ReviewsTorque Servo Motor

Hosyond 10 Pack Servo Motors SG90 9G Micro Servo for RC Robot Helicopter Airplane Boat Remote Control Toys, Servo for Arduino Project, Blue

  • [Applications] SG90 9G servo motor, compatible with RC helicopters, micro robots, robot arm and ships etc. Support various remote control toys and Arduino project.
  • [Interface type] This SG90 servo is compatible with JR & Futaba interface.
  • [Operating speed] 0.12 second/ 60degree ( 4.8V no load), 0.1 second / 60degree ( 6.0V no load), Max rotation angle:180 degrees.
  • [Reminder] The starting current of the analog servo motor must be greater than 1A. SG90 Servo is an analog servo and needs to continuously provide PMW signal to work normally.
Check Stock

2.4KG Micro Digital Servo Kit - High Torque 9g Metal Servo Waterproof Mini Steering Gear Standard Fast Speed Continuous Rotation for SCX24 RC Model & EMAX ES08MD II Standard 180 Degree

  • 2 Pack servo set : The EMAX ES08MD II digital servo's torque: 1.6kg/cm(4.8V ), 2.0kg/cm(6V), positioning speed(at no load): 0.12s / 60 degrees(4.8V), 0.1s/60 degrees(6.0V), maximum rotating angle: 180°.It can instantly generate high torque to make your RC car overtake in curve.
  • Wide application: Equipped with JR & Futaba universal plug, the 3 wire metal servo can be well adapted to Axial SCX24 SCX10 RC cars helicopters KT, fluttering, gliding, small robots, arduino experiments and other models.
  • Strong full metal gear: Waterproof servo motor is made of sturdy PVB plastic shell, strong steel metal gear and hard iron shaft.This powerful steering gear has passed the CE international safety test,which can withstand more than 1,000 impacts and increase your model's service life.
  • Stable performance: Compared with other steering gears, our upgraded high torque servo are equipped with high precision potentiometers and high-resolution digital chip, which can make your RC car respond quickly, enhance anti-interference ability, and quickly dissipate heat.
Check Stock

Yahboom Digital Servo Full Metal Gear High Torque Servo Motor for RC Model DIY Waterproof Control Angle 180° DS3218MG 20kg servo

  • Super Large Torque - Maximum torque of servo is 6.0V up to 24 kg f / cm,Very strong, excellent range of motion, and includes a metal horn..
  • Excellent Quality - DS3218MG Servo Motor not only has gears undergoing hard oxidation treatment, but also has an aluminum alloy case with good heat....
  • High Precision - Metal servo using dual ball bearings design and advanced potentiometer to make sure the high linearity and accuracy of the servo.
  • Standard Size Wide Range of Applications - 1.58x0.79x1.60inch (40x20x40.5mm), Weight: 2.4oz(68.2g)Perfect for most RC cars, robot joints, 1 / 8 RC....
  • Professional After-sales Guidance - Yahboom provides excellent after-sales service. If you have any product problems, you can contact Yahboom for help.
Check Stock

AEDIKO MG996R Servo Motor Control 180 Angle Metal Gear Servo Digital High Speed Torque Servo Motor for Smart Car Robot Boat RC Helicopter 2-Pack (MG996)

  • Positioning Speed Without Load: 0.17s / 60 degrees 4.8V.
  • Compliant with Futaba, Hitec, Sanwa, GWS, etc ..
  • Latest Version: MG996R Servo Motor Which Updated from SG90 and MG90S Micro Servo Motor,Made of High Precision Potentiometer and High Resolution Digital Chip to Ensure Stable Performance and Solve Problems:Unsuitable R / C and Slow Response Time.
  • Gear Type: All Metal Gear RC Servo Can Control the Angle Range from 0 to 180, with Precise Control and Gears are Consistent,Which Can Rotate 360 Degrees When Power Off.
  • Application: Analog Servo Motor Great for RC Helicopters, Micro Robots,Robotic Arms and RC Rock Crawler, RC Boat Motor,Truck, Boat, Racing Car,Various Remote Control Toys and Arduino Experiments.
Check Stock

KST DS215MG Micro Digital Servo

  • 100% NEW brand,high quality. Stall Torque (4.8V): 17.5oz /in (1kg/cm).
  • It is tiny and lightweight with high output power..
  • Compatible with the project like Robot Arm/ Robot hand/ control the servo with potentiometer/ multi servo control..
  • The SG90 has 3 wire interfaces in which the connections should be made as follows: Red wire-5V, Brown Wire-Ground, Yellow wire-digital pin 9..
  • SG90 9G micro servo motor for remote control helicopters, micro robot, robot arm and boats..
Check Stock

diymore 6Sets MG996R 55g Digital Metal Gear Servo Motor + MG995 MG996R Metal Servo Arm 25T Disc Metal Horns for Robot Arm RC Helicopter Airplane Car Boat Robot

  • 【Package】Package included 6 sets MG996R metal gear servo motor+25T Disc metal horns..
  • 【Updated version】MG996R Micro Servo motor, which updated from SG90 Micro Servo and MG90S micro servo motor. The speed of MG996r is faster, the accuracy is much improved and the tension is increased..
  • 【Quality】180°rotation high torque,Stable and shock proof and also of high speed.Can compatible with most standard receiver connector: Futaba, Hitec, Sanwa, GWS, etc..
  • 【Parameter】Torsional moment: 12kg/cm(6V), 13kg.cm.at(7.2V).
  • Operating Speed : 0.17sec / 60 degrees (4.8V no load).
  • Operating Speed : 0.13sec / 60 degrees (6.0V no load)..
  • 【Application】Biped robot/manipulator/remote control car, suitable for 50-90 grade methanol fixed-wing~aircraft and 26cc-50cc gasoline fixed-wing aircraft and other models..
Check Stock

2 Pieces MG90S 9g Micro Servo RC Servos for Planes MG90S Digital Servo Aluminum Alloy SG90 Micro Servos Metal Gear for Smart Robot Car Helicopter Plane Boat Vehicle Models

  • Package includes: the package 2 pieces of mini servo metal gears with model MG90S, which can replace SG90 for better noise suppression and durability.
  • Detailed size: the servo motor 9g has a size of 22.8 x 12.2 x 28.5 mm/ 0.9 x 0.5 x 1.1 inch, a weight of 13.6g, an operating torque of 2.0KG/ cm, a....
  • Wiring: dark gray: GND, red: VCC 4.8-7.2V, orange: pulse input, interface type: JR/FUTABA general.
  • You can give this digital servo motor to your....
  • Robust structure: the metal micro servo is composed of aluminum metal teeth, coreless motors, and double ball bearings, which is strong, reliable and....
  • Wide application: the metal gear servo micro can be compatible with 450 E-sky, swashplate steering gear, fixed wing, helicopter KT, flapping wing,....
Check Stock

BETU 2Set 25KG (7.4V/2S) High Torque RC Digital Servo,Waterproof Full Metal Gear Servo with 25T Servo Horn(180°)

  • 【Super Large Torque 25kg Servo】Super Large Torque, Maximum torque is up to 25 kg/cm (280.5 oz/in)@7.4V(2s). Very strong, excellent range of motion, and includes a 25T metal horn..
  • 【Excellent Quality steering servo】Equipped with strong copper & aluminum gears,CNC aluminium middle Shell, Less Noise, light weight, Stable and water-proof,Equipped with 1 Pcs 25T Metal Servo Arms.
  • 【Widely Use Digital Servo】The servo (Control Angle 180°) Compatible with 1/8, 1/10, 1/12 Truck, RC Car / Robot / Boat and other remote control models..
  • 【High Torque Waterproof Servo】Waterproof performance: IP66. Controllable angle range from 0 to 180 degrees, Excellent linearity, precision control..
  • 【Metal Servo Servo Standard Size】1.57 x 0.78 x 1.59 inch(40 x 20 x 40.5 mm).
Check Stock

Alvarez AF30CE Artist Series Guitar

  • High-torque digital servo with spring-style servo saver.
  • Water-resistant high-power Reedy Brushless speed control with T-plug.
Check Stock

SunFounder 20KG Servo Motor Waterproof High Torque Servo, SF3218MG Metal Gear Digital Servo, Aluminium Case, Control Angle 270° for RC Robot Cars

  • Large Torque - 20KG Servo Motor 20.5kg·cm (284.7oz·in) -22.8kg·cm (316.63oz·in).
  • High Rotation Support Waterproof- 270 degree rotation. Well controlled from 0 to 270 degrees, and support waterproof..
  • High Precision - Using dual ball bearings design and advanced potentiometer to make sure the high linearity and accuracy of the servo.
  • Good Heat Dissipation - Make of CNC aluminium alloy case in order to cool the servo motor when it is working.
  • Dimensions - 1.58*0.79*1.60 ininch (40.0*20.5*40.5mm).
Check Stock

35KG Digital Servo Full Metal Gear High Torque Waterproof DS3235 with Two 25T Servo Arms for RC Car Robot Control Angle 180

  • UPGRADED NEW VERSION: DS3235 35KG High-precision, Coreless Stainless Steel Gear, Fully Waterproof, Digital Servo. Included two 25T double-locking metal servo horns.
  • LARGE TORQUE: maximum torque is up to 35 kg/cm (275 oz/in)@6.8V, made of strong copper & aluminum gears.
  • HIGH PERFORMANCE: Equipped with high precision potentiometers and high-resolution digital chip, fast response, strong anti-interference ability, low noise, fast heat dissipation..
  • HIGH ROTATION: well-controlled, 180 degree rotation. 360 degree rotation when power-off, perfect for robot joint activities.
  • HIGH QUALITY: Waterproof rubber seals screws, made of first-grade material ensure the longevity of the products. CNC aluminium middle shell enhances heat dissipation and ensures the servo motor can work well..
Check Stock