ReviewsTrailer Dock Bumper

Sav-A-Dock Patented Protection Bumper System, Boat Dock Shielding, 8 and 4 Foot Horizontal and 4 Foot Vertical Configurations, Hardware Kit Included, Protection Guaranteed (Black, 8 Foot Horizontal)

  • HAPPY, DAMAGE-FREE LAKE LIFE: Tired of your boat bouncing against that wood and other materials? Tired of stringing buoys off the side of the boat? Ensure it is protected with the patented Sav-A-Dock protection unit..
  • WHAT'S IN THE BOX: 8 or 4 foot Horizontal or 4-foot Vertical sleeve, foam cylinders, hardware mounting kit, and easy-to-follow installation instructions. Our patented bumper system is anchored securely to the edge, making sure your dock does not become unprotected in rough waters..
  • EASY DIY INSTALLATION: Install and relax while your boat and dock are taken care of for years to come. Our protection units are aligned parallel with the dock and horizontally allowing for maximum coverage..
  • 100% PROTECTION: The horizontally and vertically aligned buoys allows for the bumper system to protect every inch! No more do you have to worry about buoys popping up and over the dock. Save time and money with a Sav-A-Dock shielding system..
Check Stock

OEDRO Rear Bumper Compatible with 2018-2022 Jeep Wrangler JL & Unlimited JLU (2/4 Doors), Full Width Back Bumper w/ D-Rings & Hitch Receiver & Reflective Armor

  • 【Perfect Fitment】OEDRO rear bumper combo is compatible with 2018-2022 Jeep Wrangler JL & Unlimited JLU (2/4 Doors) all models.Rear parking sensor, require self-drilling..
  • 【Separated Trailer Hitch】Unlike other rear bumpers, this bumper designed with separated trailer hitch. You can reuse the factory trailer hitch or select higher grade hitch. Special harness plug notch for easy and clean wire routing..
  • 【Stainless Steel Trim Panel】The original silver trim panel can reflect lights, adding extra safety during the night. Or it can be easily removed for customized painting, matching the body color or individuation decal..
  • 【Functional Step Bumper】This back bumper has enough space for a spare tire up to a 32-inch one. Also, it will serve both as a guardrail and anti-slip step pad..
  • 【Tactical 67" Full Length Bumper】Adding an aggressive style to the rear of your Jeep with protection from all the hazards of driving a Jeep the way it was meant to. Hit the trails with confidence and with a bold new look..
Check Stock

Bolt-on RV Bumper Hitch Receiver Adapter Fits 3-4" Beam, 2" Receiver, Trailer Accessories Best for Mounting Bike Racks & Cargo Carriers

  • Upgrade the Patented design : Depending on the different width of the steel beam and the gap of the adapter, these two bolts have the adjustment function, can lock the steel beam, without shaking！ Patented products, please do not imitate !!.
  • VERSATILE DESIGN: The RV Camper bumper hitch 2 in receiver are designed to fits travel trailer 2-3-4-4.5" bumper beam, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more. Sturdy carbon steel construction is a durable, corrosion-resistant and long-lasting solution to all your trailer needs..
  • 200LBS TONGUE WEIGHT CAPACITY: The Bumper Hitch has a 200lbs tongue weight capacity that you can rely on (Note: It is NOT intended for towing purposes)..
  • EASY TO INSTALL: Installation of this RV camper trailer hitch is fast and easy. It securely bolts onto virtually any 2"-4.5" RV bumper with the included hardware and typically just a few tools..
  • PACKAGE: Camper RV bumper hitch, 4 bolts included for Mounting hardware..
Check Stock

ROBLOCK Camper Wheel Chocks 2 Pack Ideal RV Chocks with Non-Slip Strip and 1 Trailer Jack Wheel Dock for Travel Trailer Truck and SUV

  • High-Performance Use: Wheel chocks are used with the wheel dock to prevent wheel slip more effectively. Suitable for fixing various types of RVs, travel trailers and cars. The wheel chock can be used to stabilize the wheels and keep the wheels in place. The wheel dock can effectively fix the trailer wheel to ensure the safety of the parking.
  • Added Value: Trailer wheel dock at the proper position of the wheel to fix the car and prevent it from sliding and help prevent your jack from sinking into soft foundations such as mud, sand, mud, gravel, grass, etc.
  • Chock Details: The size of the two wheel chocks is 8.19" x 4.72" x 4.33" and the weight is 0.77 pounds. The size of a trailer jack is 8.03" x 8.03" x 1.38" and the weight is 0.49 pounds. And a storage belt, making it more convenient to carry. The clear yellow design provides chock visibility.
  • Preferred Material: Made of sturdy and not-ultraviolet and anti-oxidation polypropylene, with strong resistance to pressure, waterproof, wear-resistant, and odorless, rubber pads are fixed at the bottom of the wheel chocks, which can maximize the grip and increase traction.
  • Easy to Use: The triangular design allows the chock to be easily placed against the wheel and prevent it from sliding used as truck chocks, camp....
Check Stock

CURT 19030 Step Bumper Hitch Receiver, 2-Inch, 5,000 lbs.

  • EASY TO INSTALL. This bumper hitch can be used on a wide variety of trucks and SUVs, featuring slotted mounting holes spaced 8-1/2 inches apart, on-center. This trailer hitch receiver is designed to bolt onto the bottom of the truck's step bumper.
  • DEPENDABLE STRENGTH. This step bumper hitch is rated for 5,000 lbs. gross trailer weight and 500 lbs. tongue weight (limited to lowest-rated towing component).
  • VERSATILE DESIGN. For a wide variety of towing options, this bumper hitch receiver equips your truck with a standard 2-inch x 2-inch hitch receiver. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more.
  • FULLY TESTED. This bumper mount hitch design is tested at our Detroit engineering facility according to SAE J684 standards for the utmost safety and reliability while towing.
  • RUST, CHIP, UV-RESISTANT. This hitch bumper receiver is protected with a dual-coat finish of rust-resistant A-coat and highly durable black powder coat. The two finishes are co-cured for exceptional resistance to rust, chipping and UV rays.
Check Stock

Shocker Air Hitch with Combo Ball Mount (2' & 2-5/16' Balls), Fits 2' Hitch - 12,000 lbs

  • The Shocker Air Hitch has a capacity of 12,000 lbs of towing, 1,200 lbs tongue weight. Fits into bumper receiver hitch. The air bag sits under receiver tube. Adjust the air pressure for the best ride and load control. Easy to attached and adjust. 5lbs of air pressure per 100 lbs on tongue weight.
  • 7 Adjustment Holes - 1/2" to 3-1/2" drop. Includes Combo Hitch Balls - 2" and 2 5/16" - Just flip ball mount around when pulling trailers with different coupler ball sizes..
  • Add Instant Air Ride to your Pickup & Trailer. Smoother Safer Towing - Takes the Jerks, Bumps and Thumps away from your vehicles & your trailer. built-in air bag for a smoother towing experience. Featuring a built in height adjustment plus weight adjustable. Just add or ride air depending on the weight of your trailer and it's contents..
  • Built in airbag cushions your trailer towing for a smoother tow. Works great on compact, midsize and full size pickup trucks along with vans and select SUV's when the receiver tube is mounted under the bumper.
  • Choose 2" or 2-1/2". Includes complete Shocker air bumper hitch base frame assembly with built in airbag, adjustable combo ball mount (2" & 2-5/16" ball) along with 2 D-handle ball mount pins & clips. Made in the USA by Shocker Hitch.
Check Stock

Vestil V-1124-6 Rubber Vertical Laminated Dock Bumper, 24\ Length, 11\ Width, 6\ Depth

  • Vertical loading dock bumper for preventing damage by a vehicle to dock or building.
  • 6" rubber padding for elasticity and resistance to impact.
  • Fabric-reinforced for strength and dimensional stability.
  • Steel mounting and tie rods for strength and durability.
  • Welds to dock or bolts to dock for easy installation.
Check Stock

Dock N Stow Set of 2 Wheel Chocks, Great for RV, Boat, Utility, Cargo, Travel Trailers, Replacement Chocks Without Rope for Use with GEN 1 and GEN 2 Blocks, Helps Keep Trailer in Place, Made in USA

  • Made in the USA - This set of two wheel chocks were proudly made in Denver, Colorado, USA..
  • Durable and Built to Last - made of hard, plastic with UV inhibitors..
  • Our wheel chocks integrate into a Dock N Stow GEN 1 or GEN 2 block. If you have purchased a Dock N Stow trailer jack stand by itself, these wheel chocks integrate into the bottom of the block and will ride on the trailer frame next to the block..
  • Helps Keep your Trailer in Place - Each measure 7 inches in length and accommodate most trailer wheels.
  • Convenient T handle on back of the chock allows for easy chock removal..
Check Stock

TLAPS 7422440694619 For 2007-2018 Chevy Silverado/GMC Sierra 1500 Class 3 III Black 2\ Trailer Hitch Receiver With 2 Inch Drop Loaded Ball Mount

  • Application: For 2007-2018 Chevy Silverado 1500 New Body Style Models, 2019 Chevy Silverado 1500 LD All Models, 2007-2018 GMC Sierra 1500 New Body Style Models, 2019 GMC Sierra 1500 Limited All Models ( Attention Note: Will Not Fit 2007-2018 Models With Roll Pan Bumper / Tommy Gate Lift / 10 Inch Drop Bumper, Will Not Fit 2007 Classic Models, Will Not Fit 2500 HD / 3500 HD Heavyduty Models ).
  • Trailer Hitch + Loaded Ball Mount ( Trailer Ball, Pin & Clip Are Included ).
  • Hitch Class: Class 3, Receiver Size: 2" Receiver Tube, Towing Specifications: Weight Carrying Capacity - 6000 lbs, Tongue Weight - 600 lbs, Weight Distribution - 10000 lbs, Weight Distribution Tongue Weight - 1000 lbs.
  • Loaded Ball Mount: Receiver Size: 2" Receiver Tube, Towing Specifications: Gross Trailer Weight - 3500 lbs, Tongue Weight - 350 lbs, Trailer Ball Diameter - 1.875, 2" Drop For Trailer Leveling, Length" 8 1/4.
Check Stock

Vestil Rubber Specialty Molded Dock Bumper, T-Shaped, 22\ Length, 22\ Width, 3\ Depth

  • Horizontal loading dock bumper for preventing damage by a vehicle to dock or building.
  • 6" rubber padding for elasticity and resistance to impact.
  • Fabric-reinforced for strength and dimensional stability.
  • Steel mounting and tie rods for strength and durability.
  • Welds to dock or bolts to dock for easy installation.
Check Stock

Vestil V-1120-4.5 Rubber Vertical Laminated Dock Bumper, 11\ Width, 20\ Height, 4.5\ Depth

  • Vertical loading dock bumper for preventing damage by a vehicle to dock or building.
  • 4-1/2" rubber padding for elasticity and resistance to impact.
  • Fabric-reinforced for strength and dimensional stability.
  • Steel mounting and tie rods for strength and durability.
  • Welds to dock or bolts to dock for easy installation.
Check Stock