ReviewsTransient Voltage

uxcell 10Pcs Voltage Dependent Resistors AC 210V 10D331K Radial Lead Disc Varistors

Over discharge voltage range: 2.3-3.0v ± 0.05v.
Wiring:(please check the picutre 3 wiring diagram)Strictly according to the diagram wiring: 0V(B )3.7V(B1)7.4V(B2)11.1V(B+), Do not deliberately short circuit. After the line is connected, Need to charge first, then have output..
When the battery is connected in series with 3 groups, Please ensure that the voltage of each battery is the same. If not same, please fill in each set of batteries and then use. Do not mix the good battery and the battery..
Attention: Do not mix the good battery and poor battery to use. The internal resistance of 3 battery capacity are closer will be better..

3 string 40A lithium lipo battery protective board module.
Continuous Discharge Current (upper limit): 40A(If the cooling environment is not good, please reduce the use of load current.).
Size: About 41x55x3.4mm/1.6×2.2×0.13″.
Scope: Nominal voltage of 3.6V, 3.7V lithium battery(including 18650, 26650, lithium polymer battery).

✔【FAST AND ACCURATE RESPONSE】-----This 3044196 electronic speed controller with full closed-loop control technology, it is the moment to load changes with fast and accurate response to control engine speed, when connected to the matching EFC Series electric actuators and magnetic speed sensor signal , can be perfectly controlled engine..
✔【PREVENT REVERSE VOLTAGE】-----In the design, it is easy to install and can be pre-adjustments, including adjusting the idle speed and work, to assist for input multiple machines or special purpose machines, as well as to prevent reverse battery voltage, transient voltage pulse implementation of the short-circuit fault and security in case of loss of speed sensor signal or power supply and so on..
✔【FULL CLOSED-LOOP CONTROL】-----High quality 3044196 electronic speed controller, stable performance. Full closed-loop control technology. Fast and accurate response to control engine speed.
✔【EASY TO INSTALL & PRE-ADJUST】-----It is easy to install and can be pre-adjustments. For input multiple machines or special purpose machines..
✔【OPERATING FREQUENCY OF 3800HZ】-----The above performance parameters are measured at the operating frequency of 3800Hz..

3-1/2 digit (2000 count) high performance digital multimeter with a large backlit LCD display.
Measurements include AC/DC Voltage, Current, Resistance, Continuity, Diode Test, Capacitance, Temperature, Frequency, and DATA Hold function.
Rubberized housing provides impact and drop resistance.
Industry leading CAT IV design provides superior resistance to damage from transient over voltages.

✅【2 in 1 HF START】TIG200 is high frequency(HF) ignition, stable arc,simple to operate. The conversion efficiency of the whole machine is increased by more than 30%..
✅【IGBT INVERTER】Use the single tube IGBT (the inverter frequency can reach 25-50KHz) to convert 50/60Hz to dc and then to high frequency and lower voltage,portable only 12.54 lbs, 13x6.3x11.4" size !.
✅【2T & 4T 】2T(Manual) / 4T(Semi-auto) switch is available, you can release your finger for long time welding job when on 4T. 2T is suitable for the re-tack welding, transient welding or thin plate welding. 4T is suitable for welding medium thickness plates..
✅【SAFETY and ENERGY SAVING】Automatic Compensation with Voltage Fluctuation, Over-voltage protection, Under Voltage Protection, Over Current Protection, Over Load Protection,Fan dormancy..
✅【EXCELLENT WELDING PERFORMANCE】 Tig welding thickness 0.5-5.0mm under 10-200A output.
application of tungsten electrodes diameter: 1.0/1.6/2.0/2.4/3.0mm. Suitable for welding different metals such as steel, stainless steel, carbon steel etc. (Can’t weld aluminum). ARC welding thickness 2.0-8.0mm under 20-150A current , application of electrodes diameter: 2.5/3.2mm..

Protects expensive HDTV receivers, DVRs, cable modems, etc. from potentially damaging surges..
Unique In-Line design is virtually transparent to all analog or digital signals from DC to 1GHz..
Provides superior protection against high and low voltage transient surges..
Protection element is designed to reset after each surge event, with a service life of up to 1500 surges..
5-year warranty when purchased from an Authorized TII Dealer. Warranty not valid when purchased through other outlets..

【8 IN 1 Function USB Wall Outlet】- 5 AC outlet extender (3 sides, 125V, 15A, 1875W) with 3 USB (1 USB C) fast charging ports, 1800 joules surge....
【USB- C Fast & Smart Charging】- Build in smart IC charging technology, multi plug outlet can automatically detect charging devices and deliver....
【1800J Surge Protector】- Three complementary Surge Protection Circuits, TVS(transient voltage suppressor), MOV(metal oxide varistor), GDT(gas....
【Wide spaced Outlets】- With 3-sided Power Strip design, 5 AC outlets with long space in between, larger than other traditional standard socket.....
【Super Safety】- ETL certified. This power strip has overload protection, short-circuit protection, over current protection, over-voltage....

...er optimal charging speed automatically, compatible with most USB devices. NOTE: The UCB-C port doesn't support any other devices which need 14~22V charging voltage.
【8AC Surge Protector Outlets】- The 3 level complementary Surge Protector Circuit which composed of TVS (transient voltage suppressor), MOV (metal oxide varistor), GDT (gas discharge tube), with minimum 2700 Joules energy absorbing capacity, could protect your devices much more quickly and reliably than other brand’s 1 level MOV Surge Protection Circuits..
【Safety and Certificate】- ETL safety certified, with extension cord and other major components certified by UL. The over current protection switch limits the power strip's working current to certain setting, so it will not get hot during usage. Environmental protection and fire-resistance PC shell with flame retardant at 1382℉ makes it more durable and longer lifetime..
【What You Get】- Nuetsa Power strip, Maunal, 30-day return, our worry-free 24-month, and reliable customer service will respond to you within 24 hours..