ReviewsTrailer Jack Spacers

CURT 28354 Weld-On Pipe-Mount Swivel Trailer Jack, 5,000 lbs. 10 Inches Vertical Travel , Black

  • DEPENDABLE STRENGTH. This trailer jack is rated to support up to 5,000 pounds trailer tongue weight.
  • SWIVEL DESIGN. To ensure plenty of clearance while towing your trailer, this trailer jack stand is equipped with a swivel bracket. The jack swings up and out of the way for towing and features a pull pin to securely lock into place.
  • EASY OPERATION. This trailer tongue jack allows for 10 inches of vertical movement and operates using a side-wind handle (10-1/4-inch retracted height, 20-1/4-inch extended height). The integrated grip allows for easy raising and lowering.
  • CORROSION-RESISTANT. For long-lasting corrosion resistance against water, dirt, road salt and more, this trailer jack is protected in a durable black powder coat and zinc-plated finish.
  • SECURE INSTALL. This trailer tongue jack is designed to mount onto the trailer frame with a weld-on installation. It comes with a raw steel pipe bracket for ready welding.
Check Stock

CURT 28358 Weld-On Pipe-Mount Swivel Trailer Jack, 5,000 lbs. 15-1/2 Inches Vertical Travel

  • DEPENDABLE STRENGTH. This trailer jack is rated to support up to 5,000 pounds trailer tongue weight.
  • SWIVEL DESIGN. To ensure plenty of clearance while towing your trailer, this trailer jack stand is equipped with a swivel bracket. The jack swings up and out of the way for towing and features a pull pin to securely lock into place.
  • EASY OPERATION. This trailer tongue jack allows for 15-1/2 inches of vertical movement and operates using a side-wind handle (15-5/8-inch retracted height, 31-1/4-inch extended height). The integrated grip allows for easy raising and lowering.
  • CORROSION-RESISTANT. For long-lasting corrosion resistance against water, dirt, road salt and more, this trailer jack is protected in a durable black powder coat and zinc-plated finish.
  • SECURE INSTALL. This trailer tongue jack is designed to mount onto the trailer frame with a weld-on installation. It comes with a raw steel pipe bracket for ready welding.
Check Stock

MYOYAY Swivel Trailer Jack with 6 inch Dual Wheel 1500 Lbs Capacity Heavy Duty Boat Trailer Jack Double Wheels Jack

  • 【Capacity】This boat trailer jack is rated to support up to 1500 lbs, and it comes with bolt-on mounting hardware to readily attach to the trailer tongue, 360 degrees rotatation double wheel make it stronger bearing capacity.
  • 【Size】Travel Distance Length: 10 inch (254mm), Retracted Length: 12.6 inch (320mm), Extended Length: 22.6 inch (574mm) (measured from center of mounting plate to bottom of wheel).
  • 【Convenient Mobility】For easier coupling and positioning of your boat trailer, this jack comes with an 6-inch diameter trailer jack double wheel and a convenient handle which allows you to easily swing jack in place, pivot up to stow parallel to trailer tongue for travel, move back into upright position for use.
  • 【Swivel Design】To ensure plenty of clearance while towing your trailer, this trailer jack stand is equipped with a swivel bracket with the 1/2" pull pin. The jack swings up and out of the way for towing and features a heavy-duty pull pin to securely lock into place.
  • 【Corrosion Resistant】This marine boat trailer jack is protected in a durable zinc-plated finish, for long-lasting corrosion resistance against water, dirt, road salt and more.
Check Stock

Delaman Jack Pad Rubber Block for Hopper Stock Bin Durable Frame Protector 65x33mm

  • 【Capacity】This boat trailer jack is rated to support up to 1500 lbs, and it comes with bolt-on mounting hardware to readily attach to the trailer tongue, 360 degrees rotatation double wheel make it stronger bearing capacity.
  • 【Size】Travel Distance Length: 10 inch (254mm), Retracted Length: 12.6 inch (320mm), Extended Length: 22.6 inch (574mm) (measured from center of mounting plate to bottom of wheel).
  • 【Convenient Mobility】For easier coupling and positioning of your boat trailer, this jack comes with an 6-inch diameter trailer jack double wheel and a convenient handle which allows you to easily swing jack in place.
  • Swivel Design】To ensure plenty of clearance while towing your trailer, this trailer jack stand is equipped with a swivel bracket with the 1/2" pull pin..
  • 【Corrosion Resistant】This marine boat trailer jack is protected in a durable zinc-plated finish, for long-lasting corrosion resistance against water, dirt, road salt and more.
Check Stock

CURT 28570 Direct Weld On Heavy-Duty Trailer Jack, 8,000 lbs. 15-1/4 Inches Vertical Travel, Black

  • HEAVY-DUTY STRENGTH. This heavy-duty trailer jack is rated to support up to 8,000 pounds trailer tongue weight (7,000 pounds lift capacity).
  • VERTICAL RANGE. This trailer tongue jack allows for 15-1/4 inches of vertical movement and can be fully retracted for towing (24-1/4-inch retracted height, 39-1/2-inch extended height).
  • EASY OPERATION. This heavy-duty trailer tongue jack features a top-wind handle for easy operation. The handle also has an integrated grip for comfortable handling when raising and lowering the trailer coupler.
  • CORROSION-RESISTANT. For long-lasting corrosion resistance against water, dirt, road salt and more, this trailer jack is protected in a durable black powder coat finish.
  • SECURE INSTALL. This heavy-duty trailer jack is designed to be welded directly onto the trailer tongue (hardware not included).
Check Stock

BISupply Tandem Wheel Ramp – 5.5in Tire Lift Trailer Wheel Jack RV Flat Tire Ramp, Concave Portable Ramp, 1 Pack

  • TRAILER TIRE CHANGING RAMPS: Use the BISupply Tandem Tire Changing Ramp to lift your vehicle so you can easily change a tire on a tandem axle vehicle by yourself without having to empty your trailer.
  • These lightweight, high-traction trailer axle jack ramps evenly distribute vehicle weight to protect the integrity of your tires and are ideal for heavy loads.
  • Can be used on double-axle car, truck, van, or trailer wheels or can be used for storing standard single axle vehicles.
  • PERFECT SIZE FOR YOUR NEEDS: These utility trailer jack tire ramps are designed to lift tandem axle vehicles with ease and security.
  • 7 inch (17.8 cm) tall van ramp provides a 5.5 inch (14 cm) concaved lift and has a total length of 24 inches (61 cm).
  • With an 8-inch (20.3 cm) width base and a 10 ton (20,000 lb.) lifting capacity per drive on jack ramp, you will be ready for anything.
  • Each package includes (1) trailer tire change ramp.
  • EASILY CHANGE YOUR VEHICLE TIRES: Place the quick jack trailer lift jack ramps on a flat surface in front or behind the good wheel.
  • Slowly drive the good wheel onto the trailer tire ramp then replace the flat tire.
  • Drive trailer off of the RV tire changing ramp and tighten lug nuts.
  • CONCAVE RAMPS PROTECT YOUR TIRES: Whether you are storing you....
Check Stock

Swivel Trailer Jack 2000lbs Capacity, 10.5" Lift, Dual 8" Wheel, Heavy Duty Boat Trailer Jack for Tongue Swing-Back Boat, RV Utility

  • LOAD CAPACITY 2000lbs:A-Frame Trailer jack has swivel plate double reinforcement. Gets rid of the hassle of hitching, making it easy to lift, level and adjust..
  • SWIVEL TRAILER JACK SIZE:Travel lift: 10.5" and Height range: 25"-35.4"..
  • LABOR-SAVING HANDLE:Boat trailer jack with handle bolt-on installation. 1/2" swivel pull pin. Tongue jack quality and sturdy can be used for 10-year. Don't worry about rustinghigh..
  • WIDE APPLICATION：All kinds of boat trailer, Swing-Back Boat, RV. Mounted on 3" x 5" trailer frame, 2" tongue trailer..
  • DUAL WHEELS: 360° swirl, diameter: 8", providing greater stability and mobility. Trailer jack fits any sand better soft ground roll, no sinking..
Check Stock

Dumble RV Stabilizer Jacks - 4pk Attachable Telescoping Travel Trailer Jack Stabilizer Stands and Jack Rod

  • [Level Up Your Travel Game]: Ensure stability when loading and unloading with the Dumble RV Supplies Folding Trailer Stabilizer Jacks for Campers and more.
  • Includes 4 flip down trailer legs, 1 handle, and mounting screws.
  • [Optimal Weight Capacity]: Each RV jack stand provides a lift capacity up to 650 pounds (294.8kg) and a 1,000-pound (453.6kg) breaking point.
  • Rear trailer stands work as sport utility trailer jacks, pop up camper stabilizer jacks, RV leveling jacks, food truck drop leg trailer supports, and boat trailer drop jacks.
  • [Expanding Height]: Telescoping stabilizer jacks can be adjusted from 12 to 18 inches (30.5 to 45.7cm) tall effortlessly by using the 11.7-inch (29.7cm) long steel jack rod handle.
  • [Built To Last]: Premium powder-coated steel trailer leveling jacks resist outdoor elements for long-lasting reliability.
  • Trailer jack foot plate measures 3.4 by 3.9 inches (8.6 x 9.9cm) wide for stability.
  • [Folds Up for Safe Travels]: Mount to camper bumper, then pull down on leg to fold cargo trailer jack stands up and down.
  • Spring mechanism and notch catches ensure a secure hold when driving.
  • Swing down trailer stabilizer jacks will stand 4.1 inches (10.4cm) from mounted surface.
Check Stock

osemar Boat Trailer Jack with Wheel 1500 lbs 6\ Dual Wheels Swivel

  • Small trailer jack wheel, , lifts and lowers your boat trailer, lifting capacity: 1500 pounds, adjustable height: 10-1/2"..
  • Trailer jacks using precision seamless steel pipe, the surface is galvanized, anti-corrosion and anti-oxidation..
  • Boat trailer jack heavy duty thicken and widen, high-load double nylon wheels, loose nut, effortless implementation and high safety..
  • 1500 trailer jack mounting plate and interface are double-layer reinforced, with strong bearing capacity and durability..
  • boat trailer stand crank handle is upgraded, the installation screw cap is detachable, and the handle cover is more convenient to replace..
Check Stock

ANDERSEN HITCHES | RV Accessories | Ultimate Trailer Gear | LIFETIME WARRANTY | Trailer Jack Block Bag | 3600

  • With the Andersen Hitches Ultimate Trailer Gear Duffel Bag, you'll have everything you need to make your campsite set up a breeze! The perfect RV....
  • A full camper leveler kit (2 Camper Levelers, 2 TUFF chocks) are included in the bag! Simply drive on until level, chock... and DONE! You'll won't....
  • Drive on to the Rapid Jack to lift your trailer to change a tire. The Rapid Jack can also double as a jack wheel holder, a jack block post, a pad....
  • Keep 90% of the dirt OUTSIDE of your RV, Trailer, or Home, with the innovative Clean Step! No more dirty, worn-out mats to throw away... and less dirt....
  • When you need a pad for your trailer jack or stabilizer legs, look no further than the TUFF pad from Andersen Hitches.
Check Stock

bullke Trailer Jack Block Stand | 12,000 lbs Capacity Trailer & RV Stabilizing Pads | Strongest Blocks for RV 5th Wheel Camper, Post, Foot, Tongue Jack, or Stabilizer Round, Square Pad Leveler

  • ⍟ DURABLE & UV RESISTANT: The bullke stabilizer blocks for camper trailer jack supports up to 12,000 lbs.. Our trailer stabilizer stand is made in the USA with Recycled Plastic which is UV Resistant..
  • ⍟ MULTI-USE: Our jack pads is for motorhomes, trailers, RVs. fits most trailer jacks with Wheel, RV Camper, Pop Up, Boat, etc. Stabilize and secure with rv stabilizer blocks that have up to 12,000lbs capacity - the strongest RV jack block on the market today!.
  • ⍟ VERSATILE: These camper wheel chock stabilizer stands are designed to be stacked to adjust for all terrains. Understanding that you have different needs for trailer tongue support types, and trailer stand capacities, here at bullke we offer these rv wheel stabilizer even leveling blocks in sets of 2, 3, 4, and 5 RV jack pad blocks..
  • ⍟ DIMENSION: The unique RV blocks for leveling by bullke are lightweight, yet superiorly sturdy with dimensions of 10 X 10 X 4 inches. They are expertly designed and made in the USA with thick and heavy-duty materials to support most tongue jack, foot, post, and stabilizers (round or square)..
  • ⍟ QUALITY YOU CAN TRUST: Rest assured knowing that these rv jack foot plate stands are made from premium thick plastic right here in the USA. Here at bullke to build prod....
Check Stock