ReviewsTrack Saw Guide Rail 118

Upgraded 340mm Track Saw Square Right Angle Circular Saw Guide Rail Angle Stop Accessories Compatible with Festool and Makita Guide Rail (Red)

  • The square body was CNC milled from a solid piece of aluminum, nicely machined ,solid, accurate.
  • For precise and reproducible 90 degree cutting in conjunction with the guide rail without any readjustments.
  • Easy to attach and completely self-aligning, quickly fasten on the guide rail using the quick clamping lever.
  • This track saw square guide compatible with festool and makita rail.
  • Upgrade: Equipped with two quick clamping lever, added anti-tip device, and increased the width of the main body to 98mm.
Check Stock

Makita 194368-5 55\ Guide Rail

  • 55" guide rail for use with Makita Plunge Saw models XPS01, XPS02, and SP6000J.
  • Interacts with the saw base and engineered to deliver smooth, dead-on straight or bevel cutting.
  • Alternate use with select routers and circular saws, must use with router guide rail adapter (194579-2) and saw guide rail adapter (196953-0).
Check Stock

HFM 340mm Track Saw Square Right Angle Circular Saw Guide Rail 90 Degree Electric Circular Saw Track Angle Stop Track Saw Square Accessories

  • Body of the square is CNC milled from a solid piece of aluminum, nicely machined, sturdy, accurate.
  • Easy to attach and completely self-aligning, new type of connection clip, stable and safe.
  • Large size with anti-tip feature, overall length 14.2 inch, 6 inch in width, 0.4 inch thick, long contact edge for easy aligning with workpiece edges.
  • Multifuntion, include extra hardware, can be connected with track rail as cutting guide.
  • This track saw square guide compatible with festool and makita rail.
Check Stock

Urban CoCo Women s Printed Tassel Open front Poncho Cape Cardigan Wrap Shawl Series 5-Grey

  • INCLUDES: (2) Guide Rail Connectors and (1) 3mm Allen Key.
  • COMPLETE PACKAGE: Connector kit has everything you need to align and connect a pair of guide rails.
  • EASY TO INSTALL: No instructions required.
  • comes complete with a 3mm allen key and (4) set screws to prevent over-tightening.
  • PREMIUM QUALITY: Made with high quality steel, providing a solid and sturdy joint between rails as you get consistent straight cuts moving the saw....
  • COMPATIBILITY: Connectors are .467” x .235” x 11-3/4” and will work with any track saw guide with a compatible sized slot. Designed with an easy....
Check Stock

Bora WTX Clamp Edge and Straight Cut Guide for Circular Saws | 50 Inch Cutting Length, 543050

  • GET IT STRAIGHT – This rigid aluminum guide rail is a must-have accessory for keeping your cutting on track. Its long 50in length allows you to saw with precision and skill..
  • CONTRACTOR’S COMPANION - This tool is made for use with the Bora WTX Saw Plate (sold separately), and can be conveniently paired with your own circular saws, routers, jig saws, and other power tools..
  • LOCKED IN - The adjustable clamp end slides up and down the saw guide to fit any material being cut, especially sheets of plywood. The locking handle grabs surfaces for a secure edge that won't budge..
  • AS LONG AS YOU NEED – Modular design allows for additional extrusions to be added which can expand the guide up to 100 inches. With the WTX clamping edge, you’ll save time and eliminate waste due to crooked, uneven cuts..
Check Stock

POWERTEC 71358 Guide Rail Connector Set for Festool Makita DeWalt and Triton | Premium Series | Pack of 2

  • INCLUDES: (2) Guide Rail Connectors and (1) 3mm Allen Key.
  • COMPLETE PACKAGE: Connector kit has everything you need to align and connect a pair of guide rails.
  • EASY TO INSTALL: No instructions required.
  • comes complete with a 3mm allen key and (4) set screws to prevent over-tightening.
  • PREMIUM QUALITY: Made with high quality steel, providing a solid and sturdy joint between rails as you get consistent straight cuts moving the saw....
  • COMPATIBILITY: Connectors are .467” x .235” x 11-3/4” and will work with any track saw guide with a compatible sized slot. Designed with an easy....
Check Stock

Travelers Club Top Expandable +50% Capacity Luggage with USB Port Navy Blue 21 Spinner Carry-On

  • INCLUDES: (2) Guide Rail Connectors and (1) 3mm Allen Key.
  • COMPLETE PACKAGE: Connector kit has everything you need to align and connect a pair of guide rails.
  • EASY TO INSTALL: No instructions required.
  • comes complete with a 3mm allen key and (4) set screws to prevent over-tightening.
  • PREMIUM QUALITY: Made with high quality steel, providing a solid and sturdy joint between rails as you get consistent straight cuts moving the saw....
  • COMPATIBILITY: Connectors are .467” x .235” x 11-3/4” and will work with any track saw guide with a compatible sized slot. Designed with an easy....
Check Stock

POWERTEC 71410 Quick Screw Guide Rail Clamp for MFT Table and Guide Rail System, 5-3/8” Capacity x 2-3/8” Throat Depth – 2 Pack

  • INCLUDES: (2) quick screw down Clamps with 5-3/8" Max opening, 2-3/8" Throat depth.
  • PREMIUM DESIGN: features High quality and ergonomic plastic clamp handle grips for quick and comfortable tightening, without the splinters from cheap wood.
  • The steel pressure pads are completed with removable non marring plastic.
  • SUPERIOR CLAMPING FORCE: delivers consistently secure placement and safe Clamp action for a seamless workflow.
  • VERSATILITY: These rail clamps provide a portable clamping option for Festool, Makita, POWERTEC 71572/ 71573 track saw guide rails and similar sized track saw guides, perfect as MFT clamps for your homemade workbench, and fits in some heavy duty T-slots (see image for size).
  • PLEASE NOTE: The clamp ends have a specific profile, see the image for details. They are designed to work with MFT tables, the track saw guides listed and some heavy duty t-tracks with an opening of at least 9/32”. They will not work in universal or ¼” t-track. Please check the size of your t-track to verify that the clamps will work for your application..
Check Stock

DNYSYSJ Chainsaw Rail Mill Guide System Wood Lumber Cutting Sawmill 9FT or 5FT Ladder Wood Fixing Plate Rail Mill Guide

  • 【PARAMETER DETAILS】Aluminum profile: 28x28x910 mm (1.1x1.1x36 inch).
  • 【RAIL MILL GUIDE SYSTEM】This list is a 2.7-meter track suitable for open-plate brackets, which is durable and reliable.
  • 【QUALITY】Six pieces square aluminum profile.
  • Used with chain saw for wood chip cutting.
  • Creates a straight and level first cut along a log..
  • 【APPLICATION】This rail mill guide system is used with chain saw and chainsaws frame for log wood chip cutting..
  • 【Service】All our products are shipped from US warehouses and you can receive quickly. Hanseryshop has a professional customer service team, ready to solve any of your problems at any time.
Check Stock

Kreg ACS2000 Adaptive Cutting System, Saw + Guide Track Kit

  • Premium Home Improvement Tools: The plunge saw and saw guide combine into an adaptive cutting tool.
  • Woodworking Plunge Saw: Left-bladed circular saw has a retracting blade that can start cutting anywhere on materials.
  • Straight Edge Guide: The aluminum saw guide track ensures precise, straight, and splinter-free cuts.
  • Secure Workshop Accessories: The anti-slip strips on the track saw guide secure material without clamps.
  • Kreg Tools: We offer products that help woodworkers close the gap between idea and outcome.
Check Stock

9 FT Rail Mill Guide System 3 Crossbar Kits Work with Chainsaw Mill

  • Size:9-FT rail mill guide system in combination with the saw mill creates a straight and level first cut along a log.
  • Material: aircraft grade aluminum works with saw mill dimensions L x W x H (in.): 108 x 10 x 4.
  • Connector kit: connect any combination of 9 Ft or 5 Ft guide systems together.
  • Please read the assembly instruction carefully before installing.
  • This rail mill guide system is used with chain saw and chainsaws frame for log wood chip cutting.
Check Stock