ReviewsTrailer Lights

12v Magnetic Towing Tow Light Kit Trailer Rv Tow Dolly Tail Towed Car Boat Truck

Complete Trailer Light Kit: This Trailer Light Kit includes 2 combination tail and brake/turn signals lights, 2 amber LED marker lights ,25-ft wiring harness,license plate bracket and mounting hardware bag, everything you need to do the install included..
IP68 Waterproof and Submersible trailer lights: The circuit board is completely sealed and IP68 waterproof, which protects the board from short circuit even soak in the water, it can work long hour in rainy days, fog day or snow day, it is totally submersible(Test Underwater light for 24 hours)..
High Visibility LED Trailer Tail Lights: Super clear and brighter SMD 5050 lamp beads with Halo Glow design produces a super fashion light, no glare, Up to 50,000 hrs life expectancy.
Compliant with DOT standards, perfect replacement trailer lights for RV, tractors, canoes,towing vehicle, truck, trailer, boat, bus, Lorry, Van, caravan, snowmobile etc.
25ft wiring harness, so that it is long enough to reach end of trailer,instruction included and 1 year warranty..

Check Stock

Guide to Colorado Backroads & 4-Wheel-Drive Trails, 4th Edition (FunTreks Guidebooks)

Warning: Wires come out from the conner, NOT from the center. (Check image 2).
Partsam (7) Amber + (7) Red Oval Oblong Side Marker Light Lamps.
It is Universal For all auto esp. RV Trailer Camper Boats etc. 【Tip: wires were brought out at the lower corner of the light and not the center,】.
Can be function as Side Marker Lights, Clearance Lamps and Indentification Lamps, Trailer Lights etc..
About 100mm(L)x 50mm(W) x 25mm(H) = 4" x 2" x 1" oval oblong rectangular rectangle led light sealed.
Tiger Eye / Double Bubble LED Marker Lights.
Led Marker TRAILER LIGHTS EXTERIOR LIGHTS.
LED running lights Side fender lights side body lights. bullseye led side fender marker lights.
Trailer-Style Rectangular LED Marker OR Turn Signal Lights.

Check Stock

CURT 58140 Trailer-Side 7-Pin RV Blade Wiring Harness Connector

EASY GRIP. Plugging in your trailer wiring and trailer lights is easy with the ergonomic design of this trailer plug. It features two hooks on either side of the plug for a better grip when plugging in or unplugging trailer wiring.
WEATHER-RESISTANT. This trailer wiring plug comes with concealed wire terminals. This helps protect the splice-in connection points for the wires, keeping them safe from dirt, rain, corrosion and other threats.
RELIABLE CONNECTION. This 7-pin trailer wiring plug comes ready to splice into your existing trailer wiring. It can be used to connect the taillights, brake lights, reverse lights, turn signals, trailer brakes and auxiliary power.
VERSATILE DESIGN. This connector makes a great replacement 7-way RV blade connector and is interchangeable with virtually any trailer-side 7-way RV connector. 7-pin trailer wiring is commonly used for towing RV travel trailers.
DURABLE CONSTRUCTION. For long-lasting use and a reliable connection, the housing of this 7-pin trailer wiring plug is made from durable black plastic that will never rust or corrode.

Check Stock

CURT 58141 Trailer-Side 7-Pin RV Blade Wiring Harness Connector

EASY GRIP. Plugging in your trailer wiring and trailer lights is easy with the ergonomic design of this trailer plug. It features two hooks on either side of the plug for a better grip when plugging in or unplugging trailer wiring.
WEATHER-RESISTANT. This trailer wiring plug comes with concealed wire terminals. This helps protect the splice-in connection points for the wires, keeping them safe from dirt, rain, corrosion and other threats.
RELIABLE CONNECTION. This 7-pin trailer wiring plug comes ready to splice into your existing trailer wiring. It can be used to connect the taillights, brake lights, reverse lights, turn signals, trailer brakes and auxiliary power.
VERSATILE DESIGN. This connector makes a great replacement 7-way RV blade connector and is interchangeable with virtually any trailer-side 7-way RV connector. 7-pin trailer wiring is commonly used for towing RV travel trailers.
DURABLE CONSTRUCTION. For long-lasting use and a reliable connection, the housing of this 7-pin trailer wiring plug is made from durable black plastic that will never rust or corrode.

Check Stock

Trailer Light Led, Boat Trailer Light Kit, IP68 Waterproof Led Trailer Lights, Combo Stop Turn Running Brake License Plate Lights for Trailers, Truck, Boat etc

Multifunction Trailer Lights: This combination trailer tail lights work as stop, turning, brake, tail, rear reflector, reflector and side marker light..
Submersible Rectangular Trailer Lights: With IP68 Waterproof rating, makes it ideal for the trailers submerged, like boat trailer..
Fully Compliant with DOT: Construct with super bright LED lights and 100% sealed circuit board to ensure high visibility, even inclement weather, provide safe driving..
Wire Tips: Left Side: White Wire: Ground.
White+Yellow: High Brightness, used as Brake Light.
White+Brown: Low Brightness, used as Running Light/Left License Plate Lamp.
White+Green, : High Brightness, used as Brake Light.
White+Brown: Low Brightness, used as Running Light..
Wide Application: The trailer lights are perfect for boat truck trailer under and over 80 inch width. Can be widely used on truck, trailer, boat, bus, lorry, van, caravan, snowmobile, etc..

Check Stock

PSEQT 3/4" Round LED Side Marker Clearance Lights Front Rear Marker Indicators Tail Light Waterproof for Trailer Truck Car Bus Van Pickup RV ATV Wrangler (10pcs Red & 10pcs Amber )

✅【Pack of 20】10 x Red & 10 x Amber 3/4'' Round Trailer Side Marker Lights with rubber grommets. 12V DC voltage, mini size, flush mount..
✅【Application】Commonly used as Trailer Side Marker Lights, Clearance Lights, Turn Signal Lights, Identification Lights, Tail Lights, Auxiliary Stop Tail Turn Lights, Exterior Safety Signal Lights, etc..
✅【Universal Fit】Widely used in all 12V Cars, Trailer, Clearance Bus, Truck, RV, ATV, UTV, RZR, Wrangler, Golf Cart, Offroad, Van, Caravan, Lorry, Semi Trailer, Cargo Trailer, Boat Trailer, Pickup, etc..
✅【High Brightness】Each Clearance Marker Light comes with 3 built-in SMD LEDs, which output super bright light to safe your night. Over 50,000 hours of working life, energy saving and low consumption..
✅【Truly waterproof】IP68 sealed waterproof, there is no problem working above or under water. Made of strengthen PC Lens and rubber grommets, it is resistant to collision, corrosion, dust and moisture. Not afraid of the test of wind, frost, rain and snow..

Check Stock

10Pcs 2 Inch Round Led Marker Lights, 2 Inch Round Trailer LED Side Marker and Clearance Marker Lights 4 LED Sealed Flush Mount with Rubber Grommets and 2 Prong Wire Pigtails Waterproof (5Red+5Amber)

This listing features for 5 Pieces 2 Inch round amber led marker lights and 5 Pieces 2 Inch round red led marker lights. These 2 Inch led marker lights are flush mounts to trailer trucks with rubber grommets and standard 2-prong wire pigtails.
These 2 round led marker lights include grommets and pigtails for complete installation.
Each 2 inch round trailer marker light come with 4 LEDs, providing you better visability when driving on road.
Sonically sealed, IP67 waterproof housing and lens unit is submersible.
Wiring tips: Each 2 inch round trailer side marker lights includes a standard 2 prong wire pigtails: Black is the negative and red is the positive. Dimensions: Outer Diameter: 2.5"in., Inner Diameter: 2"in., High w/ Grommet: 1in.(depends how in you press the lights) , you may need to drill a hole about 2-5/16" to install.
These 2 inch round led trailer clearance lights are universal for almost all 12v dc vehicles, such as Semi Truck Trailers, Utility Truck, Horse Trailer, Utility Trailer, Pick Up Truck, UTE, UTV etc. Note: So these 2 round led lights can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, please install 2 separate lights on your trailer - one as a front or rear....

Check Stock

VINAUO Trailer Marker LED Clearance Lights, 14X Double Bullseye 7 Red & 7Amber 12 LED Side Marker Light Indicator 4x2 Inch Tiger Eye Surface Mount Taillights for Vehicles Truck RV Camper

ENERGY EFFICIENT & Multifunction Trailer Light: Designed with 12 super-bright colored LEDs behind colored diffused polycarbonate housing and acrylic lens for true to color, improved visibility. 2" x 4" Mini trailer clearance lights for you to upgrade your lights in several minutes, for more convenient and stable installation..
The Trailer Side Marker Light Indicator light can work as side marker lights, led clearance marker lights, rv yellow marker lights, clearance lamps and indentification lamps, trailer lights, and truck clearance lights etc. Ultra bright but energy-efficient, provides reliable visibility and safety even in inclement weather. Ideal for most 12V heavy trucks like RV, Trailers, Campers, Peterbilt, Freightiner, Kenworth etc., can improve safety give your car a new look..
Tiger Eye Double Bubble LED Marker Lights adopts 12pcs of Super bright LED provide maximum visibility & safety. The light Lens Adopted reflecting mirrow principle making, which can make better lighting, and more durable. With the Snap-on Reflectors Lens make more functional during using..
Waterproof: Waterproof rate IP67, effectively protects the tail light from dust, sand, moisture, rain and other impact of inclement weather. Each lens is sonically welded to the housin....

Check Stock

CURT 56056 Vehicle-Side Custom 4-Pin Trailer Wiring Harness, Fits Select GMC Acadia

EASY TO INSTALL. No cutting! No splicing! This trailer wiring harness kit plugs into existing factory wiring on your vehicle and equips it with a standard, rear 4-pin trailer wiring connector for plugging in and towing a trailer.
STANDARD CONNECTOR. This plug-in 4-flat trailer wiring can be used to connect trailer tail lights, brake signal lights and turn signals. 4-way trailer light wiring is popular on a variety of trailers, adding versatile towing options for your vehicle.
VEHICLE-SPECIFIC. This aftermarket, vehicle-trailer wiring harness is designed for select years of the GMC Acadia.
EASY GRIP. Plugging in your trailer wiring and trailer lights is easy with the ergonomic design of this vehicle socket. It features tabs on the top and bottom for a better grip when plugging into your trailer or unplugging.
DUST COVER. To promote long-lasting use and weather resistance, this 4-pole trailer lighting wire harness comes with a rubber dust cover. It easily fits onto the 4-way flat connector when not in use, protecting it against the outdoor elements.

Check Stock

HPX LED Trailer Marker Side Lights: 20 Pcs Side Marker Lights 2.5 Inch 2 Diode RV Lights Exterior Fender Marker Lights Oval Trailer Running Lights for Truck RV Boat Camper Trailers

【Package Contents】You will receive 10 Amber+10Red 2.5 Inch Oval trailer lights 2 LED diodes, screws are included for mounting.The quantities and colors are sufficient for you to use and replace, and can easily meet your daily use..
【Easy to Install】The trailer marker lights has two screw holes, which can be installed in any position on the outside plane of the car. Black is the Negative and the other color is the Positive. Just the holes are punched and the two wires of the side lamp are connected to the power supply system of the car..
【Specification】The size of the trailer side marker lights is 0.78"" x 1.1"" x 2.5"", the center to center dimension between the screw holes: 1.89"" .These oval marker lights are the exact same size as the light on a camper..
【Quality Materials】The boat trailer lights is made of high quality ABS plastic mask, bright and durable in use, which are designed with totally enclosed circuit, waterproof and can keep away from dirt..
【Application】The trailer lights led kit can be function as Side Marker Lights, Clearance Lamps and Indentification Lamps, Trailer Lights, camper marker lights, led clearance marker lights. Suitable for RV, Trailers, Campers, Motorcycle, Utility vehicle and Boat Lorry Bus etc..

Check Stock

CURT 57187 4-Way Flat Vehicle-Side to 5-Way Trailer Wiring Adapter

VERSATILE DESIGN. This trailer wiring adapter makes it easy to connect a mismatched vehicle socket and trailer plug, adapting your 4-way flat connector into a standard 5-way flat socket.
EASY GRIP. Plugging in your trailer wiring and trailer lights is easy with the ergonomic design of this trailer wiring adapter. It features grips on the sides for a better grip when plugging into the vehicle or unplugging.
STANDARD CONNECTION. This trailer hitch wiring adapter plugs into any standard 4-way flat and can be used to connect the taillights, brake lights, turn signals and reverse lights (some splicing required).
EASY TO INSTALL. This 4-pin to 5-pin trailer adapter wiring comes ready to plug into your vehicle or trailer wiring with minimal splicing required.
DURABLE CONSTRUCTION. For long-lasting use and a reliable connection, the housing of this trailer harness adapter is made from durable molded rubber that will never rust or corrode.

Check Stock