ReviewsTrailer Hinge Kit

Partsam 6" Rectangular LED Combination Tail Lights Kit Red, 12V LED Submersible Sealed Rectangular Boat Trailer Stop Turn Tail License Plate Brake Running Light Kit w/25ft Wiring Harness 4Pin+Bracket

  • Partsam LED Trailer Light Kits: package includes 2Pcs LED Combination Trailer Tail Lights, 25 feet wiring harness with a standard 4-way flat connector, license plate bracket, stainless steel mounting screw, bolt and hardware, perfect for trailers under 80" wide.
  • NOTE: Trailers over 80" require side clearance lights. If your trailer already have amber side lights you can use this light kit. Otherwise, please kindly refer to partsam 12v led low profile rectangular trailer light kit.
  • Functions: These rectangular combination tail lights do have built-in red side marker lights and serve as the following lighting functions when properly mounted: stop brake light, turn light, tail light, rear reflex, side marker, side reflex, license plate light(drive side only).
  • Different from many other 8 inch rectangular trailer taillights on market, these waterproof trailer light kit has different light dimensions about 5.9"L*3.35"W*2.28"H, which offers you more applications.
  • Sealed IP68 waterproof trailer lights: Submersible Rectangle LED trailer tail lights are equipt with the sealed circuit board and no screws on the lamp surface, which makes it ideal for ....
Check Stock

10 Pack - 1 1/4\ Carriage Bolt & Nut - Overhead Todco Whiting Door Hinge Morgan

  • ...ges]: Looking for that rustic farmhouse style or old colonial charm? Use the Rural365 4 Pack Heavy Duty 8-Inch Outdoor Gate Hinge Kit.
  • T-shape metal gate bracket hinges with classical decorative design taper from 2.4-inch width at the hinge to 0.8 inches (6.1 to 2cm).
  • [Extra Heavy-Duty Strength]: Each 2-piece set of trailer gate hinges have a load-bearing capacity for up to a total of 55 pound (25kg), making these wooden gate hardware sets ideal for solid core doors and heavy wooden gates.
  • Reversible design allows you to mount for left-handed or right-handed application.
  • [Quality You Can Trust]: Cast iron gate hinges for wooden fences and farmhouse doors are coated with a matte black finish and provide corrosion and oxidation resistance.
  • T-shape is designed for smooth rotation and quiet use.
  • Maximum rotation angle up to 270 degrees.
  • [Easy to Install]: Outside gate hinges black rustic exterior door hinges package includes 16 black screws and 2 exterior shed door hinges.
  • Attach 4.6 x 1.8-inch (11.7 x 4.5cm) wall plate to wall with included 1-inch black screws and attach 6-inch (15.3cm) triangle leaf to door.
  • [Decorate Your Home and Garden]: T-shape is designed for durability and practicality.
  • Use for solid shed and barn doors, heavy gates and fences, woode....
Check Stock

Ryobi A99HT3 Door Hinge Installation Kit/Mortiser Template Bundled with Ryobi A99LM2 Door Latch Installation Kit for Accurate Chiseling and Scoring (1)

  • 2 ITEMS INCLUDED - Ryobi Door Hinge Installation Kit and Ryobi Door Latch Installation Kit.
  • HINGE KIT - 3 INCLUDED BITS WITH BUILT IN STORAGE (carbide tip router bit, self centering hinge bit, PH2/8-10SL double ended screwdriver bit) for routers and screwdrivers, so you can get to work on renovating your home right out of the package.
  • HINGE KIT - CLAMPS TO STANDARD DOORS thanks to the integrated screw in clamp that will let this tool fit standard door thicknesses.
  • LATCH KIT - BUILT-IN SCORING AND CHISEL TOOL: This kit will help you minimize the amount of tools you bring to the jobsite.
  • LATCH KIT - TWO INCLUDED DRIVER BITS: [1x 1-inch PH2 bit] [1x 1-inch SL 8-10 bit].
Check Stock

Kohree New LED Submersible Trailer Tail Light Kit, 12V LED Utility Trailer Lights DOT Approval, Fully Submersible License Lights and Wiring Kit Combined Stop,Taillights,Turn Function for Boat Trailer

  • UPGRADE TRAILER LIGHT: Come with additional atomization strip, Kohree submersible brake tail light kit has superior visibility and faster upon activation than other rectangle led trailer taillights. No glare LED, maximizing light output and giving motorists behind you a better indication of when you're braking, turning or reversing and thus boosting their response time..
  • SEALED WATERPROOF TRAILER LIGHT: No screws on the lamp surface IP68 waterproof, built in epoxy encased electronics and a sonically sealed body to prevent water intrusion and definitely submersible. Also, it can effectively resist damage of sand, dust, dirt, snow and other horrible weather..
  • SURFACE MOUNT: With diodes soldered directly to the surface of a circuit board instead of attached with wires in the drilling-hole board, Kohree 12V led trailer lights protect LEDs from shock and vibration better than through-hole technology. Simply to use..
  • DOT APPROVAL: Kohree hola boat trailer light kit gives your truck a distinctive look and completely street legal, perfect replacement low profile trailer lights for under 80 Inch width towing vehicle, like boat trailer, RV, camper, tractors, canoes, truck, trailer, bus, Lorry, Van, caravan, snowmobile etc..
  • FULL SERVICE TRAILER LIGHTS KIT: This ut....
Check Stock

Kay 36\ Zinc Cargo Trailer Door CamBar Latch Tamper Proof Hinge & Mounting Hardware

  • 36"L Zinc Plated Tamper Proof trailer cambar latch.
  • Unique hinge design covers center bolt to deter removal.
  • Padlockable hasp w/ 2 - 5/16" x 2" Carriage bolts w/ nuts to secure hasp to door.
  • 6 - 5/16" x 2" carriage bolts, nylon nuts & washers to secure hinge to door frame.
Check Stock

(New) 2- Trailer axle Spring Perch/seat for 1-3/4\ 2000# Round Axel Tube Mount Pad + Check All Models in The Description

  • Rockwell American 3,500 lb Idler Axle - Made in the USA.
  • This Axle Kit Includes: (1) 3,500 lb Idler Axle w/ Hubs, Bearings, Lugs & Nuts (2 Year Manufacturers Warranty), (2) Leaf Springs, (1) U-Bolt Kit, (1) Hanger Kit, (1) 32 oz Johnson Trailer Parts Insulated Mug.
  • This Axle Comes with a Superior Powder Coated Finish and Posi-Lube Spindles that Provide Continuous Bearing Protection.
  • 5 Lug on 4.5 Bolt Pattern (other bolt patterns available - Contact Johnson Trailer Parts).
  • Replaces Dexter, Al-Ko & TK Trailer Axles. This Axle Kit is Available in the Sizes Shown in the 3rd Picture, Search "Rockwell American or Johnson Trailer Parts" in Amazon Search Bar for more Trailer Parts.
Check Stock

3.5k-3500 Lb Capacity Trailer Axle Beam Only-Utility/RV/Boat (89\ Hubface-74 Spring Center)

  • Rockwell American Tandem 3,500 lb Electric Brake Trailer Axles - Running Gear Set (7,000 lb Capacity) - Made in the USA.
  • These Axles Comes with a Superior Powder Coated Finish and Posi-Lube Spindles that Provide Continuous Bearing Protection.
  • This Tandem Axle Kit comes with: (2) 3,500 lb Capacity Electric Brake Axle with Hubs, Bearings, Lugs & Nuts (2 Year Warranty), (2) U-Bolt Kits, (1) Tandem Hanger Kit, (4) Double Eye Springs, (1) 32 oz Johnson Trailer Parts Insulated Mug.
  • 5 Lug on 4.5 Bolt Pattern (other bolt patterns available - Contact Johnson Trailer Parts).
  • Replaces Dexter, Al-ko & TK Trailer Axles. This Axle Kit is Available in the Sizes Shown in the 3rd Picture - Search "Johnson Trailer Parts or Rockwell American" in Amazon Search Bar for more Trailer Parts.
Check Stock

Gravity Tilt Deck Kit for Trailers | Hydraulic Tilt Deck Kit

  • Gravity Tilt Deck Kit For Trailers : Kit includes: Hoses and Cylinders Assembled and Filled with Oil, Hydraulic Fittings, Two cylinder supports, Two Toggle Clamps, Safety Signs, Two Hinges, 15 oz Johnson Trailer Parts Premium Ceramic Coffee Mug!.
  • Have you ever seen a car being driven up on a trailer while the trailer is tilted like a ramp?.
  • That is because the trailer has a tilt deck kit installed. Tilt Deck kits are designed to make loading and unloading of cars, truck, tractors, and vehicles of any type much easier. No need to mess with ramps, just drive on and drive away..
  • Please contact us if you have any questions we can assist you with..
  • 32 oz Johnson Trailer Parts Double Walled Insulated Mug.
Check Stock

18 x 80 Car Carrier Trailer Plans Blueprints Model 1218-80

  • Features: | Engineer Approved & Stamped Full Sized 24" x 36" Blueprints | Suitable for High School Shop & Ag Classes, Industry, & Do-it-yourselfers | Detailed Cut List w/ Full Bill of Materials & Welding Tips | Tailored TK Trailer Kit to ensure all the right parts for the plan all packaged up for your convenience. | This plan is specifically made for ( | SOLD SEPARATELY): | TK Trailer Kit - Master Plan 1218 - 8' x 18' Tandem Axle 7K or 10.4K Util.
  • Suitable for High School Shop & Ag Classes, Industry, & Do-it-yourselfers.
  • SEARCH ASIN: B07WGX7697 (7K kit) or ASIN: B07WQFWTZK (10.4K kit) for a complete specifically tailored trailer parts kit for this blueprint.
  • 19 How-to Steps w/ Blueprint and a Detailed Cut List w/ Full Bill of Materials & Welding Tips.
Check Stock

CURT 17200 Trailer Anti-Sway Bar Control Kit , Black

  • IMPROVED CONTROL. This trailer sway control kit helps limit your trailer’s lateral movement, using a brake pad type material to restrict and deter trailer sway.
  • VERSATILE. This trailer sway bar is compatible with a wide variety of weight distribution hitches, including almost all CURT weight distribution hitches. It can also be used on most A-frame trailers.
  • HIGHLY ADJUSTABLE. This sway bar hitch easily adjusts for different trailer types and load sizes. It uses a simple hex nut toggle to adjust the level of trailer sway restriction.
  • EASY SETUP. Setting up this trailer sway control unit with your weight distribution hitch is fast and easy. With the included trailer balls mounted in place, the simply on-off handle makes it easy to engage or disengage the sway control whenever needed.
  • COMPLETE KIT. This anti trailer sway bar includes everything needed for installation on your camper or RV as well as your weight distribution hitch or sway tab ball mount #45820.
Check Stock

Bobco Metals Steel 7\ Barrel Gate Hinges for Heavy Gates & Doors - Welding on Larger Iron or Steel Gates Up to 900 Pounds - Grease Zerk Fitting - Steel Barrels & Copper Pin - 1 Pair

  • Material : 5 inch barrel door hinges are made of high quality cold rolled steel, 900 lb capacity per pair.
  • Strong & Corrosion-resistant: Black finish and durable thick steel material give it a longer service life and anti-rust features.
  • Smooth Rotation: The gate hinge shaft is smooth and can rotate freely back and forth, ensuring smooth operation and squeak-free operation.
  • Application Scenarios: Ideal for heavy duty flat doors, trailer ramps/trailer doors, supports the gate well and prevents the gate from sagging.
  • Easy to Install: door hinge installation requires welding, it is best to remove the black powder coating on the mounting plate before welding.
Check Stock