ReviewsTrailer Jack Footplate

CURT 28358 Weld-On Pipe-Mount Swivel Trailer Jack, 5,000 lbs. 15-1/2 Inches Vertical Travel

  • DEPENDABLE STRENGTH. This trailer jack is rated to support up to 5,000 pounds trailer tongue weight.
  • SWIVEL DESIGN. To ensure plenty of clearance while towing your trailer, this trailer jack stand is equipped with a swivel bracket. The jack swings up and out of the way for towing and features a pull pin to securely lock into place.
  • EASY OPERATION. This trailer tongue jack allows for 15-1/2 inches of vertical movement and operates using a side-wind handle (15-5/8-inch retracted height, 31-1/4-inch extended height). The integrated grip allows for easy raising and lowering.
  • CORROSION-RESISTANT. For long-lasting corrosion resistance against water, dirt, road salt and more, this trailer jack is protected in a durable black powder coat and zinc-plated finish.
  • SECURE INSTALL. This trailer tongue jack is designed to mount onto the trailer frame with a weld-on installation. It comes with a raw steel pipe bracket for ready welding.
Check Stock

Reese 1401440303 Pro Series Weld-On Jack

  • Pro Series 1401440303 Pro Series Round Jack.
Check Stock

Pro Series A-Frame Round Trailer Jack 5000 lbs 15 Lift W/Footplate & 6 Wheel

  • 2 1/4" Diameter jack , Travel 15in, Retracted 10.8.
  • Extended 25.8" Clearance 14.55" Capacity 5K Lbs.
Check Stock

MYOYAY Swivel Trailer Jack with 6 inch Dual Wheel 1500 Lbs Capacity Heavy Duty Boat Trailer Jack Double Wheels Jack

  • 【Capacity】This boat trailer jack is rated to support up to 1500 lbs, and it comes with bolt-on mounting hardware to readily attach to the trailer tongue, 360 degrees rotatation double wheel make it stronger bearing capacity.
  • 【Size】Travel Distance Length: 10 inch (254mm), Retracted Length: 12.6 inch (320mm), Extended Length: 22.6 inch (574mm) (measured from center of mounting plate to bottom of wheel).
  • 【Convenient Mobility】For easier coupling and positioning of your boat trailer, this jack comes with an 6-inch diameter trailer jack double wheel and a convenient handle which allows you to easily swing jack in place, pivot up to stow parallel to trailer tongue for travel, move back into upright position for use.
  • 【Swivel Design】To ensure plenty of clearance while towing your trailer, this trailer jack stand is equipped with a swivel bracket with the 1/2" pull pin. The jack swings up and out of the way for towing and features a heavy-duty pull pin to securely lock into place.
  • 【Corrosion Resistant】This marine boat trailer jack is protected in a durable zinc-plated finish, for long-lasting corrosion resistance against water, dirt, road salt and more.
Check Stock

Delaman Jack Pad Rubber Block for Hopper Stock Bin Durable Frame Protector 65x33mm

  • 【Capacity】This boat trailer jack is rated to support up to 1500 lbs, and it comes with bolt-on mounting hardware to readily attach to the trailer tongue, 360 degrees rotatation double wheel make it stronger bearing capacity.
  • 【Size】Travel Distance Length: 10 inch (254mm), Retracted Length: 12.6 inch (320mm), Extended Length: 22.6 inch (574mm) (measured from center of mounting plate to bottom of wheel).
  • 【Convenient Mobility】For easier coupling and positioning of your boat trailer, this jack comes with an 6-inch diameter trailer jack double wheel and a convenient handle which allows you to easily swing jack in place.
  • Swivel Design】To ensure plenty of clearance while towing your trailer, this trailer jack stand is equipped with a swivel bracket with the 1/2" pull pin..
  • 【Corrosion Resistant】This marine boat trailer jack is protected in a durable zinc-plated finish, for long-lasting corrosion resistance against water, dirt, road salt and more.
Check Stock

CURT 28570 Direct Weld On Heavy-Duty Trailer Jack, 8,000 lbs. 15-1/4 Inches Vertical Travel, Black

  • HEAVY-DUTY STRENGTH. This heavy-duty trailer jack is rated to support up to 8,000 pounds trailer tongue weight (7,000 pounds lift capacity).
  • VERTICAL RANGE. This trailer tongue jack allows for 15-1/4 inches of vertical movement and can be fully retracted for towing (24-1/4-inch retracted height, 39-1/2-inch extended height).
  • EASY OPERATION. This heavy-duty trailer tongue jack features a top-wind handle for easy operation. The handle also has an integrated grip for comfortable handling when raising and lowering the trailer coupler.
  • CORROSION-RESISTANT. For long-lasting corrosion resistance against water, dirt, road salt and more, this trailer jack is protected in a durable black powder coat finish.
  • SECURE INSTALL. This heavy-duty trailer jack is designed to be welded directly onto the trailer tongue (hardware not included).
Check Stock

BISupply Tandem Wheel Ramp – 5.5in Tire Lift Trailer Wheel Jack RV Flat Tire Ramp, Concave Portable Ramp, 1 Pack

  • TRAILER TIRE CHANGING RAMPS: Use the BISupply Tandem Tire Changing Ramp to lift your vehicle so you can easily change a tire on a tandem axle vehicle by yourself without having to empty your trailer.
  • These lightweight, high-traction trailer axle jack ramps evenly distribute vehicle weight to protect the integrity of your tires and are ideal for heavy loads.
  • Can be used on double-axle car, truck, van, or trailer wheels or can be used for storing standard single axle vehicles.
  • PERFECT SIZE FOR YOUR NEEDS: These utility trailer jack tire ramps are designed to lift tandem axle vehicles with ease and security.
  • 7 inch (17.8 cm) tall van ramp provides a 5.5 inch (14 cm) concaved lift and has a total length of 24 inches (61 cm).
  • With an 8-inch (20.3 cm) width base and a 10 ton (20,000 lb.) lifting capacity per drive on jack ramp, you will be ready for anything.
  • Each package includes (1) trailer tire change ramp.
  • EASILY CHANGE YOUR VEHICLE TIRES: Place the quick jack trailer lift jack ramps on a flat surface in front or behind the good wheel.
  • Slowly drive the good wheel onto the trailer tire ramp then replace the flat tire.
  • Drive trailer off of the RV tire changing ramp and tighten lug nuts.
  • CONCAVE RAMPS PROTECT YOUR TIRES: Whether you are storing you....
Check Stock

Swivel Trailer Jack 2000lbs Capacity, 10.5" Lift, Dual 8" Wheel, Heavy Duty Boat Trailer Jack for Tongue Swing-Back Boat, RV Utility

  • LOAD CAPACITY 2000lbs:A-Frame Trailer jack has swivel plate double reinforcement. Gets rid of the hassle of hitching, making it easy to lift, level and adjust..
  • SWIVEL TRAILER JACK SIZE:Travel lift: 10.5" and Height range: 25"-35.4"..
  • LABOR-SAVING HANDLE:Boat trailer jack with handle bolt-on installation. 1/2" swivel pull pin. Tongue jack quality and sturdy can be used for 10-year. Don't worry about rustinghigh..
  • WIDE APPLICATION:All kinds of boat trailer, Swing-Back Boat, RV. Mounted on 3" x 5" trailer frame, 2" tongue trailer..
  • DUAL WHEELS: 360° swirl, diameter: 8", providing greater stability and mobility. Trailer jack fits any sand better soft ground roll, no sinking..
Check Stock

Lippert Components 643589 Smart Jack Black

  • INNOVATIVE DESIGN — Includes a modern, backlit monitor that illuminates when touched for night-time operation and turns off automatically to....
  • TIME-SAVING — The Auto-Hitch Memory Function and the auto-retract feature allow your jack to automatically retract and extend to original hitch....
  • INTEGRATED LIGHTING — Bright, halo-effect LED lights illuminate the ball and coupler, so you can operate your jack at night, worry-free.
  • POWERFULLY ENGINEERED — Built to do heavy lifting, our Smart Jack has a 3,500 lb. lift capacity, helical-cut gears, 30 AMPs of power, and a 12V....
  • BUILT TOUGH — Made with an extra-large footplate for added stability, heavy-gauge, steel construction, a durable, textured housing that prevents....
Check Stock

Reese 1400850383 Pro Series Square Jack - 8000 lbs Black

  • PRO SERIES JACK: Square jack design with sidewind provides superior side-loading.
  • DURABLE: Durable and long-lasting steel construction.
  • FEATURES: Features a black powder coat finish that helps avoid rust and corrosion.
  • Sidewind handle has a smooth, ergonomic design for easy cranking.
  • MOUNTABLE: Direct-weld design for easy access.
  • SPECIFICATIONS: Bracket height: 25.12 inches (retracted) and 53.68 inches (extended).
Check Stock

Dumble RV Stabilizer Jacks - 4pk Attachable Telescoping Travel Trailer Jack Stabilizer Stands and Jack Rod

  • [Level Up Your Travel Game]: Ensure stability when loading and unloading with the Dumble RV Supplies Folding Trailer Stabilizer Jacks for Campers and more.
  • Includes 4 flip down trailer legs, 1 handle, and mounting screws.
  • [Optimal Weight Capacity]: Each RV jack stand provides a lift capacity up to 650 pounds (294.8kg) and a 1,000-pound (453.6kg) breaking point.
  • Rear trailer stands work as sport utility trailer jacks, pop up camper stabilizer jacks, RV leveling jacks, food truck drop leg trailer supports, and boat trailer drop jacks.
  • [Expanding Height]: Telescoping stabilizer jacks can be adjusted from 12 to 18 inches (30.5 to 45.7cm) tall effortlessly by using the 11.7-inch (29.7cm) long steel jack rod handle.
  • [Built To Last]: Premium powder-coated steel trailer leveling jacks resist outdoor elements for long-lasting reliability.
  • Trailer jack foot plate measures 3.4 by 3.9 inches (8.6 x 9.9cm) wide for stability.
  • [Folds Up for Safe Travels]: Mount to camper bumper, then pull down on leg to fold cargo trailer jack stands up and down.
  • Spring mechanism and notch catches ensure a secure hold when driving.
  • Swing down trailer stabilizer jacks will stand 4.1 inches (10.4cm) from mounted surface.
Check Stock