ReviewsTrafimet Plasma Torch

Drag Shield Hand 60485 Retaining Cup 60389C fit Plasma Cutting IPT-60 PT-60 Torch 6-PKG

  • These plasma cutting torch consumables can use on IPT-60, IPTM-60, PT-60, PTM-60 Series plasma cutting torch.
  • Package including 1pc Retaining Cup + 5pcs Drag Shield.
  • There are 6pcs plasma cutter IPT60 consumables in every package.
  • The plasma cutting current is about 30-60A.
  • They are WS replacement parts, NOT Original plasma consumables kits.
Check Stock

WeldingStop 40pcs SL60 Electrode 9-8215 Tips 9-8211 Nozzle 80A for Thermal Dynamics SL60 SL100 Torch CutMaster 52 82 152 102 Plasma Cutter Consumables

  • ✓CutMaster Cutter—— The plasma cutter spare parts kit are fitting in Thermal Dynamics CutMaster 52 / 82 Plasma Cutter SL60 Plasma Cutting.
  • The plasma consumables also can fit Thermal Dynamics CutMaster 102 / 152 Plasma Cutter with SL100 Plasma Torch.
  • ✓For Use With Torch—— These electrodes and tips are fitting in plasma Torches 2CZF1 and 2CZF2.
  • ✓Package Including—— 20pcs SL60 electrodes 9-8215 and 20pcs SL60 standoff tips 9-8211 80A Nozzle WS OEMed.
  • ✓Plasma Cutting Current—— These plasma consumables can be uesd within 80A plasma cutting.
  • ✓Replacement Parts—— These electrodes and tips are replacement parts that made by WeldingStop, and not original.
Check Stock

WeldingStop 9-0093 9-0096 Plasma Electrode Tip for Thermal Dynamics CutMaster 42 Cutter SL40 Torch PK-40

  • These plasma electrodes and tips can fit Thermal Dynamics CutMaster 42 Cutter and SL40 Plasma Cutting Torch.
  • There are total 40pcs of plasma cutting SL40 torch conusables in the package.
  • The plasma electrodes and tips are replacement parts, NOT Thermal Dynamics Original plasma consumables.
Check Stock

WeldingStop PT-60 IPT-60 Retaining Cap 60389C Drag Shield 60485 Electrode Plasma Contact Cutting Consumables PKG/46

  • These plasma cutting torch consumables can use on IPT-60, IPTM-60, PT-60, PTM-60 Series plasma cutting torch.
  • Package including 20pcs Electrodes + Tips and 1pc Retaining Cup + 5pcs Drag Shield.
  • There are 46pcs plasma cutter IPT60 consumables in every package.
  • The diameter of tips are 0.9mm or 0.035 inches, plasma cutting current is about 30-40A.
  • They are WS replacement parts, NOT Original plasma consumables kits.
Check Stock

WeldingStop 0.9mm Contact Tip IPT-60 PT-60 electrode drag shield retaining cup 30-40A plasma cutting nozzle 23pcs

  • These plasma cutting torch consumables can use on IPT-60, IPTM-60, PT-60, PTM-60 Series plasma cutting torch.
  • Package including 10pcs Electrodes + Tips and 1pc Retaining Cup + 2pcs Drag Shield.
  • There are 23pcs plasma cutter IPT60 consumables in every package.
  • The diameter of tips are 0.9mm or 0.035 inches, plasma cutting current is about 30-40A.
  • They are WS replacement parts, NOT Original plasma consumables kits.
Check Stock

WeldingStop 9-0096 9-0093 Plasma SL40 torch for Thermal Dynamics CutMaster 42 Cutter 20pcs

  • Suitable for Thermal Dynamics CutMaster 42 Plasma Cutter (Ref. 1-4200) SL40 Torch (Ref. Code 7-0040).
  • 10 pieces x 9-0096 Plasma Cutting Electrode (NOT Thermal Dynamics 9-0096 Original).
  • 10 pieces x 9-0093 Plasma Cutting 40A Drag Tip (NOT Thermal Dynamics 9-0093 Original).
  • Nozzle Style: 40A Cutmaster 42 plasma drag tip.
  • These electrodes and tips are replacement parts which can be fit in SL40 torch, and these cutmaster 42 consumables are made by WS, not original.
Check Stock

hynade CNC Blow Back Digital Air Plasma Cutter, Non-HF Pilot Arc Non-Touch Plasma Cutting Machine, THC Torch Height Control Enabled (CUT60DN)

  • Dual voltage plasma cutter :This is a 110/220V Non-HF Blow Back Pilot Arc Plasma Cutter, Input Power AC110/220V±15%,AC110/220V 55A cutting current with 60% duty cycle, 220V 55Amps 110V 35Amps Cutting Current.The working power range from 100V to 250V, Under 220V Pilot arc will not reliable if the voltage lower than 190V. Under 110V, the pilot arc will not reliable if the voltage lower than 100V.
  • Plasma cutter cutting thickness: Max Cutting Thickness 25mm@55A 220V 70PSI, Clean cutting thickness 20mm@55A 220V 70PSI, 12mm Clean Cutting thickness under 110V 60PSI. 63A power break, 45L/min Air compressor is suggested.
  • 2T/4T Function :Plasma cutting machine CUT60DN with 2T/4T function, also with Air/Cut Function, 2T 4T easy let the user operate machine and it is great help for the CNC cutting table. THC torch height control enabled. machine with function for torch protection, The LED light up if the torch connecting is not well, It will also lighting up while replacing the torch consumables,machine is not able to work while it lighting up.
  • CNC Plasma Cutting Machine : have 2 pins and 4 pins connecting port at rear of machine. 2 pins connector for The arc voltage output ratio 1:1, 4 pins connector for Signal Control.Easy works with CNC cutting table.The plasma....
Check Stock

Reboot Plasma Cutter 45 Amp IGBT Inverter RBC4500 AC 220V Air Plasma Cutting 1/2 Clean Cut 15MM Max Cutting High-Frequency Duty Cycle for Aluminum Stainless Mild Steel Copper Iron

  • [Cutting Thickness] Plasma Cutter 20-45A DC output: 1/2” ideal clean cutting and 3/4” severance cutting under 220/240V,air pressure 60PSI....
  • [Blowing Back] Plasma cutting Torch Pre-made 3 seconds of blowing time after you release the torch,to cool down the torch head and....
  • [Generator Supported] this plasma cutter 45amp works well with a generator,but we suggest a 5000W above generator and 30A breaker needed for 220V.
  • [Wildely Application and Low Cost] this plasma cutter available for cutting most metals: stainless steel,alloy,aluminum,mild steel,carbon steel.
  • [Warranty] buy this plasma cutter with confidence as Reboot offers 1-year limited warranty and free consumables guarantee,besides,you will get a local....
Check Stock

Lotos CL133 Plasma Cutting Torch 3 Prong Switch Connector for Red Color LT5000D, LT3500, LT3200 and BROWN Color LT3500 13 ft

  • Standard length 13Ft long plasma cutting torch.
  • LOTOS DESIGNED Torch is made specifically for RED Color Lotos plasma cutter LT5000D, LT3500, LT3200 and BROWN Color LT3500..
  • NOT Compatible with BROWN Color Lotos LT5000D..
  • Included consumables comes with one set of consumables (1 nozzle, 1 electrode, 1 ring, 1 cup) installed on torch head.
  • Machine attachment 3 prong end connector ready to be connected to your lotos plasma cutter.
Check Stock

PrimeWeld Plasma Cutting Table with Replaceable Slats, Plasma Cutter Table, Cutting Equipment, 32" H x 21" W x 30" L

  • Plasma Cutting Solution - The PrimeWeld Plasma Cutting Table offers you an industrial solution to a problem that most face when trying to cut material with their plasma cutter or gas torch. Using this table you can lay your workpiece over the support slats and make cuts with your plasma cutter or gas torch and not worry about what to use to support the back side of the material..
  • Sturdy, Carbon Steel Construction - The 250 pound capacity allows you to plasma cut or weld heavy plate steel. As an extra safety feature, the slag catch tray helps you to not worry about pieces falling to the floor..
  • Work At The Right Height - This slatted-top, steel cutting table is the place to support your workpiece while plasma cutting or welding. The dimensions are 32"H x 21"W x 30" L and are designed to let you cut and work at the perfect height..
  • Replaceable Slats - The PrimeWeld Plasma Cutting Table comes with 23 replaceable slats. The slat support spacing allows arcs and sparks from your welder or plasma cutter to penetrate the steel..
Check Stock

ARCFONY Plasma Cutter Welder Machine - 50Amp CTS528XP Non-Touch Pilot Arc Plasma Cutter, 3 in 1 200Amp TIG MMA Welders, Dual Voltage 110V/220V

  • Non-Touch Pilot Arc: 50Amp plasma cutter, pilot arc technology allows you to cut without touching the tip of the metal, effectively cutting rough, painted and rusty surfaces, producing minimum slag, maximum cutting thickness of 14mm, ideal cutting thickness of 10mm..
  • TIG & MMA Mode: 200Amp tig welder machine adopts HF arc ignition technology and has the functions of HF TIG, spot TIG and pulse TIG. The welding has little damage to the base metal and can weld thin process parts. 180Amp MMA adjustable arc current, arc welding stability. Suitable for 1.0mm to 4.0mm different acid base electrode welding..
  • Easy To Use: Plasma Cutter machine adopts IGBT inverter technology, 110/220V dual voltage automatic recognition of input current and voltage. Plasma Cutter equipped with NPT 1/4 "air regular, Duty cycle is 60%. Built-in post time, when you stop cutting, the air runs for a minute to cool the consumables of the plasma cutting torch and extending the life of consumables..
  • Safe & Portable: Built-in overload protection and fan cooling system. When the output current and machine temperature exceed the set standard, the p....
Check Stock