ReviewsTrailer Tow Hook

CURT 99308 Class 3 Trailer Hitch 2-Inch Receiver 4-Pin Wiring Harness Select Subaru Outback

  • COMPLETE KIT. This towing kit includes a class 3 hitch with hardware and a wiring harness to provide a complete kit for outfitting your vehicle for towing. Both the hitch and wiring are designed for select models of the Subaru Outback..
  • DEPENDABLE STRENGTH. This trailer hitch is rated for 4, 000 lbs. gross trailer weight and 600 lbs. tongue weight (limited to lowest-rated towing component)..
  • VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more..
  • RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid Bonderite and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays..
  • EASY TO INSTALL. No cutting! No splicing! The trailer wiring harness in this kit plugs into existing factory wiring on your vehicle and equips it with a standard 4-pin trailer wiring connector for plugging in and towing a trailer. It connects the taillights, turn signals and brake lights..
Check Stock

Tekonsha ZCI™ Zero Contact Interface Universal ModuLite® & Installation Kit

  • Activates a trailer's stop/turn/tail/running lights without cutting or splicing into your vehicles wiring system - simply snap on included current sensors.
  • Use when: trailer has more than 1 light assembly per side and is equipped with multiple clearance or running lights.
  • if tow vehicle may tow a variety of trailers.
  • Re-settable short circuit/overload protection - guards itself and the tow vehicle from shorts and wiring install mishaps.
  • rated at 4.2 amps for turn/stop circuits, 7.5 amps for taillight circuit.
  • Works on all vehicle types including standard, PWM and/or multiplex systems, ensuring full brightness of the trailer lights during operation.
  • ZCI sensor technology and direct connection to the tow vehicle battery, eliminates all electrical connection and interference with the tow vehicle electrical system.
  • Isolates trailer light operation from tow vehicle's electrical system.
  • 5 amps for taillight trailer circuits. Works with low side Switched vehicles.
Check Stock

KAITWOSON Trailer Hitch Tri Ball Mount with Hook & Pin, 1-7/8,2,2-5/16-inch Hitch Balls, Fits 2-inch Receiver

  • SPECIFIC DATA. The trailer hitch ball mount made of welded steel, 2-inch by 2-inch shank hollow handle, 3 hitch balls and a hitch hook, need 5/8-inch pin, 8-inch overall length.
  • PRODUCT PARAMETERS. Three hitch ball sizes:1-7/8, 2, 2-5/16. Choose from a range of towing capacities: 2,000 lbs., 6,000 lbs. or 10,000 lbs, the hook capacities is 10000lbs. This trailer hitch ball device provides reliability for your towing settings.
  • CORROSION PROTECTION. The product is protected with long-lasting black powder coating which can resist all kinds of corrosive substances. These topcoats resist rain, dust, snow and other corrosive substances.
  • EASY INSTALLATIONS. Hitching up your trailer is easy with this ready-to-use trailer hitch tri ball mount.The round handle makes mounting easy and just insert the handle into the 2-inch trailer hitch receiver of the vehicle.
  • READY TOWING. It comes with 3 way tow ball and a hook for ready coupling and a trailer hitch pin to securely mount onto your hitch receiver, words under cars, light trucks, SUVs, vans, ATVs and more.
Check Stock

CURT Class 3 Trailer Hitch Bundle with Wiring for 2014-2016 Toyota Highlander - 13200 & 56217

  • COMPLETE KIT. This towing kit includes a class 3 hitch with hardware and a wiring harness to provide a complete kit for outfitting your vehicle for towing. Both the hitch and wiring are designed for select models of the Toyota Highlander..
  • DEPENDABLE STRENGTH. This trailer hitch is rated for 6, 000 lbs. gross trailer weight, 900 lbs. tongue weight, 8, 000 lbs. weight distribution capacity and 900 lbs. weight distribution tongue weight (limited to lowest-rated towing component)..
  • VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more..
  • RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid Bonderite and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays..
  • EASY TO INSTALL. No cutting! No splicing! The trailer wiring harness in this kit plugs into existing factory wiring on your vehicle and equips it with a standard 4-pin trailer wiring connector for plugging in and towing a trailer. It connects the taillights, turn signals and brake lights..
Check Stock

Curt 13068 55336 Class 3 Trailer Hitch and Wiring Kit for Honda Odyssey

  • COMPLETE KIT. This towing kit includes a class 3 hitch with hardware and a wiring harness to provide a complete kit for outfitting your vehicle for towing. Both the hitch and wiring are designed for select models of the Buick Enclave, Chevrolet Traverse and GMC Acadia..
  • DEPENDABLE STRENGTH. This trailer hitch is rated for 5, 000 lbs. gross trailer weight, 500 lbs. tongue weight, 6, 000 lbs. weight distribution capacity and 600 lbs. weight distribution tongue weight (limited to lowest-rated towing component)..
  • VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more..
  • RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid Bonderite and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays..
  • EASY TO INSTALL. No cutting! No splicing! The trailer wiring harness in this kit plugs into existing factory wiring on your vehicle and equips it with a standard 4-pin trailer wiring connector for plugging in and towing a trailer. It connects the taillights, turn signals ....
Check Stock

5/16\ G70 Clevis Slip Hook with Safety Latch, 4 Pack Heavy Duty Slip Hook for Trailer Truck Transport Tow Chain Hook

  • HEAVY DUTY CLEVIS SLIP HOOK - 5/16 inch G70 Clevis Slip Hook is Designed for Making Quick Connections with Chain in Industrial and Construction Applications, Exclusive Design and Spring-loaded Safety Latch Help Ensure Secure Attachment..
  • SAFETY LATCH FOR QIUCK RELEASE - Hook Pin and Cotter Pin Provide an Easy, Secure Attachment to Safety Chain ,This Clevis Slip Hook is Equipped with a Spring-loaded Latch for Secure Attachment and Quick Release as Needed, 5/16" Diameter Pin..
  • EFFICIENT PERFORMANCE SLIP HOOK - When Attaching Safety Chains, the Chains Should be Cross Underneath the Trailer Coupler, and Each Hook and Chain must be Rated to Meet or Exceed the Gross Weight of the Trailer..
  • 4PCS 5/16" G70 CLEVIS SLIP HOOK - This 5/16 inch clevis slip hook with safety latch widely used in trailers, flatbed trailers, truck, crane, tractor, transport tow Winch hook trailer, etc..
  • MEETING YOUR REQUIREMENT - To promotes long-lasting use and dependable strength for miles to come, this clevis hook is finished with a durable zinc plating. It resists rain, dirt, snow, mud and other corrosive elements..
Check Stock

CURT 99310 Class 3 Trailer Hitch 2-Inch Receiver 4-Pin Wiring Harness Select Honda Pilot

  • COMPLETE KIT. This towing kit includes a class 3 hitch with hardware and a wiring harness to provide a complete kit for outfitting your vehicle for towing. Both the hitch and wiring are designed for select models of the Honda Pilot..
  • DEPENDABLE STRENGTH. This trailer hitch is rated for 6, 000 lbs. gross trailer weight, 900 lbs. tongue weight, 8, 000 lbs. weight distribution capacity and 900 lbs. weight distribution tongue weight (limited to lowest-rated towing component)..
  • VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more..
  • RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid Bonderite and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays..
  • EASY TO INSTALL. No cutting! No splicing! The trailer wiring harness in this kit plugs into existing factory wiring on your vehicle and equips it with a standard 4-pin trailer wiring connector for plugging in and towing a trailer. It connects the taillights, turn signals and brake lights..
Check Stock

Camco Rhino Heavy Duty 21 Gallon Portable Waste Holding Hose and Accessories-Durable Leak Free and Odorless RV Tote Tank (39002) , Gray

  • Transports Waste from Your RV/Trailer: Allows you to transport waste from your RV or trailer to a dump station.
  • Ideal for when you're parked too far away for an RV sewer hose.
  • Includes: (1) 21 gallon tote tank, (1) large, durable handle, (2) oversized wheels, (1) tank rinser, (1) ladder hook, (1) 3-foot, super heavy-duty sewer hose with swivel bayonet and lug fittings, (1) 15-inch female to female orange Rhino grey water hose, (1) clear elbow with a 4-in-1 adapter, (1) clear double bayonet elbow, (3) storage caps, (2) caps with lanyards for rinse connections and (1) steel tow adapter Easy to Transport: Large, heavy-duty, no-flat wheels with bearings make transport smooth and effortless. A removable steel tow adapter allows you to easily roll the tote tank like a suitcase, or tow it slowly behind a truck or golf cart.
  • Integrated Ladder Hook: Can sturdily clamp on to RV or camper ladder when not in use and the body of the tote tank features grooves to securely strap it in place.
  • Simple to Clean: The low drain hole ensures that the tote tank empties completely. The smooth interior is easy to wash off using the integrated tank rinser.
  • Measurements: Tote tank measures 20 ½-inches (L) x 13-inches (W) x 40-inches (H).
Check Stock

CURT 13364 56027 Trailer Hitch and Wiring Package

  • DEPENDABLE STRENGTH. This trailer hitch is rated for 6,000 lbs. gross trailer weight, 600 lbs. tongue weight, 10,000 lbs. weight distribution capacity and 1,000 lbs. weight distribution tongue weight (limited to lowest-rated towing component).
  • VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more.
  • FULLY TESTED. Every CURT class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Aftermarket hitches are tested according to SAE J684 standards for the utmost safety while hauling.
  • RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid A-coat and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays.
  • EASY TO INSTALL. This hitch offers a custom, factory fit on select model years of the Ford F150 and Lincoln Mark LT.
Check Stock

CURT Class 3 Trailer Hitch Tow Package with 2in Ball for 2007-2012 GMC Acadia

  • COMPLETE KIT. This towing kit includes a class 3 hitch with hardware and a wiring harness to provide a complete kit for outfitting your vehicle for towing. Both the hitch and wiring are designed for select models of the Buick Enclave, Chevrolet Traverse and GMC Acadia..
  • DEPENDABLE STRENGTH. This trailer hitch is rated for 5, 000 lbs. gross trailer weight, 500 lbs. tongue weight, 6, 000 lbs. weight distribution capacity and 600 lbs. weight distribution tongue weight (limited to lowest-rated towing component)..
  • VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more..
  • RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid Bonderite and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays..
  • EASY TO INSTALL. No cutting! No splicing! The trailer wiring harness in this kit plugs into existing factory wiring on your vehicle and equips it with a standard 4-pin trailer wiring connector for plugging in and towing a trailer. It connects the taillights, turn signals ....
Check Stock

CURT 99317 Class 3 Trailer Hitch, 2-Inch Receiver, 4-Pin Wiring Harness, Select Jeep Wrangler JK

  • COMPLETE KIT. This towing kit includes a class 3 hitch with hardware and a wiring harness to provide a complete kit for outfitting your vehicle for towing. Both the hitch and wiring are designed for select models of the Jeep Wrangler JK..
  • DEPENDABLE STRENGTH. This trailer hitch is rated for 3, 500 lbs. gross trailer weight, 350 lbs. tongue weight, 4, 000 lbs. weight distribution capacity and 400 lbs. weight distribution tongue weight (limited to lowest-rated towing component)..
  • VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more..
  • RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid Bonderite and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays..
  • EASY TO INSTALL. No cutting! No splicing! The trailer wiring harness in this kit plugs into existing factory wiring on your vehicle and equips it with a standard 4-pin trailer wiring connector for plugging in and towing a trailer. It connects the taillights, turn signals and brake lights..
Check Stock