ReviewsTowerpro Micro Servo Motors

Miuzei 10 Pcs SG90 9G Micro Servo Motor Kit for RC Robot Arm/Hand/Walking Helicopter Car Boat Control with Cable, Mini Small Servos for Arduino Project

  • Application Fields: Miuzei SG90 9G Servo Motor Compatible with Remote Control Helicopters, Micro Robot, Robot Arm and Boats. Support All Kind of R/C Toys and Arduino Experiments.
  • Interface Type: This SG90 Servo Compatible With JR & Futaba Interface. Miuzei Micro Servo 9g no Load Running Speed: 0.09±0.01 sec/60° at 4.8V.
  • Miuzei Micro Servo Motor Stall Torque (4.8V): 17.5oz /in (1kg/cm).
  • NOTE: The Starting Current of The Analog Servo Motor Should Be Over 1A and Miuzei Servo SG90 are Analog Servos Need to Continuously Provide a PMW Signal, Then it Will Be Work Normally.
  • How to Reach 180 degree -- Miuzei SG90 9g Servo Motor Need to Meet 4.8V Power Supply Voltage and 2500usec Pulse Signal, the Angle of Rotation.
Check Stock

RGBZONE 6Pcs MG90S 9G Geared Micro Servo Motor for Remote Control Helicopter Airplane Boat Smart Robot Car Micro Robot

  • MG90S micro servo motor, updated SG90 serve motor..
  • Mini micro Servo 450Dead band width: 10usec..
  • Fit for ALL kind of R/C Toys and also make electronics DIY based on Arduino ,Raspberry Pi, etc..
  • Gear Micro Servo Motor For robot Plane Helicopter Boat Car Horns servo Remote controlled aircraft for DIY..
  • The model is suitable for ordinary small electric aircraft models and is not recommended in large fixed wing and electric helicopter..
Check Stock

6-Pack MG996R Servo,Aideepen Metal Gear High Speed Torque Servo Digital Servo Motor for Smart Car,Robot,Boat,Helicopter,DIY

  • ✔️【Updated】MG996R micro servo motor, updated from SG90 micro servo and MG90S micro servo motor, increase the speed, tension and accuracy..
Check Stock

2-Pack Metal Aluminum 25T Servo Horn Steering Arms for 1/10 1/8 Scale RC Trucks Cars Buggies Airplane Replacement Upgrade Parts Blue

  • Compatible with:25T Spline & M3 threads,Compatible with Mostly Standard Servo Motors for HSP,Power HD,Futaba, Axial ,Savox ,Xcore, MG995 MG996R MG946R....
  • The Double Arms：47x10x7.5mm (Hole centers at 12 and 20mm from the servo output.).
  • The Short Arm：28x10x7.5mm(Hole centers at 12 and 20mm from the servo output.).
  • Spare part:The RC 25T Servo Horn Steering Arms Easy and convenient to install and remove.Better than most of the plastic material..
Check Stock

Aluminum Long 25T Servo Horn w/5 Mounting Holes for Futaba Savox Servo,2-Pack

  • 24T Spline & M3 threads,Compatible with Hitec Servo Motors.
  • Aluminum CNC machined for precision,anodized finish.
  • Includes two steel bolts to secure the split-clamp onto the servo output.
  • Dimension:35x15x6mm (Hole centers at 20 and 24mm from the servo output.).
Check Stock

Hobbypark 5-Pack M3 25T Aluminum Metal Servo Horn for Futaba Savox Xcore HL HSP HD Servo Motors

  • 25T Spline & M3 threads Compatible with Mostly Standard Servo Motors.
  • Aluminum CNC machined for precision,anodized finish.
  • Includes two steel bolts to secure the split-clamp onto the servo output.
  • Dimension:35x15x6mm (Hole centers at 20 and 24mm from the servo output.).
Check Stock

KST DS215MG Micro Digital Servo

  • 100% NEW brand,high quality. Stall Torque (4.8V): 17.5oz /in (1kg/cm).
  • It is tiny and lightweight with high output power..
  • Compatible with the project like Robot Arm/ Robot hand/ control the servo with potentiometer/ multi servo control..
  • The SG90 has 3 wire interfaces in which the connections should be made as follows: Red wire-5V, Brown Wire-Ground, Yellow wire-digital pin 9..
  • SG90 9G micro servo motor for remote control helicopters, micro robot, robot arm and boats..
Check Stock

REEFS RC 99 Micro Servo Mount, SEHREEFS82

  • Servo mount for micro servos, designed for our 99Micro Servo and 99Micro Winch.
Check Stock

[4-Pack] MG996R 55g Metal Gear Torque Digital Servo Motor for Futaba JR RC Helicopter Car Boat Robot

  • This MG996R Servo motor which updated from SG90 and MG90S micro servo motor. (the Speed, Tension and Accuracy all increase).
  • The MG996R model compliant with most standard receiver connector,for Futaba, Hitec, Sanwa, GWS etc..
  • Power Supply: Through External Adapter. Stable and Shock Proof. Coreless Motor , Metal Gear ..
  • Torque at 6V 12kg/cm, 7.2V 13kg/cm.(Recommended voltage: 5V, current usage: 3A ). Positioning speed at 4.8V without load 0.17s / 60 degrees.
  • Universally Applicable: Micro Servo Motor for 1:10 RC car robot helicopter servo remote controlled aircraft and suitable for most DIY projects..
Check Stock

[2-Pack] MG996R 55g Metal Gear Torque Digital Servo Motor for Futaba JR RC Helicopter Car Boat Robot

  • The MG996R model compliant with most standard receiver connector,for Futaba, Hitec, Sanwa, GWS etc..
  • This MG996R Servo motor which updated from SG90 and MG90S micro servo motor. (the Speed, Tension and Accuracy all increase).
  • Power Supply: Through External Adapter. Stable and Shock Proof. Coreless Motor , Metal Gear ..
  • Torque at 6V 12kg/cm, 7.2V 13kg/cm.(Recommended voltage: 5V, current usage: 3A ). Positioning speed at 4.8V without load 0.17s / 60 degrees.
  • Universally Applicable: Micro Servo Motor for 1:10 RC car robot helicopter servo remote controlled aircraft and suitable for most DIY projects..
Check Stock

diymore 6Sets MG996R 55g Digital Metal Gear Servo Motor + MG995 MG996R Metal Servo Arm 25T Disc Metal Horns for Robot Arm RC Helicopter Airplane Car Boat Robot

  • 【Package】Package included 6 sets MG996R metal gear servo motor+25T Disc metal horns..
  • 【Updated version】MG996R Micro Servo motor, which updated from SG90 Micro Servo and MG90S micro servo motor. The speed of MG996r is faster, the accuracy is much improved and the tension is increased..
  • 【Quality】180°rotation high torque,Stable and shock proof and also of high speed.Can compatible with most standard receiver connector: Futaba, Hitec, Sanwa, GWS, etc..
  • 【Parameter】Torsional moment: 12kg/cm(6V), 13kg.cm.at(7.2V).
  • Operating Speed : 0.17sec / 60 degrees (4.8V no load).
  • Operating Speed : 0.13sec / 60 degrees (6.0V no load)..
  • 【Application】Biped robot/manipulator/remote control car, suitable for 50-90 grade methanol fixed-wing~aircraft and 26cc-50cc gasoline fixed-wing aircraft and other models..
Check Stock