ReviewsTransmission Cooler With An 8 Fittings

Aircast DonJoy Cryo/Cuff Cold Therapy Non-Motorized Gravity-Fed Cooler with Tube Assembly

  • An integrated approach to cold therapy that provides cold and focal compression using a non-motorized, gravity-fed system.
  • Delivers chilled water directly into a Cryo/Cuff that is anatomically designed to provide maximum cryotherapy, eliminating the risk of tissue damage.
  • Gravity Cooler holds water and ice needed to provide 6 to 8 hours of cryotherapy.
  • Compatible with all Cryo/Cuff and Arctic Flow pads.
  • Ideal for minimizing hemarthrosis, swelling, managing pain, post-operative recovery, trauma, rehabilitation and sports injuries.
  • Aircast Cryo/Cuff Gravity Cooler includes tube assembly, plastic fittings and an insulation disk.
Check Stock

Transmission Oil Cooler LPD47391 Low Pressure Drop Trans Cooler 40000 GVW OC-4739-1 LPD-4739-1 with Mounting Hardware (Silver)

  • Fitment:LPD47391 Advanced Cooling Protection for Car, Van, Light Truck, R.V. and Towing Applications.Suitable for applications up to 40,000lbs Gross Vehicle Weight.
  • High-Quality: Precise fin Spacing.Reliable, Durable Brazed Aluminum Construction..
  • Function:Self-regulating flow for maximum lube flow protection through cold start-up, varied temperatures and driving conditions, heavy loads and towing.
  • Package included: Transmission Oil Cooler,Bolts, nuts, washers, mounting straps, Brass fittings, high-quality cooler hose,hose clamps(No installation instructions).
  • NOTE: This kit is NOT intended for operation below 32 degrees Fahrenheit.
Check Stock

Dorman 624-548 Transmission Oil Cooler Line for Select Subaru Models

  • Upgraded replacement – this transmission oil cooler line is made of stainless steel for increased durability.
  • Application specific – made to match the fit the function of the original line on certain Subaru Forester and Impreza model years.
  • Complete repair – comes with fittings and brackets attached for installation.
  • Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience.
  • Ensure fit – to make sure this part fits your exact vehicle, input your make, model and trim level into the Amazon Garage.
Check Stock

8AN 20FT Fuel Line Hose Kit with End Fittings Nylon Stainless Steel Braid Black 1/2' - 11.12mm ID (AN8)

  • 【Includes】The 8AN nylon and stainless steel braided CPE fuel line kit includes: 10pcs 8an CPE hose ends (4 x Straight Swivel Hose Ends, 2 x 45 Degree Swivel Hose Ends, 2 x 90 Degree Swivel Hose Ends, 2 x 180 Degree Swivel Hose Ends) and 1/2 CPE braided fuel line (Length:20ft/6M).
  • 【Materials】The 8AN CPE fuel line Hose mostly used in cooler system and pump, fuel system, transmission system, Can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, coolant, fuel, and etc, but not applicable to E85..
  • 【Lifetime】The 8AN CPE hose working temperature range: -40℉ to 257℉ (-40℃ to 125℃). It is compatible with nearly every substance or agent used. Maximum Working Pressure (psi): 500 psi. Bursting Pressure (psi): 2000psi..
  • 【CPE Hose】The 8an CPE hose fitting is reused, just replaced a new olive/ferrule when reusing fittings with CPE hose. CPE tube is constructed with a seamless extruded CPE resin inner tube..
  • 【Warranty】Three months limited warranty & Free lifetime technical support..
Check Stock

(06-10) Duramax Transmission Lines/Hoses (5/8") XTREME-DUTY upgrade-LLY/LBZ/LMM - Allison Transmission Cooler Lines

  • Max Flow 5/8" ID lines for the hardest working trucks! Replacement 5/8" upgrade 2006-2010 Chevy,GMC 6.6L Duramax Transmission Lines. Includes (3) lines and all necessary fittings, zip ties, and easy to follow instructions..
  • 5/8" (larger I.D. for extra flow and cooling) DOUBLE Steel Braided w/abrasion resistant exterior (3X the protection to prevent against rub through or road hazards) - 4000 PSI (16,000 BPSI) Premium Hose - High Quality, crimped on, zinc plated (1) piece steel (not aluminum!) hose ends..
  • Designed and built in USA by CR Performance, a trusted USA manufacturer of the Duramax Transmission lines. We use quality hose and fittings and build for quality, not the cheapest price..
  • Lifetime Warranty & 24/7/365 support with quick response. See instructions for proper installation..
Check Stock

Dorman 624-551 Transmission Oil Cooler Line for Select Ford / Lincoln Models

  • Reliable replacement – this automatic transmission oil cooler hose is precision-engineered to replace the stock hose assembly on specific vehicles.
  • Quality construction – manufactured from metal and rubber with OE-style fittings to provide a reliable replacement.
  • Excellent value – OE quality at a lower price.
  • Vehicle tested – has undergone on-vehicle testing to ensure quality, proper fit and performance.
  • Ensure fit – to make sure this part fits your exact vehicle, input your make, model and trim level into the Garage.
Check Stock

Primecooling 4 Row All Aluminum Radiator for Chevy/GMC Blazer,C/K Series Pickup Truck More V8 Models 1973-91

  • Perfect Fit Compatibility - This radiator is compatible with 1978-1986 Chevrolet GMC C/K Series 10 20 30 1500 2500 3500 Pickup, 1981-91 Jimmy Blazer & 1983-91 P/R/V Series Vehicles, fits with many L6 V6 V8 models..
  • Extraordinary Quality - It is constructed of high quality full T-6061 aluminum construction to ensure an extremely long lasting operate life..
  • Max Cooling Performance - Come with 4 row radiator which can improve engine cooling efficiency by 35 - 45% temp, making stronger and higher capacity for coolant than stock..
  • Easy To Install - Direct bolt-on OE fitment or replacement for factory unit, fast and simple installation without any drilling or modification..
  • Necessary Fittings - Includes high-pressure cap and brass drain petcock, also more build-in trans oil cooler which fit auto or manual transmission models..
Check Stock

70" 6AN SS Braided Transmission Cooler Hose Lines,for 700R4 4L60 4L60E 4L65E 4L80E,Compatible with Ford C4/C6/AOD & GM Chevy 1996-2021

  • ...with Ford C4/C6/AOD & GM Chevy 1996-2021..
  • 【Function】:Improving the cooling efficiency of the vehicle's gearbox helps to avoid heat related faults and thus extends the service life of the equipment..
  • 【70" 6AN Transmission Cooler Lines Kit Includes】:Two stainless steel braided hoses with an inner diameter of about 70 inches and 3 / 8 inches.
  • Four an-6 flared to 1 / 4 inch NPT billet adapters.
  • Two an-6 flared to 3 / 8 "NPT billet adapters.
  • four 90 degree an-6 reverse flared to an-6 flared billet adapters, two aluminum 4l80e adapter accessories..
  • 【Superior Material】:The transmission cooler pipeline kit adopts high-quality 304 stainless steel braided PTFE hose, which has good protection effect, soft, tough and wear-resistant. It is not easy to leak when operating under high pressure..
  • 【After Sales】:Please check the hose and fitting dimensions before ordering.1 year warranty provided,Please purchase and use at any time. Before leaving any feedback, please contact us to solve any problems in your use..
Check Stock

Dorman 624-997 Automatic Transmission Oil Cooler Hose Assembly Compatible with Select Jeep Models

  • Reliable replacement - this automatic transmission oil cooler hose is precision-engineered to replace the stock hose assembly on specific vehicles.
  • Quality construction - manufactured from metal and rubber with OE-style fittings to provide a reliable replacement.
  • Excellent value - OE quality at a lower price.
  • Vehicle tested - has undergone on-vehicle testing to ensure quality, proper fit and performance.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

OEMTOOLS 24688 Transmission Oil Cooler Line Scissors (3/8' x 1/2') | Scissor Design Securely Fits Around Transmission Cooler Lines, for Easy Removal| Small but Powerful Auto Repair Tool

  • DURABLE METAL CONSTRUCTION: Enjoy enhanced durability and reliability over plastic line disconnect tools.
  • This well-made tool holds up under many uses over time.
  • DESIGN: The specialized step design provides just the right shape for quickly and easily disconnecting transmission oil cooler lines.
  • APPLICATIONS: These line scissors disconnect transmission oil cooler lines on Ford and Cadillac vehicles.
  • COMPLETE THE SET: Not all line disconnect sets include a specialty tool like this for Ford and Cadillac transmission oil cooler lines.
Check Stock

(04-05) Duramax Transmission Lines/Hoses (5/8") XTREME-DUTY upgrade-Chevy GMC 6.6L LLY -Allison Transmission Cooler Lines

  • Max Flow 5/8" ID lines for the hardest working trucks! Replaces 2004-2005 Chevy,GMC 6.6L Duramax Transmission Lines. Includes (3) lines and all necessary fittings, zip ties, and easy to follow instructions..
  • 5/8" (larger I.D. for extra flow and cooling) DOUBLE Steel Braided w/abrasion resistant exterior (3X the protection to prevent against rub through or road hazards) - 4000 PSI (16,000 BPSI) Premium Hose - High Quality, crimped on, zinc plated (1) piece steel (not aluminum!) hose ends..
  • Designed and built in USA by CR Performance, a trusted USA manufacturer of the Duramax Transmission lines. We use quality hose and fittings and build for quality, not the cheapest price..
  • Lifetime Warranty & 24/7/365 support with quick response.
Check Stock