ReviewsTorque Measurement Couplings

TAGVIT Digital Torque Wrench (12.54-250.8 ft-lbs./17-340Nm), 1/2 Inch Drive Electronic Torque Wrench with Angle, ±2% CW Torque Accuracy with Buzzer and LED Flash Notification for Bike Motorcycle Car

  • Four Torque Measurement Units: This digital torque wrench can measure from 12.54-250.8 ft-lbs./17-340Nm, with easy to read LED display, available in Nm, Ft-lb, In.lb, Kgf.cm four measurement value switching, can adapt to the application of different torque unit measurement. The angle digital torque wrench has an accuracy of ±2% clockwise and ±3% counterclockwise. Comes with a calibration certificate and conforms to ISO 6789 and ASME B107.14M standards..
  • Buzzer & LED Indicator: When the set torque is reached, the 1/2 inch torque wrench will emit a flashing light, and the buzzer will sound to remind you to stop applying force to avoid damage caused by excessive torque. The angle torque wrench provides 10 preset values, which can save the commonly used torque values and angle values, and can set the upper and lower limits of the torque value and angle value alarm, which is convenient and fast for daily use..
  • Four Measurement Modes: The 1/2 inch drive digital torque wrench has TRACK real-time mode and PEAK mode, torque mode (A1) and angle mode (A2). By quickly switching the four modes of A1&TRACK, A1&PEAK, A2&TRACK, and A2&PEAK, it can meet your different needs and usage habits..
  • Two Way Use: By adjusting the direction button on the head of the electronic....
Check Stock

uxcell 2pcs Shaft Coupling 6.35mm to 6.35mm Bore L25xD20 Flexible Coupler Joint for Servo Stepped Motor

  • General purpose power transmission coupling, also used in motion control applications and rotational power transmissions, is good replacement for your needs..
  • It is designed to transmit torque while damping system vibrations and accommodating misalignment to protect other components from damage..
  • Jaw couplings have three parts: two metallic hubs and an elastomer insert called an element, but commonly called ""..
  • Shaft Usage: 6.35mm to 6.35mm/0.25 inch to 0.25 inchTotal Size: 25 x 20mm / 0.98 inch x 0.79 inch (L*D).
  • Wear resistant ,high hardness and excellent response.Super elastic torque can absorb vibration, appropriate a large torque transmission..
Check Stock

8 Pack 7mm Flexible Coupling Connector for Any Motors with Shaft Diameter of 0.275in/7mm - Car Wheels Tires Shaft

  • 【SIZE】--L25mm x D20mm/0.98inch x 0.79inch( L*D).
  • Diameter: 5mm to 8mm / 0.19inch to 0.31inch.Set screwsThread Size: M3.
  • 【MATERIAL】--The product is made of high-quality aluminum alloy with high hardness and blue polyurethane to make the overall effect more textured. Type: Plum shaped..
  • 【SPECIAL DESIGN】--Jaw couplings have three parts: two metallic hubs and an elastomer insert called an element, Wear resistant ,high hardness and excellent response..
  • 【QUALITY】--Super torque can absorb vibration, appropriate a large torque transmission.It is designed to transmit torque while damping system vibrations and accommodating misalignment to protect other components from damage..
  • 【APPLICATION】--The shaft couplers are widely applied to small CNC machines encoding and 3D printers Z shaft coupling, simplifies the debugging difficulty..
Check Stock

1 Piece Clamp 1/2\ x 5/8\ Bore Dia. Steel Rigid Shaft Coupling

  • Item - Rigid Shaft Couplings: Rigid Shaft Coupling, Clearance Dia. (In.): 1-9/16, Max. Torque (In.-Lbs.): 710.
Check Stock

Ruland OD21/33-AT Oldham Coupling Disk, Black Acetal, Bore, 1-5/16\ or 33.3mm OD

  • Ruland oldham couplings have a zero-backlash balanced design for reduced vibration at speeds up to 4,500 RPM. They can accommodate high amounts of parallel misalignment (up to 10% of the hub OD)..
  • Acts as a mechanical fuse stopping power transmission during a torque overload. User can combine clamp or set screw hub with inch, metric, keyed, or keyless bore for a high level of customization..
  • Made from acetal for higher torque and torsional stiffness capabilities than nylon..
  • Proprietary hub machining process for smooth interaction between the hub and disk allowing for significantly longer life..
  • Ruland oldham coupling disks are RoHS3 and REACH compliant.
Check Stock

Genius Tools 1\ Dr. Torque Wrench, 100~700 ft.lb. - 880700F

  • additional details: Replaces flexible element used in 4/5H70P/TL70P double flex couplings. Nexen offers a rebuilding service for most products.
  • contact Motion Industries for more details..
  • for use with series: TL70 Series Torque Limiters, 4HP70 Series Clutches, 5HP70 Series Clutches.
Check Stock

VANPO Adjustable Digital Torque Wrench (5-99.6 Ft-lb/6.8-135 N.m), 34mm Adjustable Jaw Open End Torque Wrench Accuracy CW ±2% CCW±3%, LCD Display Buzzer & LED Indicator for HVAC Torquing Down Nut

  • ... key until you hear a “beep”, then press the ▲ or ▼ key to set the torque value. The flashing number indicates the value you are currently setting. After the setting is completed, short press the U/S key to move the number, and short press the C key to save the setting. Operation is quick and easy..
  • 【Two Measurement Modes】The digital torque wrench has two modes: peak/track. The peak mode force release shows the maximum torque value, the data is automatically saved in the background program, and a total of 50 sets of data can be saved. Track mode can display real-time torque values. You can configure the measurement mode as required. Buzzer and LED notification when target torque is reached..
  • 【Torque Range 5-99.6 Ft-lb/6.8-135 N.m】 The torque value range of digital open end torque wrench is ( 5-99.6 Ft-lb/6.8-135 N.m). In kgf.cm / Nm /lbf.ft /lbf.in, the clockwise direction accuracy is ±2%, and the counterclockwise direction accuracy is ±3%. Reliable and accurate measurement data increases your productivity..
  • 【LCD Display】The adjustable torque wrench adopts double-layer screen protection to be more resistant to falling, and the large color LCD display allows you to view the data more clearly and reduce errors. The highly backlit scr....
Check Stock

Leolee Adjustable Digital Torque Wrench (2.2- 44.3 Ft-lb/3-60N-m), 34mm Adjustable Jaw Open End Torque Wrench Accuracy CW ±2% CCW±3%, LCD Display Buzzer & LED Indicator for HVAC Torquing Down Nut

  • ... key until you hear a “beep”, then press the ▲ or ▼ key to set the torque value. The flashing number indicates the value you are currently setting. After the setting is completed, short press the U/S key to move the number, and short press the C key to save the setting. Operation is quick and easy..
  • 【Two Measurement Modes】The digital torque wrench has two modes: Peak Mode/Track Mode. The peak mode force release shows the maximum torque value, the data is automatically saved in the background program, and a total of 50 sets of data can be saved. Track mode can display real-time torque values. You can configure the measurement mode as required. Buzzer and LED notification when target torque is reached..
  • 【Torque Range 2.2-44.3 Ft-lb/3-60 N.m】 The torque value range of digital open end torque wrench is ( 2.2-44.3 Ft-lb/3-60 N.m). In kgf.cm / Nm /lbf.ft /lbf.in, the clockwise direction accuracy is ±2%, and the counterclockwise direction accuracy is ±3%. Reliable and accurate measurement data increases your productivity..
  • 【LCD Display】The adjustable torque wrench adopts double-layer screen protection to be more resistant to falling, and the large color LCD display allows you to view the data more clearly and reduce errors. The highly bac....
Check Stock

VANPO Digital Torque Wrench 3/8 Inch drive(5-99.5 ft-lbs./6.8-135Nm), ±2% Torque Accuracy, Electronic Torque Wrench with Preset Value, Buzzer and LED Indicator, Small Torque Wrench Set for Bike Moto

  • 【Memory Mode】 This digital torque wrench provides Track and Peak modes. In Track mode, a balanced force can be applied by changing the value of the display. Added 500 sets of data storage function, the torque value generated will be recorded in Peak mode, which is convenient for you to check at any time..
  • 【Measurement Mode】The electric torque wrench has four measurement modes: kg-cm, Nm, in-lb, ft-lb. Only need simple operation, you can clearly see the numerical conversion between the measurement units through the display screen. It will meet the switching use between the measurement units according to different situations..
  • 【Reminder Mode】 When using the 3/8 drive torque wrench to reach the preset torque value, a rapid buzzer will sound, and the LED light will change from a flashing green light to a solid red light. The reminder can effectively avoid screw damage caused by excessive force..
  • 【Quick release and high precision】This small torque wrench can easily and effortlessly replace accessories through the quick release design. And it has dual direction ratchet head function, and the clockwise accuracy can reach ±2%, which is more accurate and reliable than the value measured by a mechanical wrench..
Check Stock

2PCS 5mm to 8mm Aluminium Plum Flexible Shaft Coupling D20 L25 Connector Flexible Coupler for 3D Printer/DIY Encoder and Servo Stepped Motor

  • SIZE] L25mm x D20mm/0.98inch x 0.79inch( LD).
  • Diameter: 10mm to 10mm / 0.39inch to 0.39inch.Set screwsThread Size: M3.
  • [MATERIAL] The product is made of high-quality aluminum alloy with high hardness and blue polyurethane to make the overall effect more textured. Type: Plum shaped..
  • [SPECIAL DESIGN] Jaw couplings have three parts: two metallic hubs and an elastomer insert called an element, Wear resistant ,high hardness and excellent response..
  • [QUALITY] Super torque can absorb vibration, appropriate a large torque transmission.It is designed to transmit torque while damping system vibrations and accommodating misalignment to protect other components from damage..
  • [APPLICATION] The shaft couplers are widely applied to small CNC machines encoding and 3D printers Z shaft coupling, simplifies the debugging difficulty..
Check Stock

TorcUP Raptor RP-2000 Pneumatic Torque Wrench with RP-FRL (Filter Regulator Lubricator) Included.

  • additional details: Replaces flexible element used in 4/5H80P/TL80P double flex couplings. Nexen offers a rebuilding service for most products.
  • contact Motion Industries for more details..
  • for use with series: 5HP80 Series Clutches, TL80 Series Torque Limiters.
Check Stock