ReviewsTransimitter Receiver

FAN-18R Ceiling Fan Receiver for Hampton Bay Hunter Harbor Breeze KUJCE9103 FAN-35T FAN-53T Fan-HD5 FAN-11T CHQ7078T

  • FAN18R ceiling fan remote control receiver is specially designed for Hampton Bay Harbor Breeze Hunter Monte Carlo fan UC7078T FAN-35T FAN-53T Fan-HD5 FAN-11T CHQ7078T KUJCE9103 FAN-35T1 UC7030T.It replaces for 28R FAN18R 18R..
  • The rated power of this receiver is 240W, and this FAN-18R receiver work at radio frequency 303.9MHz. The superior rated power capacity carrying allows you to access more light bulbs, greatly extend the service life..
  • This receiver can control the ceiling fan speed(HI, MED, LOW, OFF) and light brightness(ON,OFF,DIMMING). Especially 18R receiver is compatible with incandescent light bulbs and dimmable LED/CFL lamps.If your LED lights are non-dimmable, light dimmer only supports the ON/OFF function in that case..
  • This receiver is easy to install. If your ceiling fan has a rod, you can simply detach the canopy and drop it down the rod to replace the receiver.If your ceiling fan is a ceiling mount- you have to detach the whole fixture, including the canopy, to replace, or install the receiver..
  • If you have any questions, please contact us. We are proud to offer 2....
Check Stock

Pyle-Pro PDWM2550 19'' Rack Mount Dual VHF Wireless Rechargeable Handheld Microphone System

  • Professional VHF 2 Channel Wireless System - 2 Handheld Microphones Included - Dual Telescoping Receiver Antennas - Dual Volume Controls with Digital Readout - Dual Charging System - 1/4'' Individual line outputs & Mixed 1/4'' Outputs.
  • On/Off Broadcasting Switch - Dynamic Range: 100dB.
  • Signal to Noise Ratio: 105dB - Receiver Power Supply: AC 110/240V - Microphone Power Source: 8. 4 Volt Rechargeable.
  • Receiver Dimensions: 1. 8'' X 18. 9'' X 1. 3'' - Microphone Dimensions: 9. 6'' X . 7" X 0. 5''.
  • Professional VHF 2 Channel Wireless System - 2 Handheld Microphones Included - Dual Telescoping Receiver Antennas.
  • Dual Volume Controls with Digital Readout - Dual Charging System - 1/4" Individual line outputs & Mixed 1/4" Outputs.
  • Frequency Response: 40Hz~18 kHz - Operation Range: 50-180 Meters.
  • Signal to Noise Ratio: 105dB - Receiver Power Supply: AC 110/240V - Microphone Power Source: 8.4 Volt Rechargeable.
  • On/Off Broadcasting Switch - Carrier Frequency: 210-270Mhz - Dynamic Range: 100dB.
Check Stock

Craftsman Receiver 315 MHz 139.53855 LiftMaster 365LM Includes 26ft Wire

  • This Receiver is compatible with these Remote Models LiftMaster 371LM 372LM 373LM and 377LM Keypad (sold separately) Craftsman 139.53753 (sold separately) 315 MHz remotes.
  • 315 MHz Receiver (Includes Wire), Part 139.53855, (remote sold separately).
  • Receiver plugs into standard household outlet inside garage to accept signal from 3-Function Remote Control 139.53753 (sold separately)..
  • Craftsman 315 MHz Receiver Brand NEW, Genuine Craftsman Product.
  • Receiver transmits a brand new security code, one of over 100-billion codes, never to be repeated, for use with Craftsman 315 MHz Remote (sold separately).
Check Stock

Motion Sensor Alarm - Seanme Wireless Driveway Alarm 100m Long Distance Signal Transmission, Home Security Alarm System Motion Sensor Doorbell with 38 Chime Tunes (1 reciver and 2 Sensor)

  • ✅ LONG RANGE CONNECTIION-Working Range up to 328 feet (100 meters) between receiver and transmitter allowing you to place it a good distance from the receiver to warn you of arrival and departure of family members, unwanted guests or solicitors, or anyone who visits your home or business..
  • ✅ Easy, Fast, Wire Free Installation: Infrared sensor detects motion and sends a signal to the receiver. Chose from 38 Ringtones with Bright LED Light. Sensor is wall mountable..
  • ✅ Ideal for front doors, window frames, driveways, walking paths, and anywhere in your home you want to be alerted to motion. Also great to alert business owners that are working in the back, or out of sight, to customers entering their store.Please note that this not waterproof.Keep it away from rains or cover adequately..
  • ✅ Wireless Plug-in Receiver: The portable wireless plug-in receiver plugs into any standard outlet. The sensor uses 3 AAA batteries (Not Included). Detection time delay in between motion sensor alerts is configurable from 15 seconds to 30 seconds, just place the sensor at the entrance to your driveway and the receiver inside your home..
  • ✅ 2 Sensor and 1 Receiver- Receiver support to pair with multiple sensors, Sensors can be installed on different floors (roo....
Check Stock

CURT 49090 2-Inch x 9-Inch Weld-On Raw Steel Trailer Hitch Receiver Tube

  • STANDARD FIT. This hitch receiver tube features industry-standard inside dimensions, able to accept virtually any 2-inch x 2-inch shank, including a trailer hitch ball mount, tow hook or other receiver hitch accessories.
  • HIGH-STRENGTH. This receiver tube is constructed from quality steel to offer dependable strength.
  • REINFORCED COLLAR. To maximize strength at the opening, this hitch tube receiver is fitted with a 1/2-inch reinforcement collar.
  • READY TO WELD. This weld-on hitch receiver comes with a raw steel finish to allow you to weld it into place right out of the package. It can be used for custom towing systems, workshop builds or other weld projects.
  • PRE-DRILLED. For convenience, this weld-on trailer hitch receiver tube comes with a pre-drilled hole to readily accept a trailer hitch pin.
Check Stock

CURT 49240 2-Inch x 24-Inch Weld-On Raw Steel Trailer Hitch Receiver Tube

  • STANDARD FIT. This hitch receiver tube features industry-standard inside dimensions, able to accept virtually any 2-inch x 2-inch shank, including a trailer hitch ball mount, tow hook or other receiver hitch accessories.
  • HIGH-STRENGTH. This receiver tube is constructed from quality steel to offer dependable strength.
  • REINFORCED COLLAR. To maximize strength at the opening, this hitch tube receiver is fitted with a 1/2-inch reinforcement collar.
  • READY TO WELD. This weld-on hitch receiver comes with a raw steel finish to allow you to weld it into place right out of the package. It can be used for custom towing systems, workshop builds or other weld projects.
  • PRE-DRILLED. For convenience, this weld-on trailer hitch receiver tube comes with a pre-drilled hole to readily accept a trailer hitch pin.
Check Stock

CURT 49120 2-Inch x 12-Inch Weld-On Raw Steel Trailer Hitch Receiver Tube

  • STANDARD FIT. This hitch receiver tube features industry-standard inside dimensions, able to accept virtually any 2-inch x 2-inch shank, including a trailer hitch ball mount, tow hook or other receiver hitch accessories.
  • HIGH-STRENGTH. This receiver tube is constructed from quality steel to offer dependable strength.
  • REINFORCED COLLAR. To maximize strength at the opening, this hitch tube receiver is fitted with a 1/2-inch reinforcement collar.
  • READY TO WELD. This weld-on hitch receiver comes with a raw steel finish to allow you to weld it into place right out of the package. It can be used for custom towing systems, workshop builds or other weld projects.
  • PRE-DRILLED. For convenience, this weld-on trailer hitch receiver tube comes with a pre-drilled hole to readily accept a trailer hitch pin.
Check Stock

CURT 49180 2-Inch x 18-Inch Weld-On Raw Steel Trailer Hitch Receiver Tube

  • STANDARD FIT. This hitch receiver tube features industry-standard inside dimensions, able to accept virtually any 2-inch x 2-inch shank, including a trailer hitch ball mount, tow hook or other receiver hitch accessories.
  • HIGH-STRENGTH. This receiver tube is constructed from quality steel to offer dependable strength.
  • REINFORCED COLLAR. To maximize strength at the opening, this hitch tube receiver is fitted with a 1/2-inch reinforcement collar.
  • READY TO WELD. This weld-on hitch receiver comes with a raw steel finish to allow you to weld it into place right out of the package. It can be used for custom towing systems, workshop builds or other weld projects.
  • PRE-DRILLED. For convenience, this weld-on trailer hitch receiver tube comes with a pre-drilled hole to readily accept a trailer hitch pin.
Check Stock

CURT 49060 2-Inch x 6-Inch Weld-On Raw Steel Trailer Hitch Receiver Tube

  • STANDARD FIT. This hitch receiver tube features industry-standard inside dimensions, able to accept virtually any 2-inch x 2-inch shank, including a trailer hitch ball mount, tow hook or other receiver hitch accessories.
  • HIGH-STRENGTH. This receiver tube is constructed from quality steel to offer dependable strength.
  • REINFORCED COLLAR. To maximize strength at the opening, this hitch tube receiver is fitted with a 1/2-inch reinforcement collar.
  • READY TO WELD. This weld-on hitch receiver comes with a raw steel finish to allow you to weld it into place right out of the package. It can be used for custom towing systems, workshop builds or other weld projects.
  • PRE-DRILLED. For convenience, this weld-on trailer hitch receiver tube comes with a pre-drilled hole to readily accept a trailer hitch pin.
Check Stock

Beastron 24V/2.4GHz Wireless Video Transmitter and Receiver for Vehicle Backup Camera/Front Car Camera

  • Beastron 100% brand new Wireless RCA Video Transmitter & Receiver Kit for Car Rear View Camera. Note: Input DC 9-35V..
  • Easy to install: the receiver connect to monitor. The transmitter connect to rear camera..
  • Wireless RCA video receiver/transmitter which avoid complicated wiring. Mainly used for wireless connection on vehicles for video output to monitor, head unit, DVD player and camera, etc..
  • Stable wireless transmission of video signals at a longer distance.Receiver/transmitter distance: 100m (in jam-free open areas)..
  • Note: same frequency band equipments around the device may cause interference, please try to keep the transmitter and receiver antennas away from the shielding material..
  • High power RCA wireless video transmitter and receiver for wireless backup camera system for trucks, vans, buses, trailers, campers and road-construction machines..
Check Stock

Wireless Dog Fence 2023 Upgraded Pet Containment System, Adjustable Control Range 100-2000 Feet, Adjustable Warning Strength, Wireless Fence Harmless for All Dogs, Waterproof Reflective Stripe Collar

  • ... The intensity of the shock can be adjusted. The product is specially designed with 3 strengths of electric shock, which can be selected according to the size of the dog and the length of the hair..
  • When the dog goes out of the signal range of the transmitter, the receiver will issue a warning. Warning method: first, vibrate for 3-5 seconds, then static electric shock for 3-5 seconds. If the dog does not return to the safe area after working in a cycle twice, the receiver will keep sounding a warning tone until the dog returns to the safe area..
  • The latest technology, pending a US patent: receiver could not electric shock the dogs when the transmitter turns off. The specially designed function of receiver could not electric shock the dogs when the transmitter turns off in order to avoid the receiver could not receive the signal then over-warming dogs of prolonged shocks. Only the submission and receiver are turn on and be used at the same time, the receiver will not start warning until it is out of range of the transmitter..
  • Using two way radio frequency technology,the electric quantity of receiver was accepted by ....
Check Stock