ReviewsTrailer Winch With Brake

BANG4BUCK 2 Packs 2 Inch X 20 Feet Winch Straps Cable Tow Strap Lines with Durable Hooks for ATV Jet Ski Trailer Boat Cars - Breaking Strength 10000 lbs

  • ✔2 Packs Winch Straps - made by heavy duty polyester, performs stronger and provides a more consistent pulling force than polypropylene. Metal snap hook (on one end of strap) is coated for anti-rust, corrosion resistance and weather protection.
  • ✔Universal Dimension Size - this marine trailer winch strap is 2 inch wide and 20 feet long.
  • Maximum work load is 3300 lbs, while breaking strength is around 10,000 lbs..
  • ✔Durability: Classic woven pattern for added durability and protects the strap edges from abrasion and wear off to ensure longevity.
  • ✔Easy Installation - you could just take the winch bracket pin out and slide the new strap in. Then rebolt to winch. Please kindly note that it doesn't come with the bolts or trailer studs accessories but the winch strap with hook, same as picture shown..
  • ✔Wide Application - replacement trailer winch strap with hook is widely used for boat, truck, Jet ski and car trailers, etc.
  • Ideal for towing vehicles in roadside emergency.
Check Stock

BUNKER INDUST Receiver Hitch Winch Cradle Mount Plate, Universal 2\ Trailer Hitch Winch Mounting Bracket for ATV UTV Truck

  • UNIVERSAL WINCH MOUNT PLATE---Winch mount bracketprovides a solid mounting place for your winch,allowing you to attach a winch to your ATV, UTV or truck.And pre-drilled winch mount fits most winches,installed according to your need.This winch plate is suitable for winches rated between 1,300 to 16,500 lbs.
  • STANDARD FIT---This receiver hitch winch mount plate is equipped with a standard 2-inch shank and has three mounting holes for an adjustable design, which fit any industry-standard 2-inch x 2-inch trailer hitch receiver (hitch pin not include)..
  • DURABLE CONSTRUCTION---Features a durable black powder coating, even put it outdoor or wet by rain for a long time, our winch mounting plate can be guaranteed not to rust easily and keep the original state.
  • PROTECT YOUR WINCH---This winch mounting plate is made of heavy duty steel, durable construction insures its long lifespan. It can hold the weight and serve as a shield, guarding your winch against rock damage and debris while you are blazing an off-road trail.
  • FRONT OR REAR MOUNTED---This trailer hitch accessory can be mounted on the front or rear of the vehicle, wherever a standard 2-inch receiver is properly installed.
Check Stock

VONLX Universal Trailer Hitch Winch Mounting Plate with 2" Receiver, Winch Bracket Winch Mounting Plate Fit for ATVs, UTVs, Lawn and Garden Equipment Winch Bracket Mounting Bracket

  • [Winch Mounting Bracket] Universal winch mount provides a stable mounting position for your winch. Suitable for a variety of applications: ATVs, UTVs, lawn and garden equipment, etc..
  • [Features] The winch mount comes with a standard 2" shank to fit all 2" trailer hitch receivers..
  • [Material] Made of high-quality heavy-duty steel, the surface of the winch mounting plate is sprayed with a durable black powder coating, our winch mounting plate is not easy to rust, anti-corrosion, and durable..
  • [Strong and Durable] The durable construction of this winch mounting plate ensures its long service life. Protect your winch from rock damage and debris collisions as you hit off-road trails. Universal winch mounts hold between 1,300 and 16,500 lbs..
  • [Easy to Install] This trailer hitch attachment can be installed on the front or rear of the vehicle. Installation is simple and convenient..
Check Stock

PROGRIP 03603 Truck and Trailer Heavy Duty Cargo Tie Down Winch Strap with Flat Hook, 30' x 4\ , Yellow

  • Cargo tie down strap with flat hook ideally used with a standard or weld on winch to aid in cargo tie down and transport.
  • Winch strap is made with yellow polyester webbing allowing resistance to UV rays, mildew, shrinkage, and stretching.
  • zinc plated flat hook provides corrosion resistance and a durable hook that won't bend.
  • Durable strap allows moving cargo to be safe and secure while easy to use with standard or weld on winch among other applications.
  • Simply place flat hook into desired area such as side of trailer or stake pocket, guide over cargo, tie remaining end securely to winch (not included), and create tension with winch as desired.
  • Truck and Trailer Cargo Tie Down Winch Strap with Yellow Polyester Webbing and Flat Hook measures 30' x 4" with a heavy-duty break strength of 15,000 lbs. and working load limit of 5,000 lbs..
Check Stock

KEEPER - 36” Winch Bar Chrome - Use with Bolt-On or Weld Style Deep Storage Winch

  • Winch Bar is designed to use with bolt-on or weld style deep storage winches to tighten the winch strap and release load binder.
  • Additional Features: Features a knurled non-slip handle and a tapered, angled grooved tip for a secured easy handling and operation.
  • Ease of Use: Winch bar has a tapered, angled end for easy operation.
  • Operation: Easily releases load binders and tension winches.
  • Compatibility: Compatible with Keeper model #04928 weld mount trailer winch and other standard weld mount trailer winches.
Check Stock

Electric 3 'Ram Ram'

  • EASY TO INSTALL. No cutting or splicing required! This vehicle-specific wiring harness allows fast, easy, plug-and-play trailer brake controller installation. Simply plug one end into your vehicle and the other into your CURT brake controller.
  • RELIABLE POWER. This brake controller wiring harness is constructed with quality 12-gauge wires to ensure consistent power between your trailer brake controller, vehicle and electric trailer brakes.
  • VEHICLE-SPECIFIC. This electrical brake controller wiring fits select model years of the Ram 1500, 1500 Classic, 2500, 3500, 4500 and 5500 (without factory integrated brake controller - ITBC).
  • VERSATILE USE. This trailer brake controller wiring kit is compatible with any CURT trailer brake controllers equipped with a quick plug connector -- proportional, inertia and time delay. It also features a 24-inch length for flexible positioning.
  • PROTECTED WIRES. To keep power flowing and ensure your connection stays well-protected, this trailer brake controller harness comes with a slit-loom sleeve, helping to keep the wires bundled, avoid crushing and resist abrasions.
Check Stock

Reese Towpower CompactIQ Trailer Brake Controller, Proportional, 1 to 3 Axles

  • RELIABLE SAFETY. The Discovery electric trailer brake controller offers safe, dependable operation, increasing trailer brake pressure as you depress the vehicle brake pedal and bringing the vehicle and trailer to a smooth stop.
  • EASY TO USE. This trailer brake controller features an easy-to-read, digital display to monitor brake operation. It also has a simple, reliable design with no internal moving parts and no leveling required.
  • POWERFUL. The simple controls of the Discovery brake controller enable powerful brake operation, featuring a manual brake slider button, an adjustable power toggle and adjustable ramp time.
  • VERSATILE. You can use this electric trailer brake controller on virtually any trailer with 1 to 4 axles (2 to 8 brakes). Compatible with low-volt, PWM, ABS, cruise control and electric over hydraulic.
  • SIMPLE SETUP. This electric brake controller quickly plugs into your vehicle using a CURT vehicle-specific quick plug harness (sold separately). It comes with an adjustable mounting bracket and can be mounted at any angle.
Check Stock

CURT 51120 Discovery Electric Trailer Brake Controller Time-Delay black

  • RELIABLE SAFETY. The Discovery electric trailer brake controller offers safe, dependable operation, increasing trailer brake pressure as you depress the vehicle brake pedal and bringing the vehicle and trailer to a smooth stop.
  • EASY TO USE. This trailer brake controller features an easy-to-read, digital display to monitor brake operation. It also has a simple, reliable design with no internal moving parts and no leveling required.
  • POWERFUL. The simple controls of the Discovery brake controller enable powerful brake operation, featuring a manual brake slider button, an adjustable power toggle and adjustable ramp time.
  • VERSATILE. You can use this electric trailer brake controller on virtually any trailer with 1 to 4 axles (2 to 8 brakes). Compatible with low-volt, PWM, ABS, cruise control and electric over hydraulic.
  • SIMPLE SETUP. This electric brake controller quickly plugs into your vehicle using a CURT vehicle-specific quick plug harness (sold separately). It comes with an adjustable mounting bracket and can be mounted at any angle.
Check Stock

3000lbs Boat Trailer Winch Heavy Duty Hand Winch With Strap And Hook Hand Crank Winch Boat Winches For Trailers Black

  • Size -- The boat winch body size (L x W x H): 4.7 x 3.2 x 4.5in/12 x 8.2 x 11.5cm.
  • Strap length 26.2ft/8m. Strap width: 2in/50mm.
  • High-Quality Trailer Winch -- Heavy duty A3 steel construction, hardened steel gears for maximum strength and longevity.
  • Heavy Duty Hand Winch -- Wear-resistant and high tensile Polyester strap, gear ration 4:1/8:1, the hand crank winch can support up to 3000lbs, strong....
  • Two-Way Ratchet -- Mooring hook equipped with a safety paw, the ratchet along to work in both directions (forward and reverse), locks for forward and....
  • Wide Application -- Portable boat trailer winch, easy to mount and move, can be used to drag boats, volleyball net, trailering, loading boats,....
Check Stock

CURT 51110 Venturer Electric Trailer Brake Controller Time-Delay Black

  • RELIABLE SAFETY. The Venturer electric trailer brake controller offers safe, dependable operation, increasing trailer brake pressure as you depress the vehicle brake pedal and bringing the vehicle and trailer to a smooth stop.Fit Type: Universal Fit.
  • EASY TO USE. This trailer brake controller features an easy-to-read, ramp-up LED display to monitor brake operation. It also has a simple, reliable design with no internal moving parts and no leveling required.
  • POWERFUL. The simple controls of the Venturer brake controller enable powerful brake operation, featuring a manual brake slider button, an adjustable power toggle and adjustable ramp time.
  • VERSATILE. You can use this electric trailer brake controller on virtually any trailer with 1 to 3 axles (2 to 6 brakes). It is also fully compatible with cruise control, anti-lock brakes, low-voltage systems and PWM systems.
  • SIMPLE SETUP. This electric brake controller quickly plugs into your vehicle using a CURT vehicle-specific quick plug harness (sold separately). It comes with an adjustable mounting bracket and can be mounted at any angle.
Check Stock

Curt 51110 51383 Venturer Brake Control and Wiring Harness Kit

  • SIMPLE TO INSTALL. This universal wiring harness allows for simple, straightforward trailer brake controller installation. It comes with blunt-cut wires to splice into your vehicle's existing wiring.
  • RELIABLE POWER. This brake controller wiring harness is constructed with quality 12-gauge wires to ensure consistent power between your trailer brake controller, vehicle and electric trailer brakes. The wires are also color-coded.
  • UNIVERSAL. This brake controller wiring is made for universal application, allowing you to splice your CURT brake controller into a variety of vehicles. Vehicle-specific wiring harnesses are also available (sold separately).
  • VERSATILE USE. This trailer brake controller wiring is compatible with any CURT trailer brake controller equipped with a quick plug connector. It also features a 24-inch length for flexible positioning of the brake controller on the dash.
  • PROTECTED WIRES. To keep power flowing and ensure your connection stays well-protected, this trailer brake controller harness comes with a slit-loom sleeve, helping to keep the wires bundled, avoid crushing and resist abrasions.
Check Stock