelier has successfully passed multiple inspection tests including 72hrs lighting test, 1.2 meters shatter-resistant of package and arms torque test. Every chandelier is required to pass full inspection to ensure best quality for our customers and ultimate trust for our company.
  • [Warm Notice] This chandelier requires 4 x E12 base max 40W bulbs (Not Included) and should be used in 120V. It works with vintage filament, incandescent, LED, CFL bulbs and compatible dimmer switch (Not Included). 2 year warranty and 24-hour quickly customer support. Any concerns please feel free to contact us.
Check Stock

PINGPING Channel 2 rc Radio 2CH RC Micro Mini Aircraft  Control Remote Helicopter Helicopter The Mad Womens Ball Red One Size

  • 100% new brand, high-quality SG90 servo motor, compatible with remote control helicopters, micro robots, robotic arms and ships. Support various....
  • None Load operating speed：0.12 seconds/60 degrees (4.8V).
  • Using temperature: -30~+60 degrees Celsius.
  • Dead zone setting: 4 microseconds Working voltage: 3.5V~6V.
Check Stock