ReviewsTotalboat Paint

TotalBoat Marine Topside Boat Paint Primer for Fiberglass and Wood White Quart

ONE-PART MARINE PRIMER FOR BOATS provides a durable, flexible undercoat for 1-part and 2-part polyurethane and enamel marine topside paint.
COVERS COMPLETELY IN JUST ONE COAT: High-solids primer seals the surface with 1 thin coat.
apply a second coat only if a higher build is needed.
EASY TO APPLY BY BRUSHING, ROLLING OR SPRAYING: Use a natural bristle paint brush, a 1/8 " solvent-safe foam roller, or to spray, use a 1.1mm tip.
DRIES FAST, CURES TO A SMOOTH, HARD FINISH: Ready to sand in 60-90 minutes at 65°F.
marine paint primer is easy to sand, then just wipe clean and....
AVAILABLE IN WHITE AND GRAY IN QUART AND GALLON SIZES. Brush/roller application - thin with TotalBoat Special Brushing Thinner 100.

Check Stock

Pantone Fashion Home & Interiors Guide FHIP110N 2,310 Colors 2 Count Pack of 1 FHI Home & Interiors-FHIP110N

NON-SKID DECK PAINT: Durable, textured, low-glare high-traction surface for secure footing, with a comfortable rubberized texture that's less abrasive....
LONG-LASTING POLYURETHANE FINISH: Durable coating won't fade or peel.
easy to clean - scrubbing won't wear away the finish.
NON-SLIP PAINT WITH MANY APPLICATIONS: Boat decks, docks, cabin soles, hatches, stairs, steps, gunwales, swim platforms, concrete, patios, floors, and....
1-PART PAINT IS EASY TO APPLY by brush or roller on fiberglass, wood, properly primed aluminum, metals, and previously painted surfaces.
COMES IN PAINT COLORS TO MATCH TOPSIDES OR EXISTING NON SKID PATTERNS: Sand Beige, Kingston Gray, Light Gray, White (tintable with TotalBoat Wet Edge....

Check Stock

TotalBoat TotalBilge Epoxy Based Bilge Paint for Boat Bilges Bulkheads Engine Rooms and Locker Areas Gray Quart

TOUGH, WATERPROOF BILGE PAINT: This marine paint resists chemicals, oils, acids, alkyds and solvents. Hard, durable epoxy coating is ideal for boat....
CHOOSE LIGHT GRAY OR WHITE: Paint boat bilge areas to protect and brighten so you can find & fix leaks and other problems before they become costly....
EASY TO USE: Apply 1-2 coats by brushing, rolling or spraying on prepared fiberglass, wood and metal.
EASY TO KEEP CLEAN: Remove grease, oil, and grime from the high-gloss finish using a cleaner/degreaser. TotalBilge won't lift, crack, peel, or stain.
CHOOSE COLOR AND SIZE: Available in White and Gray colors, in Quart and Gallon Sizes. COVERAGE: 250-300 sq ft/gal.

Check Stock

TotalBoat-488366 TotalBilge Epoxy Based Bilge Paint for Boat Bilges Bulkheads Engine Rooms and Locker Areas White Gallon

TOUGH, WATERPROOF BILGE PAINT: This marine paint resists chemicals, oils, acids, alkyds and solvents. Hard, durable epoxy coating is ideal for boat....
CHOOSE LIGHT GRAY OR WHITE: Paint boat bilge areas to protect and brighten so you can find & fix leaks and other problems before they become costly....
EASY TO USE: Apply 1-2 coats by brushing, rolling or spraying on prepared fiberglass, wood and metal.
EASY TO KEEP CLEAN: Remove grease, oil, and grime from the high-gloss finish using a cleaner/degreaser. TotalBilge won't lift, crack, peel, or stain.
CHOOSE COLOR AND SIZE: Available in White and Gray colors, in Quart and Gallon Sizes. COVERAGE: 250-300 sq ft/gal.

Check Stock

TotalBoat Spartan Boat Bottom Paint | Multi-Season Marine Antifouling (Green, Gallon)

MARINE BOTTOM PAINT FOR MULTI-SEASON PROTECTION IN HIGH FOULING CONDITIONS: High copper content (38% cuprous oxide) for maximum antifouling protection against barnacles & slime for sailboats & power boats in fresh, salt and brackish waters.
SMOOTH, ABRASION-RESISTANT FINISH FOR MAXIMUM PERFORMANCE: Offers maximum speed and fuel efficiency.
advanced copolymer ablative formula offers continuous antifouling protection whether the boat is at anchor or underway.
HAUL AND RELAUNCH WITHOUT REPAINTING: Hauled your boat for longer than 2 weeks? Simply scuff lightly to reactivate this paint's antifouling properties.
ablative formula reduces paint buildup, which means no heavy sanding next time you apply bottom paint.
EASY TO APPLY, DRIES FAST: Apply by brushing, rolling or spraying on fiberglass, wood, steel and previously painted surfaces in good conditions. THINNING: Brush/roller application - TotalBoat Special Brushing Thinner 100.
AVAILABLE IN BLACK, BLUE, GREEN & RED COLORS in Gallon size.
Black and Blue are also available in Quarts.
NOTE: There is no maximum dry time before launching.

Check Stock

TotalBoat-488394 Spartan Boat Bottom Paint | Multi-Season Marine Antifouling (Black, Quart)

MARINE BOTTOM PAINT FOR MULTI-SEASON PROTECTION IN HIGH FOULING CONDITIONS: High copper content (38% cuprous oxide) for maximum antifouling protection against barnacles & slime for sailboats & power boats in fresh, salt and brackish waters.
SMOOTH, ABRASION-RESISTANT FINISH FOR MAXIMUM PERFORMANCE: Offers maximum speed and fuel efficiency.
advanced copolymer ablative formula offers continuous antifouling protection whether the boat is at anchor or underway.
HAUL AND RELAUNCH WITHOUT REPAINTING: Hauled your boat for longer than 2 weeks? Simply scuff lightly to reactivate this paint's antifouling properties.
ablative formula reduces paint buildup, which means no heavy sanding next time you apply bottom paint.
EASY TO APPLY, DRIES FAST: Apply by brushing, rolling or spraying on fiberglass, wood, steel and previously painted surfaces in good conditions. THINNING: Brush/roller application - TotalBoat Special Brushing Thinner 100.
AVAILABLE IN BLACK, BLUE, GREEN & RED COLORS in Gallon size.
Black and Blue are also available in Quarts.
NOTE: There is no maximum dry time before launching.

Check Stock

TotalBoat TB-TREADGG Non-Skid Deck Paint Marine-Grade Anti-Slip Traction Coating for Boats Wood Fiberglass Aluminum and Metals Gray Gallon

NON-SKID DECK PAINT: Durable, textured, low-glare high-traction surface for secure footing, with a comfortable rubberized texture that's less abrasive....
LONG-LASTING POLYURETHANE FINISH: Durable coating won't fade or peel.
easy to clean - scrubbing won't wear away the finish.
NON-SLIP PAINT WITH MANY APPLICATIONS: Boat decks, docks, cabin soles, hatches, stairs, steps, gunwales, swim platforms, concrete, patios, floors, and....
1-PART PAINT IS EASY TO APPLY by brush or roller on fiberglass, wood, properly primed aluminum, metals, and previously painted surfaces.
COMES IN PAINT COLORS TO MATCH TOPSIDES OR EXISTING NON SKID PATTERNS: Sand Beige, Kingston Gray, Light Gray, White (tintable with TotalBoat Wet Edge....

Check Stock

TotalBoat TotalTread Non-Skid Deck Paint, Marine-Grade Anti-Slip Traction Coating for Boats, Wood, Fiberglass, Aluminum, and Metals (Beige, Quart)

NON-SKID DECK PAINT: Durable, textured, low-glare high-traction surface for secure footing, with a comfortable rubberized texture that's less abrasive than traditional silica additives.
LONG-LASTING POLYURETHANE FINISH: Durable coating won't fade or peel.
easy to clean - scrubbing won't wear away the finish.
affordable way to bring your old boat flooring back to life.
NON-SLIP PAINT WITH MANY APPLICATIONS: Boat decks, docks, cabin soles, hatches, stairs, steps, gunwales, swim platforms, concrete, patios, floors, and anywhere else you need sure footing.
1-PART PAINT IS EASY TO APPLY by brush or roller on fiberglass, wood, properly primed aluminum, metals, and previously painted surfaces.
add a second coat for greater traction. Coverage: 250-300 sq. ft. per gallon.
COMES IN PAINT COLORS TO MATCH TOPSIDES OR EXISTING NON SKID PATTERNS: Sand Beige, Kingston Gray, Light Gray, White (tintable with TotalBoat Wet Edge Topside Paint). Available in Quarts and Gallons.

Check Stock

TotalBoat TotalTread Non-Skid Deck Paint Marine-Grade Anti-Slip Traction Coating for Boats Wood Fiberglass Aluminum and Metals Light Gray Gallon

NON-SKID DECK PAINT: Durable, textured, low-glare high-traction surface for secure footing, with a comfortable rubberized texture that's less abrasive than traditional silica additives.
LONG-LASTING POLYURETHANE FINISH: Durable coating won't fade or peel.
easy to clean - scrubbing won't wear away the finish.
affordable way to bring your old boat flooring back to life.
NON-SLIP PAINT WITH MANY APPLICATIONS: Boat decks, docks, cabin soles, hatches, stairs, steps, gunwales, swim platforms, concrete, patios, floors, and anywhere else you need sure footing.
1-PART PAINT IS EASY TO APPLY by brush or roller on fiberglass, wood, properly primed aluminum, metals, and previously painted surfaces.
add a second coat for greater traction. Coverage: 250-300 sq. ft. per gallon.
COMES IN PAINT COLORS TO MATCH TOPSIDES OR EXISTING NON SKID PATTERNS: Sand Beige, Kingston Gray, Light Gray, White (tintable with TotalBoat Wet Edge Topside Paint). Available in Quarts and Gallons.

Check Stock

TotalBoat-520120 TotalTread Non-Skid Deck Paint, Marine-Grade Anti-Slip Traction Coating for Boats, Wood, Fiberglass, Aluminum, and Metals (Light Gray, Quart)

UNIQUE NON-SKID DECK PAINT: Durable, textured, low-glare high-traction surface for secure footing, with a comfortable rubberized texture that’s less abrasive than traditional silica additives: One part polyurethane non-skid deck paint creates a durable, high-traction surface for comfortable, secure footing and a finish that’s less abrasive than traditional silica additives.
LONG-LASTING POLYURETHANE FINISH: Durable coating won’t fade or peel.
easy to clean – scrubbing won’t wear away the finish.
affordable way to bring your old boat flooring back to life.
NON-SLIP PAINT WITH MANY APPLICATIONS: Boat decks, docks, cabin soles, hatches, stairs, steps, gunwales, swim platforms, concrete, patios, floors, and anywhere else you need sure footing.
1-PART PAINT IS EASY TO APPLY by brush or roller on fiberglass, wood, properly primed aluminum, metals, and previously painted surfaces.
add a second coat for greater traction. Coverage: 250-300 sq. ft. per gallon.
COMES IN PAINT COLORS TO MATCH TOPSIDES OR EXISTING NON SKID PATTERNS: Sand Beige, Kingston Gray, Light Gray, White (tintable with TotalBoat Wet Edge Topside Paint). Available in Quarts and Gallons.

Check Stock

TotalBoat TotalTread Non-Skid Deck Paint, Marine-Grade Anti-Slip Traction Coating for Boats, Wood, Fiberglass, Aluminum, and Metals (White, Gallon)

...operly primed aluminum, metals, and previously painted surfaces.
add a second coat for greater traction. Coverage: 250-300 sq. ft. per gallon.
COMES IN PAINT COLORS TO MATCH TOPSIDES OR EXISTING NON SKID PATTERNS: Sand Beige, Kingston Gray, Light Gray, White (tintable with TotalBoat Wet Edge Topside Paint). Available in Quarts and Gallons.

Check Stock