ReviewsTotalboat Marine Varnish

TotalBoat TotalBilge Epoxy Based Bilge Paint for Boat Bilges, Bulkheads, Engine Rooms and Locker Areas, White, 1 Quart (Pack of 1)

  • ...roblems before they become costly damage, or find items accidentally dropped into the bilge.
  • both colors offer excellent coverage and hide.
  • EASY TO USE: Apply 1-2 coats by brushing, rolling or spraying on prepared fiberglass, wood and metal.
  • prime prepared metals with TotalBoat TotalProtect.
  • for fiberglass prime with TotalProtect if desired.
  • for wood use TotalBoat Topside Primer if desired.
  • EASY TO KEEP CLEAN: Remove grease, oil, and grime from the high-gloss finish using a cleaner/degreaser. TotalBilge won't lift, crack, peel, or stain.
  • CHOOSE COLOR AND SIZE: Available in White and Gray colors, in Quart and Gallon Sizes. COVERAGE: 250-300 sq ft/gal.
  • THINNING: Brush/Roll Application - TotalBoat Special Brushing Thinner 100.
Check Stock

Interlux YBA068A/16 Trilux 33 Aerosol Antifouling Paint - White, 16 oz.

  • HIGH-PERFORMANCE MARINE ANTIFOULING BOAT BOTTOM PAINT provides superior single-season protection against barnacles, weeds, algae & slime in fresh water, salt water, and brackish water.
  • COPPER FREE FORMULA won't cause galvanic corrosion on aluminum boats, outdrives and trim tabs.
  • copper-free paint also means colors are much brighter than bottom paint that contains copper biocide.
  • FOR USE ON FIBERGLASS, WOOD, STEEL, IRON & ALUMINUM BOATS below the waterline only.
  • haul and relaunch without losing the effectiveness of the biocide.
  • EASY TO APPLY: For brushing, use a high-quality, natural bristle brush.
  • for rolling, use a 3/16” nap or foam solvent-safe roller cover.
  • if needed, thin with TotalBoat Special Brushing Thinner 100 (brushing/rolling) or TotalBoat Spray Thinner 101 (spraying).
  • AVAILABLE IN FIVE BRIGHT, VIBRANT COLORS: Blue (Quart & Gallon), Black (Quart & Gallon), White (Quart & Gallon), Green (Gallon only), and Red (Gallon only).
  • after applying, there’s no maximum dry time before launch.
Check Stock

TotalBoat Marine Topside Boat Paint Primer for Fiberglass and Wood White Gallon

  • ONE-PART MARINE PRIMER FOR BOATS provides a durable, flexible undercoat for 1-part and 2-part polyurethane and enamel marine topside paint.
  • COVERS COMPLETELY IN JUST ONE COAT: High-solids primer seals the surface with 1 thin coat.
  • apply a second coat only if a higher build is needed.
  • EASY TO APPLY BY BRUSHING, ROLLING OR SPRAYING: Use a natural bristle paint brush, a 1/8 " solvent-safe foam roller, or to spray, use a 1.1mm tip.
  • DRIES FAST, CURES TO A SMOOTH, HARD FINISH: Ready to sand in 60-90 minutes at 65°F.
  • marine paint primer is easy to sand, then just wipe clean and....
  • AVAILABLE IN WHITE AND GRAY IN QUART AND GALLON SIZES. Brush/roller application - thin with TotalBoat Special Brushing Thinner 100.
Check Stock

TotalBoat Marine Topside Boat Paint Primer for Fiberglass and Wood White Quart

  • ONE-PART MARINE PRIMER FOR BOATS provides a durable, flexible undercoat for 1-part and 2-part polyurethane and enamel marine topside paint.
  • COVERS COMPLETELY IN JUST ONE COAT: High-solids primer seals the surface with 1 thin coat.
  • apply a second coat only if a higher build is needed.
  • EASY TO APPLY BY BRUSHING, ROLLING OR SPRAYING: Use a natural bristle paint brush, a 1/8 " solvent-safe foam roller, or to spray, use a 1.1mm tip.
  • DRIES FAST, CURES TO A SMOOTH, HARD FINISH: Ready to sand in 60-90 minutes at 65°F.
  • marine paint primer is easy to sand, then just wipe clean and....
  • AVAILABLE IN WHITE AND GRAY IN QUART AND GALLON SIZES. Brush/roller application - thin with TotalBoat Special Brushing Thinner 100.
Check Stock

TotalBoat Spartan Boat Bottom Paint | Multi-Season Marine Antifouling (Blue, Quart)

  • MARINE BOTTOM PAINT FOR MULTI-SEASON PROTECTION IN HIGH FOULING CONDITIONS: High copper content (38% cuprous oxide) for maximum antifouling protection against barnacles & slime for sailboats & power boats in fresh, salt and brackish waters.
  • SMOOTH, ABRASION-RESISTANT FINISH FOR MAXIMUM PERFORMANCE: Offers maximum speed and fuel efficiency.
  • advanced copolymer ablative formula offers continuous antifouling protection whether the boat is at anchor or underway.
  • HAUL AND RELAUNCH WITHOUT REPAINTING: Hauled your boat for longer than 2 weeks? Simply scuff lightly to reactivate this paint's antifouling properties.
  • ablative formula reduces paint buildup, which means no heavy sanding next time you apply bottom paint.
  • EASY TO APPLY, DRIES FAST: Apply by brushing, rolling or spraying on fiberglass, wood, steel and previously painted surfaces in good conditions. THINNING: Brush/roller application - TotalBoat Special Brushing Thinner 100.
  • Spray application - TotalBoat Spray Thinner 101.
  • AVAILABLE IN BLACK, BLUE, GREEN & RED COLORS in Gallon size.
  • Black and Blue are also available in Quarts.
  • NOTE: This paint has no maximum dry time before launching your boat is required.
Check Stock

Fiberglass Supply Depot Inc. Black Gelcoat No Wax Pint with 15cc Hardener (MEKP)

  • once cured, it's easy to sand, buff and polish to a high-gloss, showroom shine.
  • COVERAGE: Approximately 12.8 sq ft/gal at 1/8" thick.
  • IMPORTANT APPLICATION NOTE: If applying over epoxy fairing compound, apply TotalBoat 2-Part Epoxy Primer or TotalBoat TotalProtect epoxy primer before applying gelcoat.
  • AVAILABLE IN GALLON SIZE, IN BLACK, LIGHT GRAY, AND MOON DUST COLORS, WITH WAX: Includes MEKP catalyst.
Check Stock

TotalBoat Krypton Copper Free Antifouling – Marine Ablative Boat Bottom Paint | For Fiberglass, Wood, Aluminum & Steel Boats | Ideal for Outdrives & Trim Tabs (Black, Gallon)

  • HIGH-PERFORMANCE MARINE ANTIFOULING BOAT BOTTOM PAINT provides superior single-season protection against barnacles, weeds, algae & slime in fresh water, salt water, and brackish water.
  • COPPER FREE FORMULA won’t cause galvanic corrosion on aluminum boats, outdrives and trim tabs.
  • copper-free paint also means colors are much brighter than bottom paint that contains copper biocide.
  • FOR USE ON FIBERGLASS, WOOD, STEEL, IRON & ALUMINUM BOATS below the waterline only.
  • haul and relaunch without losing the effectiveness of the biocide.
  • EASY TO APPLY: For brushing, use a high-quality, natural bristle brush.
  • for rolling, use a 3/16” nap or foam solvent-safe roller cover.
  • if needed, thin with TotalBoat Special Brushing Thinner 100 (brushing/rolling) or TotalBoat Spray Thinner 101 (spraying).
  • AVAILABLE IN FIVE BRIGHT, VIBRANT COLORS: Blue (Quart & Gallon), Black (Quart & Gallon), White (Quart & Gallon), Green (Gallon only), and Red (Gallon only).
  • after applying, there’s no maximum dry time before launch.
Check Stock

TotalBoat Spartan Antifouling Bottom Paint for Boats - Multi-Season Protection for Fiberglass Wood and Steel Black Gallon

  • MARINE BOTTOM PAINT FOR MULTI-SEASON PROTECTION IN HIGH FOULING CONDITIONS: High copper content (38% cuprous oxide) for maximum antifouling protection against barnacles & slime for sailboats & power boats in fresh, salt and brackish waters.
  • SMOOTH, ABRASION-RESISTANT FINISH FOR MAXIMUM PERFORMANCE: Offers maximum speed and fuel efficiency.
  • advanced copolymer ablative formula offers continuous antifouling protection whether the boat is at anchor or underway.
  • HAUL AND RELAUNCH WITHOUT REPAINTING: Hauled your boat for longer than 2 weeks? Simply scuff lightly to reactivate this paint's antifouling properties.
  • ablative formula reduces paint buildup, which means no heavy sanding next time you apply bottom paint.
  • EASY TO APPLY, DRIES FAST: Apply by brushing, rolling or spraying on fiberglass, wood, steel and previously painted surfaces in good conditions. THINNING: Brush/roller application - TotalBoat Special Brushing Thinner 100.
  • Spray application - TotalBoat Spray Thinner 101.
  • AVAILABLE IN BLACK, BLUE, GREEN & RED COLORS in Gallon size.
  • Black and Blue are also available in Quarts.
  • NOTE: This paint has no maximum dry time before launching your boat is required.
Check Stock

TotalBoat Krypton Copper Free Antifouling – Marine Ablative Boat Bottom Paint | for Fiberglass, Wood, Aluminum & Steel Boats | Ideal for Outdrives & Trim Tabs (Black, Quart)

  • HIGH-PERFORMANCE MARINE ANTIFOULING BOAT BOTTOM PAINT provides superior single-season protection against barnacles, weeds, algae & slime in fresh water, salt water, and brackish water.
  • COPPER FREE FORMULA won't cause galvanic corrosion on aluminum boats, outdrives and trim tabs.
  • copper-free paint also means colors are much brighter than bottom paint that contains copper biocide.
  • FOR USE ON FIBERGLASS, WOOD, STEEL, IRON & ALUMINUM BOATS below the waterline only.
  • haul and relaunch without losing the effectiveness of the biocide.
  • EASY TO APPLY: For brushing, use a high-quality, natural bristle brush.
  • for rolling, use a 3/16” nap or foam solvent-safe roller cover.
  • if needed, thin with TotalBoat Special Brushing Thinner 100 (brushing/rolling) or TotalBoat Spray Thinner 101 (spraying).
  • AVAILABLE IN FIVE BRIGHT, VIBRANT COLORS: Blue (Quart & Gallon), Black (Quart & Gallon), White (Quart & Gallon), Green (Gallon only), and Red (Gallon only).
  • after applying, there’s no maximum dry time before launch.
Check Stock

TotalBoat Krypton Copper Free Antifouling – Marine Ablative Boat Bottom Paint | for Fiberglass, Wood, Aluminum & Steel Boats | Ideal for Outdrives & Trim Tabs (Blue, Quart)

  • HIGH-PERFORMANCE MARINE ANTIFOULING BOAT BOTTOM PAINT provides superior single-season protection against barnacles, weeds, algae & slime in fresh water, salt water, and brackish water.
  • COPPER FREE FORMULA won't cause galvanic corrosion on aluminum boats, outdrives and trim tabs.
  • copper-free paint also means colors are much brighter than bottom paint that contains copper biocide.
  • FOR USE ON FIBERGLASS, WOOD, STEEL, IRON & ALUMINUM BOATS below the waterline only.
  • haul and relaunch without losing the effectiveness of the biocide.
  • EASY TO APPLY: For brushing, use a high-quality, natural bristle brush.
  • for rolling, use a 3/16” nap or foam solvent-safe roller cover.
  • if needed, thin with TotalBoat Special Brushing Thinner 100 (brushing/rolling) or TotalBoat Spray Thinner 101 (spraying).
  • AVAILABLE IN FIVE BRIGHT, VIBRANT COLORS: Blue (Quart & Gallon), Black (Quart & Gallon), White (Quart & Gallon), Green (Gallon only), and Red (Gallon only).
  • after applying, there’s no maximum dry time before launch.
Check Stock

TotalBoat Krypton Copper Free Antifouling – Marine Ablative Boat Bottom Paint | For Fiberglass, Wood, Aluminum & Steel Boats | Ideal for Outdrives & Trim Tabs (Red, Gallon)

  • HIGH-PERFORMANCE MARINE ANTIFOULING BOAT BOTTOM PAINT provides superior single-season protection against barnacles, weeds, algae & slime in fresh water, salt water, and brackish water.
  • COPPER FREE FORMULA won't cause galvanic corrosion on aluminum boats, outdrives and trim tabs.
  • copper-free paint also means colors are much brighter than bottom paint that contains copper biocide.
  • FOR USE ON FIBERGLASS, WOOD, STEEL, IRON & ALUMINUM BOATS below the waterline only.
  • haul and relaunch without losing the effectiveness of the biocide.
  • EASY TO APPLY: For brushing, use a high-quality, natural bristle brush.
  • for rolling, use a 3/16” nap or foam solvent-safe roller cover.
  • if needed, thin with TotalBoat Special Brushing Thinner 100 (brushing/rolling) or TotalBoat Spray Thinner 101 (spraying).
  • AVAILABLE IN FIVE BRIGHT, VIBRANT COLORS: Blue (Quart & Gallon), Black (Quart & Gallon), White (Quart & Gallon), Green (Gallon only), and Red (Gallon only).
  • after applying, there’s no maximum dry time before launch.
Check Stock