ReviewsTrack Roller Bushing

(6) Garage Door 2\ Nylon Rollers w/Cap 7\ Stem 13 Ball Bearing Heavy Duty by The ROP Shop

(Pack of 2) Replacement Garage Door Nylon Roller.
Specs - Roller Diameter: 1 13/16" for a 2" track. Stem Length: 4" (3.75" from bevel). Stem Diameter: 7/16". Single Load: 75 lbs. Ball Bearings: 13. Roller Material: Nylon. Roller Color: White. Refer to images 2 & 3 for more information.
Includes - (2) Sealed Nylon Garage Door Rollers.
Rollers are constructed from nylon that is softer and quieter than plastic or metal rollers and smoother than original equipment rollers. Features a reinforced dual-wall bearing cage, sealed precision ball bearing with backside protective dust shield. Plus double plating thickness on stem is designed for max performance and ultra-life weather protection. Garage door roller rated for up to 20,000 cycles on a 12' door.
Installation Tips - Method 1: Slightly bend track at the seam to remove, replace roller and move the door to do the next roller (repeat on other side). Method 2: Remove screws that attach brackets to your door, secure cable before releasing the bottom brackets that are under the cable spring tension, then clamp the cable to the track, slide out old rollers, place new rollers in their place and screw in backers.

Check Stock

CNCMOTOK Heavy Duty Chain Roller Tensioner w/Spring 110cc 125cc 140cc Dirt Pit Pro Dirt Bike 4 wheeler Black

Heavy duty chain roller tensioner with upgraded spring, thicker wire and longer travel.
The bracket use 3.1mm thick metal, stronger built than other tensioners..
Seamless steel bushing brings smooth rotoring and longer life..
15mm inner diameter mounting bushing size, please see photos for detail measurements..
package includs:2 x rollers,1 x bracket, 1 x clip spring, 1 x screw, 1 x washer.

Check Stock

DIYHD 8FT Sliding Hardware Rolling Library Kit(No Ladder), Black

Roller is 10° bent to make it sutable for ladder.
Package's including:Roller*2,Stop*2,4ft track*2,Track connector*1,Track&wall connector*6.

Check Stock

NEWCOMDIGI 8 Pack Inline Skate Wheels, 64mm Skates Replacement Wheels with Bearings, Indoor/Outdoor Roller Skate Wheels, Luggage Wheels Black

✔Premium Material: These roller pulleys are made of super high-rebound PU material, which is wear-resistant and durable. Its high-performance bearings ensure a smooth and safe ride for your experience and comfort..
✔Suitable Size: 64mm diameter, 24mm width, 8mm shaft/inner diameter. You can choose to install with or remove the bushing to your roller skates, depending on your needs..
✔Practical & Convenient: High-tech elastic material makes it easy to move, ideal for indoor daily practice, leisure skating. Convenient and practical to enjoy your skating time to the fullest..
✔Perfect Set: A set of 8 skating wheels that just fits the needs of a pair of roller shoes and fits your needs perfectly. Compatible with inline skates, roller skates and even some luggage..
✔Notes: Only for children 3 to 12 years old, not for riders above 132 LBS or comprehensive cardboard..

Check Stock

DIYHD 20FT Sliding Library Ladder Black Track Kit,Stand Up Tensible Rolling Hardware

Hardware only,Ladder sold seperately.Assembly Required..
Space Saving.Custom made Tensible rollers are able to stand up the ladder when not in use..
BOTTOM rollers are included in the kit.The position and angle to install the bottom roller can be adjusted to your most comfortable and satisfactory. It can even make up for the little shortness of the ladder (just to install the bottom roller lower). You could remove the bottom roller if you think it is dangerous to have rollers on both ends..
Full set hardware kit includes:4FT track with 2 welded bracketsX 5.
Tensible rollerX 2, Bottom roller X 2, Stopper X 2, End cap X 2,Set screws.

Check Stock

maXpeedingrods Front Adjustable Track Bar for Ford F250 F350 Super Duty 1999-2004, Excursion 2000-2005 Panhard Rod for 2-6" Lift Pickups

【Fitment】The track bar fit for Ford F250 F350 Super Duty 2WD/4WD 1999-2004, Excursion 2WD/4WD 2000-2005. Not fit early 1999 models which need a smaller bushing for the track bar to install properly.
【Length Adjustable Range】Approximately 31.2-33.8 inches, for 2-6" lifted trucks. This traction bar allows you to install plus size tires.
【Feature】Adjustable track bar allows for properly centering the axle of your 2 to 6-inch lifted trucks, improving vehicle performance.
【High Quality Made】Steel track rod is precisely machined from strong steel, coated to prevent rust and corrosion.
【Package Contents】1 piece anti-wobble track bar. The instructio is provided. You can download it or contact us for a PDF document..

Check Stock

DIYHD 13.2FT Sliding Library Ladder Black Track Kit,Stand Up Tensible Rolling Hardware,Floor Wheel with Brake

Hardware only,Ladder sold seperately.Assembly Required..
Space Saving.Custom made Tensible rollers are able to stand up the ladder when not in use..
BOTTOM rollers are included in the kit.The position and angle to install the bottom roller can be adjusted to your most comfortable and satisfactory. It can even make up for the little shortness of the ladder (just to install the bottom roller lower). You could remove the bottom roller if you think it is dangerous to have rollers on both ends..
Full set hardware kit includes:39.37" track with 2 welded bracketsX 4.
Tensible rollerX 2, Bottom roller X 2, Stopper X 2, End cap X 2,Set screws.

Check Stock

(RB) Garage Door Roller Wheel/Steel 2\

✅ NOISE REDUCTION - The 6200ZZ 8-ball bearing design greatly reduces friction between roller and shaft when rotating, giving you a quieter experience that you cannot find on old metal rollers..
✅ DURABLE MATERIAL - While the white nylon reduces noise better than plastic and metal, it is duration at the same time. Our rollers can be used for more than 100,000+ cycles under 150 lbs load test..
✅ STANDARD SIZE - As per 6200ZZ standard, our roller follows the standard size. The roller has 4-5/8" (11.75 cm) long shaft, 7/16" (1.11 cm) thick shaft, 1-13/16" (4.6 cm) wheel diameter, 1/2" (1.27 cm) wheel shoulder, and 1/2" (1.27 cm) wheel thickness..
✅ SIMPLE INSTALLATION - You can replace the rollers by slightly bending track at seam to remove and replace old roller with new nylon roller, then moving the door and replace the next roller. You can also replace the rollers by removing screws that attach the brackets to your door, secure the cable before releasing bottom brackets, clamp cable to track, slide out old rollers and slide in new nylon rollers before you screw in brackets again and complete the process..
✅ BONUS WARRENTY SERVICE - If you have any question or issue regarding our product, you can contact us at any time and we will do our best to ....

Check Stock

ZEKOO 12 FT 4 Doors Bypass Barn Door Hardware Four Rollers Style Kit

...bypass, double track can let each barn door silde on each track where you want, they will not have too much overlap between, it can let your openings show maximum display in the same length track, the two barn doors slide independently without affecting each other..
【Why Choice Our Sliding Bypass Hardware】1.Roller Bearing is high purity bearing steel Gcr15, made of reinforced steel and electrophoretic, ring fixed structure and external dust cover, prevent steel ball from leaving the locus and oil leakage, keep roller lifetime lubricated.
Passed the test of opening - closing for 160000 times, wear-resisting, ensure the stability of the move and the wheel's fluency. 2.The rail is Pre-drill 16" apart hole on rail to line up standard studs..
【Heavy duty construction ensures safety】Material thickness up to 1/4 inch (6.3cm) Solid carbon steel (High Standard Q235), multiple high temperature fine electrostatic powder spraying process black frosted, corrosion protection, antirust, anti-scratch. 8.8 grade Self-tapping and roller bolt make our hardware kit can hold two 230lbs doors comfortably. Door Stopper have rubber covered, good buffer effect, and educe the noise.The hanger wheel surface is covered with nylon, slide very quietly..

Check Stock

DIYHD 6.6FT Library Hardware Rustic Black Sliding Ladder Track, kit

Roller is 10° bent to make it sutable for ladder.
Package's including:Roller*2,Stop*2,6.6ft track*1,track&wall connector*5.

Check Stock

Okuma SLV 4/5 Spare Spool

Multi-disk cork and stainless steel drag washers.
Roller bearing allows the drag to Engage in one direction only.
Precision Machined brass bushing drive System.

Check Stock