ReviewsTrailer Ball Mount

CURT 45141 Trailer Hitch Mount 2-Inch Ball Lock Fits 2-In Receiver 7,500 lbs 2 Drop Black

  • DEPENDABLE STRENGTH. Rated to tow 7,500 pounds gross trailer weight and 750 pounds tongue weight, this ball hitch offers dependability for your towing setup. It is constructed from welded steel and has a hollow shank.
  • VERSATILE USE. This trailer hitch ball mount comes with a 2-inch shank to fit virtually any industry-standard 2-inch receiver. The ball mount has a 2-inch drop, 2-inch diameter ball, 5/8-inch hitch pin hole and 7-1/2-inch overall length.
  • READY TO TOW. Hitching up your trailer is easy with this ready-to-use trailer hitch ball mount. It comes with a welded tow ball for ready coupling and a trailer hitch lock to securely mount onto your hitch receiver and deter theft.
  • CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable black powder coat finish, and the trailer ball has a polished chrome plating. These finishes resist damage from rain, dirt, road salt and other corrosive threats.
  • EASY TO INSTALL. To install the trailer hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The rounded shank makes installation easy.
Check Stock

Sulythw Trailer Hitch Ball Mount, Towing Hitches with 2 Inch Ball, 7,500 lbs Trailer Hitch Receiver Standard Class Ⅲ, 2\ Drop and 1/2\ Rise

  • Which Ball Mount Do I Need? First determine if you need an Hitch Drop or Rise, the size of your Trailer Hitch Receiver, and last, the weight capacity of the gross trailer. Our Ball Mount has a 2 inch drop, fits 2-in Receiver and 7,500 lbs, with a 2 inch ball. Confirm these figures and you'll find a suitable Trailer Hitch Ball Mount..
  • Trailer Hitch Rated to tow 7500 pounds gross trailer weight and 750 pounds tongue weight. Ball is stamped the suggested 5000 pounds..
  • Ball mount has a 2 inch drop, 2 inch diameter ball, 0.7 inch pin hole..
  • 2 inch hitch ball, an excellent choice for towing most small boat trailers, utility trailers, pop up campers and some recreational vehicle trailers used for hauling dirt bikes, motorcycles and ATVs (NOTE: Do not exceed the maximum load capacity of 7500lb for any towing component.
  • Ball hitch offers dependability for your towing setup, engineering strong steel and precise welding, our trailer hitch extenders receive a gloss black powder coat for ongoing prevention of rust, corrosion..
  • Simple Installation: There is a pre-attached tow ball for ready coupling, and a trailer hitch pin to securely mount onto your hitch receiver..
Check Stock

CURT 45002 Multi-Ball Trailer Hitch Ball Mount, 2, 2-5/16-Inch Balls, Fits 2-Inch Receiver, 10,000 lbs

  • HIGHLY VERSATILE. This trailer hitch ball mount features 2 welded trailer balls on a single shank to accommodate a wide variety trailers. It's perfect for multiple trailer owners! Simply turn the ball mount to the ball size needed.
  • DEPENDABLE STRENGTH. The 2-inch ball is rated for 7,500 lbs. gross trailer weight / 750 lbs. tongue weight, and the2-5/16-inch ball is rated for 10,000 lbs. gross trailer weight / 1,000 lbs. tongue weight (limited to lowest-rated towing component).
  • SECURE TOWING. Hitching up your trailer is easy with this ready-to-use trailer hitch ball mount. It comes with welded tow balls for ready coupling to your trailer. Because the welded hitch balls are permanently attached, they can never be loosened.
  • CORROSION-RESISTANT. For long-lasting use, this ball hitch shank is protected with a durable black powder coat finish, and the trailer balls have a polished chrome plating.
  • EASY TO INSTALL. This multi-ball mount has a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver. To install it on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver.
Check Stock

CURT 45001 Multi-Ball Trailer Hitch Ball Mount 1-7/8 2 2-5/16-Inch Balls Fits 2-Inch Receiver 10,000 lbs

  • DEPENDABLE STRENGTH. Rated to tow 7,500 pounds gross trailer weight and 750 pounds tongue weight, this ball hitch offers dependability for your towing....
  • VERSATILE USE. This trailer hitch ball mount comes with a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver. The ball mount....
  • READY TO TOW. Hitching up your trailer is easy with this ready-to-use trailer hitch ball mount. It comes with a pre-attached tow ball for ready....
  • CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable black powder coat finish, and the trailer ball has a polished....
  • EASY TO INSTALL. To install the trailer hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The....
Check Stock

Goreks 2-Way Trailer Ball Mount 2 Inch & 2-5/16-Inch Balls Multi Use for Towing, Coupling, and Hitching Up Your Vehicle, Use with 2” X 2” Receiver

  • This multi-ball hitch mount design enables fast and easy switching between ball sizes without the need to install or own an entirely different ball mount. In addition, no need of removing a hitch ball and reloading a new one is needed. The trailer hitch ball mount features two welded trailer balls accommodating a wide variety of trailers, perfect for owners with multiple trailers..
  • Dependable strength: The 2-inch ball is rated to tow 6000 lbs. gross trailer weight / 600 lbs. Tongue weight, and the 2-5/16-inch ball is rated for 10,000 lbs. Gross trailer weight / 600 lbs. tongue weight.
  • VERSATILE CAPACITY: The double ball mount has an option of two ball sizes to Choose from including 2 inch and 2-5/16 inch depending on your needs simply rotate to the desired hitch ball. The hitch easily connects your trailer to your vehicle for hassle free hauling and easy operation..
  • SECURE TOWING: With a capacity range of 6,000 lbs. on the 2-inch ball and 10,000 lbs. on the 2-5/16-inch ball the 2-way ball mount is the most convenient, versatile, and easy to use hitch ball mount for your hauling applications. The two-way ball mount is pre-attached with a welded trailer ball making it easy to operate and ready for towing right out of the package..
Check Stock

CURT 45064 Lifted Truck Trailer Hitch Mount with 2-Inch Ball & Pin, Fits 2-in Receiver, 7,500 lbs, 6-Inch Drop, Black

  • DEPENDABLE STRENGTH. Rated to tow 7,500 pounds gross trailer weight and 750 pounds tongue weight, this ball hitch offers dependability for your towing setup. It is constructed from welded steel and has a hollow shank.
  • VERSATILE USE. This ball mount has a 2-inch x 2-inch shank and a 6-inch drop, making it great for larger, lifted trucks and Jeeps. It also features a 2-inch diameter ball, 5/8-inch pin hole and 9-1/4-inch overall length.
  • READY TO TOW. Hitching up your trailer is easy with this ready-to-use trailer hitch ball mount. It comes with a pre-attached tow ball for ready coupling and a trailer hitch pin to securely mount onto your hitch receiver.
  • CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable black powder coat finish, and the trailer ball has a polished chrome plating.
  • EASY TO INSTALL. To install the trailer hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The rounded shank, included hitch pin and pre-torqued trailer ball make installation easy.
Check Stock

CURT 45810 Trailer Hitch Ball Mount, 2-Inch Receivers, 7,500 lbs, 1-Inch Hole, 2-in Drop

  • HIGHLY VERSATILE. This multi-use trailer hitch ball mount equips your vehicle with two towing options: a 1-inch hole to accept a trailer hitch ball and an extra 2-inch x 2-inch receiver (trailer ball sold separately).
  • DEPENDABLE STRENGTH. This ball hitch is constructed from high-strength steel and the trailer ball tongue is rated to tow up to 7,500 pounds gross trailer weight and 750 pounds tongue weight (limited to lowest-rated towing component).
  • READY TO TOW. Hitching up your trailer is easy with this 2-inch ball mount. It has a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver. The ball mount also has a 2-inch drop to promote level towing.
  • CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable powder coat finish, easily resisting damage from rain, dirt, snow, road salt and other corrosive threats.
  • EASY TO INSTALL. To install this class 3 hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The rounded shank makes installation easy. Then, secure the shank with a hitch pin (sold separately).
Check Stock

CURT 45675 Multi-Ball Trailer Hitch Ball Mount, 1-7/8, 2, 2-5/16-Inch Balls and Tow Hook, Fits 2-Inch Receiver, 10,000 lbs

  • HIGHLY VERSATILE. This trailer hitch ball mount features 3 welded trailer balls on a single shank to accommodate a wide variety trailers. It's perfect for multiple trailer owners! Simply turn the ball mount to the ball size needed.
  • DEPENDABLE STRENGTH. The 1-7/8-inch ball is rated for 3,500 lbs. GTW / 350 lbs. TW, the 2-inch ball 5,000 lbs. GTW / 500 lbs. TW, and the 2-5/16-inch ball 10,000 lbs. GTW / 1,000 lbs. TW (limited to lowest-rated towing component).
  • SECURE TOWING. Hitching up your trailer is easy with this ready-to-use trailer hitch ball mount. It comes with welded tow balls for ready coupling to your trailer. Because the welded hitch balls are permanently attached, they can never be loosened.
  • CORROSION-RESISTANT. For long-lasting use, this ball hitch shank is protected with a durable black powder coat finish, and the trailer balls have a polished chrome plating.
  • EASY TO INSTALL. This multi-ball mount has a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver. To install it on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver.
Check Stock

CURT 45065 Lifted Truck Trailer Hitch Mount with 2-5/16-Inch Ball & Pin, Fits 2-Inch Receiver, 7,500 lbs, 6-Inch Drop, GLOSS BLACK POWDER COAT

  • DEPENDABLE STRENGTH. Rated to tow 7,500 pounds gross trailer weight and 750 pounds tongue weight, this ball hitch offers dependability for your towing setup. It is constructed from welded steel and has a hollow shank.
  • VERSATILE USE. This ball mount has a 2-inch x 2-inch shank and a 6-inch drop, making it great for larger, lifted trucks and Jeeps. It also features a 2-5/16-inch diameter ball, 5/8-inch pin hole and 9-1/4-inch overall length.
  • READY TO TOW. Hitching up your trailer is easy with this ready-to-use trailer hitch ball mount. It comes with a pre-attached tow ball for ready coupling and a trailer hitch pin to securely mount onto your hitch receiver.
  • CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable black powder coat finish, and the trailer ball has a polished chrome plating.
  • EASY TO INSTALL. To install the trailer hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The rounded shank, included hitch pin and pre-torqued trailer ball make installation easy.
Check Stock

CURT 45360 Aluminum Trailer Hitch Ball Mount, Fits 2-Inch Receiver, 8,000 lbs, 1-Inch Hole, 2-in Drop, 1-in Rise, Black

  • CORROSION-RESISTANT. For long-lasting reliability, this ball hitch is constructed from solid aluminum and is naturally resilient to the elements, resisting damage from rain, dirt, snow, road salt and other corrosive threats.
  • DEPENDABLE STRENGTH. This aluminum trailer hitch ball mount is rated to tow up to 8,000 pounds gross trailer weight and 800 pounds tongue weight (limited to lowest-rated towing component).
  • VERSATILE USE. This aluminum hitch ball mount comes with a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver. The ball mount also has a 2-inch drop and 1-inch rise to promote level towing.
  • TOW BALL REQUIRED. Hitching up your trailer is easy with this 2-inch ball mount. It features a 1-inch hole to accept a trailer hitch ball with a 1-inch diameter shank (trailer ball torque should not exceed 250 lb-ft.
  • EASY TO INSTALL. To install this class 3 hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The rounded shank makes installation easy. Then, secure the shank with a hitch pin (sold separately).
Check Stock

CURT 45362 Aluminum Trailer Hitch Ball Mount, Fits 2-Inch Receiver, 8,000 lbs, 1-Inch Hole, 6-in Drop, 5-in Rise, Black

  • CORROSION-RESISTANT. For long-lasting reliability, this ball hitch is constructed from solid aluminum and is naturally resilient to the elements, resisting damage from rain, dirt, snow, road salt and other corrosive threats.
  • DEPENDABLE STRENGTH. This aluminum trailer hitch ball mount is rated to tow up to 8,000 pounds gross trailer weight and 800 pounds tongue weight (limited to lowest-rated towing component).
  • VERSATILE USE. This aluminum hitch ball mount comes with a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver. The ball mount also has a 6-inch drop and 5-inch rise to promote level towing.
  • TOW BALL REQUIRED. Hitching up your trailer is easy with this 2-inch ball mount. It features a 1-inch hole to accept a trailer hitch ball with a 1-inch diameter shank (trailer ball torque should not exceed 250 lb-ft.
  • EASY TO INSTALL. To install this class 3 hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The rounded shank makes installation easy. Then, secure the shank with a hitch pin (sold separately).
Check Stock