ReviewsTrailer Jack Wheel

MAXXHAUL Trailer Jack Wheel

  • Bolt-on trailer jacks for use with utility and boat trailers.
  • Our Jack features a swivel or swing back bracket that allows jack to be out of the way when not in use.
  • Heavy duty pull pin securely lock jack into place in the horizontal or vertical position.
  • Trailer tongue jack has a 10" vertical lift and includes a side wind handle with swivel grip for convenient operation.
Check Stock

NBJINGYI 6 Trailer Swirl Jack Caster Wheel Replacement 1200lbs Capacity with Bolt and net

  • 6" 2000lbs Replacement trailer jack wheel.
  • Replacement caster wheel with bolt and net.
  • NBJINGYI specializes in the production of trailer accessories. It has a group of professional and advanced production equipment and technical....
Check Stock

ANDERSEN HITCHES | RV Accessories | Ultimate Trailer Gear | LIFETIME WARRANTY | Trailer Jack Block Bag | 3600

  • With the Andersen Hitches Ultimate Trailer Gear Duffel Bag, you'll have everything you need to make your campsite set up a breeze! The perfect RV....
  • A full camper leveler kit (2 Camper Levelers, 2 TUFF chocks) are included in the bag! Simply drive on until level, chock... and DONE! You'll won't....
  • Drive on to the Rapid Jack to lift your trailer to change a tire. The Rapid Jack can also double as a jack wheel holder, a jack block post, a pad....
  • Keep 90% of the dirt OUTSIDE of your RV, Trailer, or Home, with the innovative Clean Step! No more dirty, worn-out mats to throw away... and less dirt....
  • When you need a pad for your trailer jack or stabilizer legs, look no further than the TUFF pad from Andersen Hitches.
Check Stock

Lippert 191025 JT's Strong Arm Travel Trailer Stabilizer Kit , Gray

  • ELIMINATES CHASSIS MOVEMENT — The JT’s Strong Arm Stabilizer Kit is designed to eliminate chassis movement in your 5th wheel RV or travel trailer using the same engineering as a race car chassis.
  • EASY INSTALLATION — With no welding required, this system can easily bolt-on to your landing gear and RV’s frame for a one-time installation.
  • THREE CONFIGURATIONS — Available in three sizes: Standard 5th Wheel Kit, Short 5th Wheel Kit and Travel Trailer.
  • COMPATIBILITY — This stabilizer kit was designed to work with most major RV jack assemblies — including, scissor, front landing gear and telescoping.
  • FULLY EQUIPPED — Kit comes complete with inner tubes, outer tubes and all necessary mounting and installation hardware.
  • RV travel trailer jack stabilizer kit comes complete with everything needed for DIY installation.
  • Designed to eliminate side-to-side and front-to-rear RV movement and shaking.
  • Stabilizer bars form triangles at front and rear jacks to prevent shaking and swaying.
Check Stock

(2-Pack) AR-PRO 6-Inch Boat Trailer Jack Wheels - Universal Fit Black Plastic Caster Wheels - Includes All Mounting Hardware - Suitable for Boat Trailer Jacks with 1 or 2 Wheels

  • 1 PAIR OF CASTER WHEELS FOR BOAT TRAILER JACK - This is a universal replacement for boat trailer jacks. Wheel dimensions are 5 5/8 diameter (6-inch nominal diameter), 2 inches width, and a 5/8 bore hole.
  • DURABLE PLASTIC CASTER WHEELS - Complements the marine boat trailer jack’s durability. Can withstand constant water exposure and can resist wear and abrasion from heavy use. Each caster wheel can support up to 1,200 lbs.
  • INCLUDES BOLTS, NUTS, BUSHING, AND WASHERS - This pack includes 2 caster wheels, 2 short axle bolts (with 2 nuts, 2 washers, and 2 sleeves), and 1 long axle bolt (with 1 nut, 1 washer, and 1 sleeve).
  • CORROSION-RESISTANT HARDWARE - All mounting hardware has a corrosion-resistant finish for enhanced longevity in coastal environments.
  • SUITABLE FOR UNITS THAT USE 1 OR 2 WHEELS - Includes hardware for boat trailer jacks that only require one 6-inch caster wheel and units that use 6-inch dual wheel casters.
Check Stock

New! Steering Arm for Trailer Wheel Jack, Quick Swivel Dual Wheel Turning. Use It With Boat, Utility, Jet Ski, Marine, or Small Utility Trailer. Bolt-On Your Wheel Jack! New Patent Pending Design.

  • 003cp003e003cstrong003eAll-Purpose Trailer Wheel Jack Handle003c/strong003e – This long-handled arm can support a wide range of travel trailer jack utility trailers and vehicles including pontoon and fishing boats, jet skis, snowmobiles, and PWC trailers.003c/p003e.
  • 003cp003e003cstrong003eHelps Ensure Proper Alignment003c/strong003e – The lightweight, easy-steer swivel handle makes it easier to line up your trailer hitch when you’re hooking up to or unhooking a vehicle from your trailer.003c/p003e.
  • 003cp003e003cstrong003eLong, Comfortable Grip with Optimal Leverage003c/strong003e – The 16” handle and bolt-on design gives you more leverage when loading a trailer, reducing the strain on your arms, hands, and wrists over common frame pulling.003c/p003e.
  • 003cp003e003cstrong003eImproves Vehicle and Trailer Safety003c/strong003e – Using a trailer jack stand arm helps you line up the tongue more effectively to help prevent potential accidents, drops, or damage to your trailer or vehicle.
  • vital for solo mounting and unmounting.003c/p003e.
  • 003cp003e003cstrong003eLightweight, Bolt-On Mount003c/strong003e – Compatible with most utility trailer this wheel steering handle can be bolted onto the trailer frame with enhanced stability and features tube siz....
Check Stock

Lippert 285325 24' Scissor Jack

  • DURABLE CONSTRUCTION — Built tough with a black, powder-coated finish and rust-inhibitive surface that allows it to take on the wear and tear of RV travel.
  • ECONOMICAL SOLUTION — Inexpensive and extremely reliable, this scissor jack kit is a must-have if you’re replacing an old or broken stabilizer jack.
  • EXTENSION RANGE — The scissor jack extends up to a maximum of 24” and retracts to 4-1/4” for compact storage when not in use.
  • SECURE INSTALL — Our scissor jack kits come complete with all mounting hardware needed for bolt-on installation on your 5th wheel, travel trailer or cargo/utility trailer .
  • DEPENDABLE STRENGTH — This scissor jack is rated to support up to a 5,000 lb. load capacity per jack .
Check Stock

LEORAY Jack Wheel Chock, Reinforced Rubber Jack Caster Wheel Dock for Caravans and Trailers

  • ULTIMATE PROTECTION - The LEORAY heavy duty Chock for Jack Caster Wheels not only spreads the weight load evenly and prevents jack wheel from rolling or sinking into soft ground, but also prevents sideways movement once your caravan is in its stationary position. It's indeed a perfect solution to your trailer tongue problems..
  • EXTEND JACK WHEEL SERVICE LIFE - Place the Chock underneath to prevent your Jack Wheel from incurring any damage from mud, sand, oil and dirt in general. Drainage hole prevents rain from building up and causing rust damage. The jack wheel chock keeps your jack wheel clean and prolongs its service life..
  • MADE TO LAST - Made from premium nitrile rubber material in one-piece molding, the chock is super heavy duty and reasonably resistant to oil, water, gasoline, propane and some hydraulic fluids. It will keep your Jack Wheel safe for years and years..
  • ODORLESS & EASY TO STORE - Being treated with high temperature vulcanization, it is durable, odorless, nontoxic and endures extreme outdoor temperature. With a portable size of 6.6 in x 5 in x 1.38 in, the chock could be easily stored in your car..
  • NO-RISK PURCHASE - Your satisfaction is our top priority which is why we make sure that every product you receive from us is made with high q....
Check Stock

VEVOR Manual Trailer Dolly, 10000 lb Load Capacity Trailer Mover Valet with 2-5/16 in Ball & 10.63\ Wheels, Adjustable Height Heavy-Duty Jack Tug for Car, RV, Boat, and Travel Trailers

  • Extraordinary Towing Capacity: Structured with heavy-duty stainless steel for extended durability and following innovative design principles, this trailer mover is strong enough to pull 10,000 lbs of weight and could be used to move various trailers. Are you looking for an affordable and reliable way to move your trailer? Well, look no further than VEVOR's trailer dolly 2 5/16 ball..
  • Powerful Gear Drive System: The trailer dolly has an ergonomic crank and the integrated wheel wedge is made of strong and engineered plastic for a comfortable touch. The side winding handle of the dolly for trailer provides fast operation by driving chains and gears. Get into gear and get yourself a trailer mover that works as hard as you do..
  • 10.63" Pneumatic Tires: This tongue jack includes two 10.63''×7.28'' pneumatic tires. A twin-track wheel design with a 500-pounds load capacity for sustaining optimal pressure and providing security during work time, so you can get the impossible done..
  • Adjustable Fixing Plate: Durable trailer tongue dolly designed for mounting on trailer frames. After installing this trailer jack, you can reliably raise and lower the trailer to the desired height or move the trailer to the specified location..
  • Widely Used: This trailer dolly is a gre....
Check Stock

AEV JK Wrangler Spare Tire Jack Base Booster

  • AEV’s Jack Base provides 3-1/2 inches of additional lift height to the stock Wrangler’s “scissor” jack.
  • The large 7.5″ x 10.5″ base gives the jack better stability in off-road and soft soil conditions.
  • Handy compartments in the base store your AEV lug nut extension and the OE wheel lock key..
  • The Jack Base is shaped to fit neatly into the JK’s rear floor compartment.
  • Doubles as a wheel chock to prevent a disabled vehicle or trailer from rolling..
Check Stock

VEVOR Manual Trailer Dolly, 5000lb Load Capacity Trailer Mover Valet w/ 6.3\ Hitch Plate & 10.63\ Wheels, 10.64\ Adjustable Height, Heavy-Duty Trailer Jack Tug for Car, RV, Boat, and Travel Trailers

  • Extraordinary Towing Capacity: Structured with heavy-duty stainless steel for extended durability and following innovative design principles, this trailer mover is strong enough to pull 5,000 lbs of weight and could be used to move various trailers. Are you looking for an affordable and reliable way to move your trailer? Well, look no further than VEVOR's trailer dolly 2 5/16 ball..
  • Powerful Gear Drive System: The trailer dolly has an ergonomic crank and the integrated wheel wedge is made of strong and engineered plastic for a comfortable touch. The side winding handle of the dolly for trailer provides fast operation by driving chains and gears. Get into gear and get yourself a trailer mover that works as hard as you do..
  • 10.63" Pneumatic Tires: This tongue jack includes two 10.63''×7.28'' pneumatic tires. A twin-track wheel design with a 500-pounds load capacity for sustaining optimal pressure and providing security during work time, so you can get the impossible done..
  • Adjustable Fixing Plate: Durable trailer tongue dolly designed for mounting on trailer frames. After installing this trailer jack, you can reliably raise and lower the trailer to the desired height or move the trailer to the specified location..
  • Widely Used: This trailer dolly is a grea....
Check Stock