ReviewsTowing Hitch Towing Mirrors Toyota

CURT 13416 Class 3 Trailer Hitch 2-Inch Receiver Fits Select Toyota RAV4

  • DEPENDABLE STRENGTH. This trailer hitch is rated for 4,000 lbs. gross trailer weight, 600 lbs. tongue weight, 4,000 lbs. weight distribution capacity and 600 lbs. weight distribution tongue weight (limited to lowest-rated towing component).
  • VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more.
  • FULLY TESTED. Every CURT class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Aftermarket hitches are tested according to SAE J684 standards for the utmost safety while hauling.
  • RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid A-coat and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays.
  • EASY TO INSTALL. This hitch offers a custom, factory fit on select model years of the Toyota RAV4.
Check Stock

CURT 112763 Class 1 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Toyota Prius

  • DEPENDABLE STRENGTH. With a strong, welded steel build, this class 1 hitch package is rated for 2,000 lbs. gross trailer weight and 200 lbs. tongue weight (limited to lowest-rated towing component).
  • HIGHLY VERSATILE. Add versatile towing options to your vehicle with this class 1 trailer hitch. It provides a standard, square 1-1/4-inch receiver hitch and comes with a ball mount with a 3/4-inch ball hole to connect a small trailer.
  • DUAL-COAT FINISH. For industry-leading rust, chip and UV resistance inside and out, this tow hitch is submersed in a liquid A-coat and co-cured with a durable black powder coat finish.
  • EASY INSTALLATION. This class 1 hitch kit fits select model years of the Toyota Prius, Prius Plug-In and Prius V.
  • TESTED FOR SAFETY. Each CURT class 1 trailer hitch design is thoroughly tested, using real vehicles in real-world conditions. Our hitches are tested to SAE J684 specifications for safety on the road ahead.
Check Stock

Towever 84180 Trailer Hitch Tri Ball Mount with Hook 3 Ball Hitch Fit for Towing Hitch 2 inch Receiver Hollow Shank Tow Hitch Black&Chrome

  • Our tri ball tow hitch fit class III/IV 2 inches hitch receivers. including Curt, Rola, Yakima, Inno, Draw-Tite, Blue Ox, Hidden Hitch, Thule, Tulga, U-Haul and other brands..
  • Three attached chrome trailer hitch balls sized 1-7/8 inches, 2 inches & 2-5/16 inches and one durable tow hook for towing strap.
  • Up to 200 pounds tongue weight and gross towing weight of 2000 pounds for 1-7/8 inch hitch ball, 600 pounds tongue weight and gross towing weight of 6000 pounds for 2 inch hitch ball, 1000 pounds tongue weight and gross towing weight of 10000 pounds for 2-5/16 inch hitch ball and 10000 pounds gross towing weight for towing hook, setup for truck, pickup, tractor with 2 inch standard hitch receiver or drawbars..
  • 7-1/2 inches Length Hollow Shank and 12" overall length for this trailer hitch ball mount.
  • Use 5/8 inches Hitch Pin or Lock.(not included).
Check Stock

CURT 13149 Class 3 Trailer Hitch, 2-Inch Receiver, Fits Select Toyota RAV4

  • DEPENDABLE STRENGTH. This trailer hitch is rated for 3,500 lbs. gross trailer weight, 525 lbs. tongue weight, 4,000 lbs. weight distribution capacity and 525 lbs. weight distribution tongue weight (limited to lowest-rated towing component).
  • VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more.
  • FULLY TESTED. Every CURT class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Aftermarket hitches are tested according to SAE J684 standards for the utmost safety while hauling.
  • RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid Bonderite and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays.
  • EASY TO INSTALL. This hitch offers a custom, factory fit on select model years of the Toyota RAV4. Material-Carbon Steel.
Check Stock

CURT 99302 Class 3 Trailer Hitch, 2-Inch Receiver, 4-Pin Wiring Harness, Select Toyota RAV4

  • DEPENDABLE STRENGTH. This trailer hitch is rated for 5,000 lbs. gross trailer weight and 500 lbs. tongue weight (limited to lowest-rated towing component).
  • VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more.
  • FULLY TESTED. Every CURT class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Aftermarket hitches are tested according to SAE J684 standards for the utmost safety while hauling.Drilling not required.
  • RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid Bonderite and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays.
  • EASY TO INSTALL. This hitch offers a custom, factory fit on select model years of the Toyota Highlander.
Check Stock

Reese 7031400 Tri-Ball Mount with Hook

  • Hitch ball sizes of 1-7/8 inches 2 inches and 2-5/16 inches.
  • Up to 200 pounds tongue weight and gross towing weight of 2000 pounds for 1-7/8 inch hitch ball 600 pounds tongue weight and gross towing weight of 6000 pounds for 2 inch hitch ball.
  • Up to 1000 pounds tongue weight and gross towing weight of 10000 pounds for 2-5/16 inch hitch ball and 10000 pounds gross towing weight for hook.
  • You should always consult the vehicles owners manual for maximum towing capacity.
Check Stock

CURT 13704 Camper Adjustable Trailer Hitch RV Towing, 2-Inch Receiver, 5,000 lbs., Fits Frames up to 66 Inches Wide

  • DEPENDABLE STRENGTH. This RV trailer hitch is rated for 5,000 lbs. gross trailer weight and 500 lbs. tongue weight (limited to lowest-rated towing component).
  • VERSATILE DESIGN. This trailer hitch RV equips your camper with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can be used for dinghy towing, flat towing or towing a trailer.
  • EASY TO INSTALL. Installation of this RV camper hitch is fast and easy. It securely bolts into place with the included grade-8 hardware and typically requires just a few tools. The 3-piece adjustable design fits RV frames up to 66 inches wide.
  • FULLY TESTED. Every CURT camper hitch design is tested at our Detroit engineering facility according to SAE J684 standards for the utmost safety and reliability while towing.
  • RUST, CHIP, UV-RESISTANT. This RV towing hitch is protected with a dual-coat finish of rust-resistant A-coat and highly durable black powder coat. The two finishes are co-cured for exceptional resistance to rust, chipping and UV damage.
Check Stock

TLAPS 7422451492419 For 1995-2004 Toyota Tacoma Class 3 III Black 2\ Trailer Hitch Receiver With 2 Inch Drop Loaded Ball Mount

  • Application: For 1995-2004 Toyota Tacoma All Models.
  • Trailer Hitch + Loaded Ball Mount ( Trailer Ball, Pin & Clip Are Included ).
  • Hitch Class: Class 3, Receiver Size: 2" Receiver Tube, Towing Specifications: Weight Carrying Capacity - 5000 lbs, Tongue Weight - 500 lbs, Weight Distribution - 6000 lbs, Weight Distribution Tongue Weight - 600 lbs.
  • Loaded Ball Mount: Receiver Size: 2" Receiver Tube, Towing Specifications: Gross Trailer Weight - 3500 lbs, Tongue Weight - 350 lbs, Trailer Ball Diameter - 1.875, 2" Drop For Trailer Leveling, Length" 8 1/4.
Check Stock

Shocker Air Equalizer & Round Bar Weight Distribution Hitch, Fits 3" Hitch 5" Rise 4" Drop

  • Smoother Safer Towing: Add instant air ride towing to your pickup & camper trailer with an air equalizer & weight-distribution hitch (easily bolt the weight-distribution head to air equalizer).  Absorbs Road Shock: Air equalizer absorbs the road shock & cushions the ride when towing a camper with a weight-distribution hitch. Weight Distribution Hitch: Evenly distributes the weight over the axles of tow your vehicle and trailer to add stability and control..
  • Air Ride Technology: Built in air bag + 4 bump cushions direct the road shock through the air spring. It is also Friction Sway Arm Compatible: Add your existing friction sway arm & mini ball system to the W-D hitch. Adjustable & Heavy-Duty: 12,000 lbs towing & 1,200 lbs tongue weight capacity plus 7" or 9" of Adjustment (5" of rise to 2" drop or choose 5" rise to 4" drop). Fine tune for your towing weight. Just add air for heavier loads. Designed for 6,000 to 11,500 lbs gtw camper trailers..
  • For 2-5/16" Couplers & Made Fits Pickup Trucks Only: The Air Equalizer is designed for pulling with a Pickup Truck ? it will not work with SUV/CUV with coil ov....
Check Stock

TLAPS 7422449423432 For 2008-2013 Toyota Highlander Class 3 III Black 2\ Trailer Hitch Receiver With 2 Inch Drop Loaded Ball Mount

  • Application: For 2008-2013 Toyota Highlander All Models.
  • Trailer Hitch + Loaded Ball Mount ( Trailer Ball, Pin & Clip Are Included ).
  • Hitch Class: Class 3, Receiver Size: 2" Receiver Tube, Towing Specifications: Weight Carrying Capacity - 5000 lbs, Tongue Weight - 500 lbs, Weight Distribution - N/A, Weight Distribution Tongue Weight - N/A.
  • Loaded Ball Mount: Receiver Size: 2" Receiver Tube, Towing Specifications: Gross Trailer Weight - 3500 lbs, Tongue Weight - 350 lbs, Trailer Ball Diameter - 1.875, 2" Drop For Trailer Leveling, Length" 8 1/4.
Check Stock

CURT 114183 Class 1 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Mazda CX-3

  • DEPENDABLE STRENGTH. With a strong, welded steel build, this class 2 hitch package is rated for 3,500 lbs. gross trailer weight and 300 lbs. tongue weight (limited to lowest-rated towing component).
  • HIGHLY VERSATILE. Add useful, versatile towing options to your vehicle with this class 2 trailer hitch. It provides a standard 1-1/4-inch x 1-1/4-inch receiver hitch, allowing you to tow a small trailer or mount a cargo carrier or bike rack.
  • DUAL-COAT FINISH. For industry-leading rust, chip and UV resistance inside and out, this automotive tow hitch is submersed in a liquid A-coat and co-cured with a durable black powder coat finish.
  • EASY INSTALLATION. This class 2 hitch fits select model years of the Lexus ES300 or ES330 and Toyota Avalon, Camry or Solara.
  • TESTED FOR SAFETY. Each CURT class 2 trailer hitch design is thoroughly tested at our Detroit facility, using real vehicles in real-world conditions. Our hitches are tested to SAE J684 specs to give you confidence and safety on the road ahead.
Check Stock