ReviewsTorque Wrench For Engine Building

NEIKO 03714A 1/4' Drive Adjustable Click Torque Wrench | SAE | 20-200 Inch-Pound Chrome Vanadium Steel | 10.75' Length

  • [MATERIAL]: Heat-treated CR-V steel construction supplies extreme durability and shock resistance for assorted applications..
  • [ACCURACY]: Machined factory tested and calibrated to +/- 4 percent to assist in prevention of breaking or over tightening bolts..
  • [VERSATILITY]: Quarter in. Dr. torque wrench includes a wide range of torque settings to loosen and tighten bolts on cars, motorcycles and small engine repair..
  • [FEATURES]: 1/4” drive torque and ratchet includes hard-to-find lower torque settings. Metric (MM) conversions displayed on tool and case..
  • [CONVENIENCE]: This automotive tool comes with an ABS custom fitted storage case for safe and convenient storage while providing protection while not in use..
Check Stock

TAGVIT 15 PCS Open End Interchangeable Torque Wrench Set, 9mm x 12mm Interchangeable Head Torque Wrench for Bicycle, Air Conditioning Maintenance, etc.(4-22 ft.-lb/5.4-30 Nm)

  • 【± 3% High Precision】The accuracy of the 9mm x 12mm open end interchangeable torque wrench is ±3%, and the adjustable torque range is 4-22ft.-lb/5.4-30Nm. The interchangeable torque wrench adopts dual scale design to meet your different needs. The scale is clear and easy to read, not easy wear..
  • 【Two Ways To Use】The square interface of the open end interchangeable torque wrench measures 9mm x 12mm, and can be used with a 1/4" ratchet head and Interchangeable open end adapters. The two use methods can be freely selected according to your needs..
  • 【Reversible Ratchet Head】The 1/4 inch ratchet head included with the interchangeable torque wrench has a quick release button for quick installation and removal of the socket. By adjusting the paddle on the head of the ratchet head you can switch the direction of clockwise and counterclockwise use, which is convenient and quick..
  • 【Easy To Use】The interchangeable head torque wrench has a safety lock ring. After pulling down the lock ring, turn it to set the required torque. After the setting is completed, release the lock ring, and the lock ring will automatically rebound to lock the torque value. When the set torque value is reached, the torque wrench will send click and vibration to remind to s....
Check Stock

TAGVIT Digital Torque Wrench(7.38-147.5 ft-lbs./10-200 Nm), 1/2-Inch Drive Digital Torque Wrench Electronic Torque Wrench with Buzzer and LED Flash Notification for Bike Motorcycle Car Maintenance

  • High Precision: The torque range of the digital torque wrench is 7.38-147.5 ft-lbs./10-200Nm, with four different torque units: Nm, Ft-lb, in.lb, Kgf.cm, which can be quickly switched according to needs. Accuracy is ±2% clockwise and ±3% counterclockwise, in accordance with ISO 6789 and ASME B107.14M, with an official calibration certificate. Use a professionally manufactured 72-tooth ratchet head for greater precision in use and no slippage..
  • TRACK/PEAK Mode: The 1/2 inch drive digital torque wrench has two measurement modes, the TRACK mode can display the real-time torque value, and the PEAK mode can display the maximum torque value during use. The motorcycle torque wrench adopts a large LCD display, which is clear and easy to read. The highly backlit screen makes it easy to use even in dimly lit environments..
  • 10 Preset Modes: By adjusting the M0-M9 mode of the bicycle digital torque wrench , multiple sets of commonly used torque values and upper and lower limit alarm ranges of torque values can be preset (M0 Mode: preset torque value.
  • M1-M9 Mode: preset torque value Upper and lower limits). Ideal for beginners and professionals, it is widely used in bicycles, motorcycles, auto repair and industrial use, etc..
  • Quick Release Button: The quick releas....
Check Stock

Crows Foot Wrench Set (Metric) Easily Access Hard-To-Reach Areas, Ideal for Tight Spaces, Great for Automotive Repair Work – Includes Sizes: From 10MM to 24MM – 10-Piece Kit With Clip-on Organizer

  • ... – Sizes Included (Metric/Millimeter): 10 11 13 14 15 17 19 21 22 24 mm – Full Length: 11” – Weight: 1.56 lbs. – Includes a Complete 10-Clip Wrench Organizer, for Better Storage Efficiency..
  • ✓ QUALITY: Made in Taiwan and Manufactured with Drop Forged, Heat-Treated Steel will withstand up to 150 ft-lb. of torque for a long lasting life – High Quality Chrome Mirrored Finish – Heavy-Duty Construction Burr-Free for a perfect fit on the fasteners yet slim enough for the tightest areas..
  • ✓ DESIGN: Chrome Plated Wrenches for Durability Improvement and Corrosion Resistance – Round Head Design Eliminates any stripping or splitting of the wrench and ensures a snug fit on the fastener – Sizes are carved onto each wrench for easy identification – Storage Organizer included, designed specially to hold the wrench’s in place when storing or using on jobs..
  • ✓ USES: Crow’s Feet Wrench Adapters Speed up Installations & Removals, Fitting Perfectly on any 3-8” Drive Ratchet, Extension Rod or Torque Wrench, Reaching inaccessible fasteners that sockets can’t get to – Great for Lawn Equipment, Car Automotive & Truck Work in tight Engine/Radiator Areas & Control Arms, or for underneath sink/toilet work like faucet spray hoses..
Check Stock

Jadeshay Air Ratchet 1/4\ Square Drive Straight Shank Pneumatic Air Ratchet Wrench Professional Tool

  • Powerful performance: The pneumatic ratchet wrench delivers up to 16 ft/lbs of torque at a free speed of 300 RPM providing comfort, durability, and impressive power.
  • Comfort and safety: Ergonomic coupling nut and handle ensure a comfortable grip with no sharp edges.Slim body design molded to securely fit and balance hand torque to help reduce vibration and fatigue with less wear on your hands..
  • Easy to operate: Low-profile forward/reverse control has a wide diameter for easy gripping and also eliminates accidentally changing directions in confined spaces..
  • Better Access: The slim head profile and elongated neck provide users with the longest reachable distance in a narrow space, which allows you to enter deep, narrow and hard-to-reach places, allowing more access.
  • Widely used: This ratchet wrench is best for general engine repair, home projects, and light industrial applications.Suitable for shipbuilding, machinery manufacturing and auto industry and other fields..
Check Stock

4882 Rear Wheel Axle Torque Wrench Hand Tools Similar to HD-47925

  • Allows for simple adjustment of drive belt tension or rear wheel alignment , It helps with getting the axle nut loose without taking the muffler off my Ultra, just to adjust the belt tension..
  • 36mm wrench includes a 1/2 inch square drive allowing for use with a torque wrench for proper axle torque.
  • This wrench has a 1/2" drive hole, Remember, if attaching to your torque wrench, this wrench MUST be turned 90 degrees from the direction of your torque wrench. Positioning it this way means it does not alter the length of your torque wrench and screw up your torque..
  • Material ： The wrench is finished in a pretty durable black finish..
  • Made removing and re-torquing the axle nut easy without removing the right side muffler. Still had to remove left side muffler to remove the axle. Saved some time and made the job a lot easier..
  • [ 100% Satisfaction quality and service ] — If you're not 100% satisfied with our PRODUCTS, simply return it for a full refund in 30 days. Professional AND Sincere Service allows you to take no risks to purchase..
Check Stock

TEKTON 1/2 Inch Drive Split Beam Torque Wrench (40-250 ft.-lb.) | TRQ62203

  • Includes 1-pc. 1/2 in. drive torque wrench.
  • Product manual with torque conversion chart.
  • Accurate to +-4% throughout the entire 40-250 ft.-lb. torque range.
  • Each torque wrench is serialized and calibrated according to the ASME B107.300-2010 standard and the detailed test results are recorded on the included certificate.
  • A smooth-turning thumbscrew makes it easy to set a precise torque value, while the teeth inside the flip-up cover lock that torque setting in place during use.
  • Unlike other torque wrench designs, this wrench can be stored at any torque setting without losing accuracy.
  • A scale on the body of the wrench allows for quick conversion from foot-pounds to newton-meters.
Check Stock

TEKTON 3/8 Inch Drive Split Beam Torque Wrench (20-100 ft.-lb.) | TRQ62103

  • Includes 1-pc. 3/8 in. drive torque wrench.
  • Product manual with torque conversion chart.
  • Accurate to +-4% throughout the entire 20-100 ft.-lb. torque range.
  • Each torque wrench is serialized and calibrated according to the ASME B107.300-2010 standard and the detailed test results are recorded on the included certificate.
  • A smooth-turning thumbscrew makes it easy to set a precise torque value, while the teeth inside the flip-up cover lock that torque setting in place during use.
  • Unlike other torque wrench designs, this wrench can be stored at any torque setting without losing accuracy.
  • A scale on the body of the wrench allows for quick conversion from foot-pounds to newton-meters.
Check Stock

LIBRATON Bike Torque Wrench 1/4'', 5-25Nm, 0.1 Nm Micro, Torque Wrench, Drive Click Torque Wrench Set, Hex, Torx/Star Bit Sockets, Extension Bar, Bicycle Maintenance Kit, Professional Bicycle Tool

  • One Set for All Needs: Libraton bike torque wrench set includes 1/4'' Drive Torque Wrench, hex bit sockets (2, 2.5, 3, 4, 5, 6, 8,10mm), Torx/star bit sockets (T10, T20, T25, T30), 1/4'' extension bar and a storage box. A great set for your bicycle or motorcycle maintenance..
  • Quality Guarantee: The 1/4 torque wrench head is made of chromium-molybdenum alloy (Cr-Mo Steel), higher strength than chromium-vanadium steel (Cr-V steel). Aluminum-titanium alloy handle ensure a comfortable and anti-slip grip. Premium spring-loaded adjustment collar can be locked at the settled torque value automatically, which ensures stable working..
  • Accuracy Guarantee: Over-tightening or over-loosening torque highly causes bolts out of their job. Therefore a high-accuracy torque wrench is always needed. Our drive click torque wrench has a 5-25Nm working range with micro-adjustment to 0.1Nm, which helps you to set the expected torque value as needed. We also made tests on each of our bicycle torque wrenches to make sure pre-calibrated to an accuracy of ±3% (Normal torque wrenches only at ±4% )..
  • Easy to Use: Bicycle torque wrench is equipped with a quick adjustment mechanism making you change the torque value smoothly. And a "Click" sound can clearly tell pre-set torque value....
Check Stock

ARES 43007 - 3/8-Inch Drive Flex Head Electronic Digital Torque and Torque Angle Wrench - 10-100 ft/lbs (13.5-135Nm) - Reversible Sealed Head - Multi-Alert Prevents Over-Torquing

  • SPECIFICATIONS: The ARES 3/8-Inch Drive Flex Head Electronic Digital Torque and Torque Angle Wrench measures within 10-100 ft/lbs (13.5-135Nm) with an accuracy tolerance of ±2% clockwise and measures torque angle with 3 separate modes: Peak Torque, Torque Angle and Peak Torque Angle. The easy-to-use digital LCD interface lets you adjust your specified torque with the push of a button and switch between five units of measurement: Nm, ft/lbs, in/lbs, kgf/m, and kgf/cm..
  • DESIGN: This digital torque wrench features a multi-alert system to help ensure you do not ever over-torque a bolt. When your specified torque is reached, the proprietary ergonomic comfort grip handle will vibrate, a audible buzzer will sound, and the LCD display back light will flash and then light up a solid red color to let you know it’s time to release. Each torque wrench also offers ten presets, so you can save and select your most frequently used torque and angle settings..
  • FLEXIBILITY: Each electronic digital torque wrench features a flex head ratchet design with peak torque, torque angle, and peak torque angle modes, so you can get exactly the right torque in exactly the right position. The “Peak Torque Angle” mode measures specified torque and immediately measures tor....
Check Stock

Rear Axle 36MM Wrench Rear Wheel Axle Torque Wrench Hand Tools Similar to HD-47925

  • 1. Used for simple adjustment of drive belt tension or rear wheel alignment.No need to remove any exhaust components..
  • 2. Heavy duty enabling the use of great force and striking.Similar to HD-47925.
  • 3. Made removing and re-torquing the axle nut easy without removing the right side muffler. Still had to remove left side muffler to remove the axle. Saved some time and made the job a lot easier..
  • 4. Feature: This 36mm wrench includes a 1/2 inch square drive allowing for use with a torque wrench for proper axle torque.Remember, if attaching to your torque wrench, this wrench MUST be turned 90 degrees from the direction of your torque wrench. Positioning it this way means it does not alter the length of your torque wrench and screw up your torque..
  • 5. Package included: -- 1x 36mm Rear Axle Wrench.
Check Stock