Southwest Wheel Pair of Square Trailer Fenders (14'-16' Wheels) …
- Pair of Square Single Axle Trailer Fenders (14"-16" wheel).
ReviewsTrailer Fenders
Nilight 2PCS LED Trailer Fender Lights Pre Wired Trailer Clearance Marker Lights Amber Front Red Rear for Trailer Trucks,2 Years Warranty
- Main Purpose: Designed in dual faces mounted on the top of fenders, work as both front and rear clearance marker lights, easily help you and other drivers behind identify the widest point of trailer, ensuring a safer drive & better protection.
- High Visibility Light: Both left and right fend light use 14PCS led diodes, 7PCS for amber light at front and 7PCS for red lights at rear, output highly visible marker light for your enclosed trailer.
- Simple & Tidy Installation: Lights are pre-wired with connectors and designed with extended bracket housing, offer you a quick wire connection and convenient and tidy wire routing, protecting it from exposure and damages.
- Wires Connection: Comes with about 7” wire lead, wire gauge 22AWG, black wire with ring terminal to ground,red wire to 12V positive tail light wire.
- Application: Can be widely used on 12V trailer trucks, freightliner, emergency vehicles and service vehicles etc.
Malone MicroSport XT Trailer
- Upgraded version of Malone's popular MicroSport Base Trailer includes three top-selling accessories at reduced bundle price.
- Custom 12-inch aluminum spoke wheels and diamond plate aluminum fenders.
- removable and retractable tongue for easy storage.
- DOT-approved lighting and bearings, pre-tested electrical system, pre-fitted chassis components, and 65-inch coated steel load bars.
- Includes limited five-year manufacturer's warranty.
Partsam 10Pcs 3/4" Round Amber Trailer Led Marker lights 3 wire Turn Signal Light Clearance Lights Grommet Mount for Trailer Truck Fender Marker Lights Sealed
- Partsam ( 10 x Amber ) 3/4" Side Marker light Grommet Mount Single Led, Install them on the front or rear of your vehicle as side marker lights, clearance lights, auxiliary turn signals or supplemental brake lights.
- 3/4" round, Amber lens LED lamp for use as a combination turn signal and running lamp, for use with Poison Spyder fenders or anywhere you'd like to mount them by drilling a 3/4" hole in a flat panel. This is a 3-WIRE assembly, meaning it can be used as both a turn signal AND a marker lamp simultaneously. It can also be used as only a marker lamp (or only a turn signal) by using two wires and leaving the third wire unused. includes pigtail harness and mounting grommet for use on your vehicle.
- Universal for most 12V vehicles. Perfect for Trailer, Truck, Car, Bus, Pickup, ATV, UTV, Van, Semi-trailer, Camper, RV, Boat Trailer, SUV, Caravan, Cabin Cars, Lorry, etc.
- EASY TO INSTALL - 3 Wire Connections: Black is Negative, Red+Black - high brightness, White+Black - low brightness.Outer Diameter: 26mm (1.02'').
- Package include:10x Amber 3/4" Side Marker Light. 1 Years Warranty Guarantee, Feel free contact us for any question.
Rust-Oleum 253438 Truck Bed Coating Spray, 15 Ounce (Pack of 6), Tan
- Ideal for use on truck beds, trailer floors, fenders and other metal surfaces.
- Stops Rust formula provides long lasting protection with any-angle spray comfort tip that reduces finger fatigue and makes it easy to reach hard to paint places.
- Dries to the touch in 1 hour and covers up to 20 sq. ft. per can.
- Offers superior durability and can be used on bare or primed metal truck beds.
- Textured non-skid finish is resistant to scratches and the outdoor elements.
JMTAAT Heavy Duty Unpainted Steel Diamond Fenders Tread Plate Tandem Axle Trailer 10-1/4 x72-7/8 x13 | 2 Fenders
- Fits most 13"-15" Tires. If you're looking for a heavy duty steel fender for your tandem axle trailer this is the one for you. Fits Tandem Axle Trailers..
- Steel diamond plate construction. 10-1/4" Wide x 72-7/8" Long x 13" Tall. Tough and durable enough for long-lasting performance..
- Most commonly this style of fender is welded to the trailers frame at several points, or to brackets that are welded to the trailers frame. Both sides of this fender are able to be used as a welding surface. Electrophoretic surface treatment is effective in rust prevention and provides reliable surface protection..
- Steel diamond plate trailer fenders like this are very common on trailers where equipment or machinery is constantly loaded and unloaded to provide not only protection from road debris, but to protect the tires from being impacted by the equipment. Examples of this would be landscaping deck trailers or bobcat deck trailers..
- Does NOT include backing plate. Professional Assembly is Highly Recommended..
Rust-Oleum 248914 Truck Bed Coating Spray, 15 oz, Black, 15 Ounce (Pack of 1)
- Ideal for use on truck beds, trailer floors, fenders and other metal surfaces.
- Stops Rust formula provides long lasting protection with any-angle spray comfort tip that reduces finger fatigue and makes it easy to reach hard to paint places.
- Dries to the touch in 1 hour and covers up to 20 sq. ft. per can.
- Offers superior durability and can be used on bare or primed metal truck beds.
- Textured non-skid finish is resistant to scratches and the outdoor elements.
Rust-Oleum 248914 Truck Bed Coating Spray, 15 Ounce (Pack of 6), Black, 90 Ounce
- Ideal for use on truck beds, trailer floors, fenders and other metal surfaces.
- Stops Rust formula provides long lasting protection with any-angle spray comfort tip that reduces finger fatigue and makes it easy to reach hard to paint places.
- Dries to the touch in 1 hour and covers up to 20 sq. ft. per can.
- Offers superior durability and can be used on bare or primed metal truck beds.
- Textured non-skid finish is resistant to scratches and the outdoor elements.
ABN Removable Trailer Wheel Chock – Universal Stopper Cradle Holder for Standard Motorcycle Bike Front Wheels
- LOAD AND TRANSPORT YOUR BIKE: The ABN | Motorcycle Wheel Chocks Front Motorcycle Stand Wheel Chock 1-Pack is standard-sized to hold the front wheel of any street bike.
- Motorcycle wheel chocks for trailer floor fits standard front wheels (motorcycles with super-wide front tires or custom low-profile front fenders may not fit this wheel chock).
- EASY TO USE: Designed with one-person loading in mind.
- Simply drive or push your bike into the motorcycle front stand to secure your bike in the upright position (use with straps to tie down and support – not included).
- Takes only minutes to install and seconds to load and unload.
- MOUNT ON FLAT SURFACE: Mount on wood or metal floor – Mounting plate is held off the floor by the included spacers while the bolt that holds the top to the frame goes in from top with nut and lock washer on the bottom under the mounting plate.
- Removable by unbolting from your application surface (not quick attachment) – Mounting points allow the motorcycle wheel stand to be removed.
- 24.5” x 10” x 13” inch (62.2cm x 25.4cm x 33cm) overall and 10-inch (25.4cm) motorcycle front wheel chock length.
- BUILT TO LAST: Heavy-duty 7-gauge formed steel base plate construction, carbon steel hardware....
Thule T2 Classic 2-2', Black
- Secure bikes quickly without frame contact with the frame-free ratcheting arm.
- Eliminate bike interference by adjusting side to side to create generous spacing between bike mounts.
- Ideal for carbon frames, mountain, downhill, ebikes and fat bikes as it fits 20 - 29” wheels and up to 5” tires without adapters.
- Convenient access to rear of vehicle when bikes are loaded – rack tilts away from vehicle via HitchSwitch lever.
- Bike rack locks to vehicle with SnugTite Lock included. Load capacity - 120 Pounds.
- DO NOT INSTALL on a trailer or other towed vehicle..
- DO NOT USE product with bike that has tire fenders. This prevents snug hook grip on tire.
- Please check the Compatibility Guide (under Product Details) to confirm the fit with your vehicle's receiver hitch..
Partsam LED Pedestal Lights Amber/Amber Double Face 39 LED Turn Signal Lights Stud Mount Fender Lights Side Marker Lights for Heavy Truck Trailer Freightliner Peterbilt Kenworth Mack Western Star
- ...ights with Dual Mounting Studs: 39 Total LED's and 3 Amber Side Marker LED's.
- Heavy Duty Chrome Plated Housing, Reflector Design.
- Versatile multi-directional mounting design (up/down/sideway) to turn the light 90 or 180 degrees.
- universal stud mount design with interchangeable single or double studs.
- This Dual-face trailer light is AMBER on both sides! Although in most states in the US it is required for pedestal lights such as this to have an amber face to the front and a red face to the rear, there are some exceptions!.
- This amber square dual-face trailer light serves functions: Parking and rear turn signal light.
- Built-in reflex reflector removes the need for separate reflector and Perfect lights to mount on your truck or trailer side fenders.
- This double face fender light is hard-wired with three plain wires: easy to install with their double stud bolts: White Wire--Negative.
- White + Black--Full light on, 50% low brightness and function as parking light and side marker lights.
- White + Red--Back & Front light on, 100% high brightness and function as turn signal lights.
- This square Led Pedestal Lights can fit for: Freightliner Cascadia Century Classic Columbia Coronado FL70 FLD112 FLD112 FLD120 M2.