ReviewsTransmission For 5 3 Ls Swap

EVIL ENERGY 6AN 3/8 PTFE LS Swap EFI Fuel Line Fitting Kit E85 Nylon Braided Fuel Hose 25FT

  • PTFE nylon braided fuel line kit mostly used in EFI LS system and can be used as fuel injection hose, ls engine swap and EFI conversion fuel line,....
  • Inner Diameter: 5/16". Outside Diameter: 0.465inch. Please measure before purchase!(Includes: as shown in the picture.).
  • Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Maximum working pressure: 3000 psi. Bursting pressure: 10000psi. AN-6 nylon braided....
  • PTFE fuel hose can be compatible with all automotive fuels, lubricants, and coolant..
  • PTFE hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended..
Check Stock

New All Balls Fuel Pump Module 47-1029 Compatible With/Replacement For Can-Am Outlander DPS 450 EFI, Outlander DPS 570 EFI 2016-2020, Outlander L 450 EFI 2015-2016, Outlander L 500 EFI 2015

  • ➰APPLICATION- All fuel, lube, alcohol, ethanol, coolant and gas for automotive and marine. Black braided PTFE fuel line can be used as fuel injection hose, turbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high-temperature and high-pressure applications..
  • ➰WORKING ENVIRONMENT-Maximum Working Pressure=725 psi(5 mpa). Bursting Pressure=2175psi(15 mpa). Working Temperature Range=-40℉ to 392℉(-40℃ to 200℃)..
  • ➰SIZE- length=20 feet. Inner diameter=0.51 inches (12.95 mm). Outer diameter=0.63 inches (16 mm)..
  • ➰MATERIAL- Inner layer: PTFE (Teflon) rubber.
  • middle layer: 304 stainless steel wire mesh sleeve.
  • outer layer: braided nylon. PTFE fuel lines are more resistant to high temperature and pressure..
  • ➰NOTE- PTFE hoses are relatively hard and cannot be bent or folded in half.Double check the hose size before ordering.Professional installation is highly recommended..
Check Stock

NEW TERMINATOR X MAX LS1 24X,1X MPFI KIT WITH TRANSMISSION CONTROL LS 24X CRANK,1X CAM,4L60E,4L80E TRANSMISSION CONTROL,NO LAPTOP REQUIRED,USB/CAN TUNING CABLE,COMPATIBLE WITH LS1,LS6 ENGINES

  • Brand New Terminator X Max LS1 24X/1X MPFI Kit With Transmission Control GM LS 24x Crank, 1x Cam, 4L60E/4L80E Transmission Control, USB/CAN Tuning....
  • Take control of your LS engine with Terminator X Max! Do not settle for a junkyard ECU with a cumbersome tuning interface when you can have complete....
  • Terminator X Max features real-time fuel learn, high impedance injector drivers, an integrated 1bar MAP sensor & 4 programmable inputs/outputs. The....
  • Specs: Brand: Holley EFI | Crank Reluctor: 24x | Ignition Type: GM LS 24x | Injector Connector: USCAR (EV6) | Product Type: Terminator X Max LS MPFI |....
  • NOTE: Terminator X ECU are designed to be mounted with the LEDs facing up.
Check Stock

DNA Motoring GKT-A-2-DP-DNT-GPT-KIT Graphite Aluminum Gasket Plus Donut Studs Bolts Kit,Metallic

  • 1-3/4” and 1-7/8” tubing diameters available for increased exhaust flow increasing performance and improved throttle response.
  • CNC Mandrel-bent tubes provide consistent tubing diameters for smooth flow and increases the cylinder scavenging effect.
  • Made of high quality T-304 stainless steel with computerized mandrel-bends for strength and durability.
  • Note: Headers are not equal length, due to the LS cylinder heads being offset approx 1 /2" from the factory Note: Headers do not utilize the factory....
  • Fitment:Ls Turbo Manifold Fits LS1, LS2, LS3, LS4, LS6, LSX 4.8L, 5.3L, 5.7L, 6.0L, 6.2L V8 engines 1997-2014.
Check Stock

Michigan Motorsports Front Crankshaft Damper Seal Gen 3 Gen 4 LS LS1 4.8 5.3 5.7 6.0 6.2 7.0

  • Michigan Motorsports LS1 Front Crankshaft Damper Seal.
  • Fits all 1997-2013 Gen 3&4 LS Based V8 Engines.
  • LS1 LS2 LS3 LS6 LS7 LS9 L99 LSA LS9 L92 L9H L94 LS2 L76 L77 LY6 L96 LFA LZ1 LY5 LMG LMF LH6 LC9 LY2 L20 L33 LQ4 LQ9 LR4 LM7 L59 LS4 LH8 LH9.
Check Stock

DNJ TK1116B Timing Chain Kit for 2009-2010 / Chrysler, Dodge / 300, Avenger, Charger, Sebring / 2.7L / DOHC / V6 / 24V / 167cid

  • C5R GM Timing Chain Set LS1 LS2 LS3 LS6 LM7 LQ4 4.8 5.3 5.7 6.0 6.2 7.0.
  • This is the same chain used in the C5-R and C6-R racing engines built by Katech..
  • Never broken in all of C5-R racing and durability testing.
  • Fits all Gen 3 and 4 GM LS-based engines.
  • GM 3 bolt cam sprocket (58X), 12586481GM Crank Sprocket 12556582, C5-R Timing Chain, Timing chain dampener 12588670, ARP cam bolts 134-1003.
Check Stock

TIKSCIENCE LS Gen 3 ECM Engine Programming Control Module Reader Diagnostic PCM Bench Harness w/Power Supply Fits for GM Chevy All Blue/Red & Blue/Green 1999-2007 OBD2 Port 18 Gauge 12 Volt

  • Gen 3 LS ECM Programming Bench Harness Application - This bench-top harness that plugs into a standard wall outlet and allows you to connect a Gen 3....
  • LS LS1 Gen III Bench Harness Fitment - This works with HP Tuners, OBDII scan tools, and other programming methods that use the OBDII port for....
  • Gen III Programming Harness Tool Function - The electronic control unit of the automobile electrical system collects part of the working status....
  • Premium Quality LS1 OBDII Bench Harness - This LS LS1 OBDII Bench Harness features a redesigned housing to insure it lasts longer than the factory....
  • What Will You Get: One set OBDII Gen 3 Programming Bench Harness with Power Supply fits for GM Chevy LS LS1 5.3 5.7 6.0. We offer 1 year service with....
Check Stock

Fuel Filter/Regulator 58 PSI Kit with AN-6 Fittings for LS swaps and EFI conversion

  • Simple fuel supply for LS swap with AN-6 adapter fittings included..
  • Your electric fuel pump works continuously & this bypass regulator passes excess fuel back into the tank so the pump can run freely. This filter-regulator is commonly installed near the tank so that only a short return line is required..
  • This is a popular fuel supply solution for fuel injection (EFI / FI) retrofits and for swaps to modern engines like the GM Gen III and Gen IV "LS" V8s..
Check Stock

9L2Z7G391A Automatic Transmission Control Solenoid Pack Assembly Fits for Ford Explorer 2003-2010 Mustang 05-10 Thunderbird 04-05 Mercury Mountaineer 03-10 Lincoln Aviator 03-05 LS 04-06 5R55S 5R55W

  • Transmission solenoids are one of your automatic transmission’s many critical components. A transmission solenoid is an electro-mechanical component “valve” used to control the flow of transmission fluid in the transmission, and they open and close as per the electrical signals they receive from your vehicle’s engine or transmission control unit, which pulls its data from a series of speed sensors in the engine..
  • Modern automatic transmissions use pressurized hydraulic fluid to change gears. Every time a gear change is required, the car’s computer activates a transmission solenoid, which directs transmission fluid into the valve body to engage the correct gear. If one of these electro-mechanical valves fail, then all sorts of transmission problems can ensue..
  • This Automatic Transmission Control Solenoid Fits For the Following Vehicles: 2003-2010 Ford Explorer 6 Cyl 4.0L, 8 Cyl 4.6L, 8 Cyl 4.6L.
  • 2007-2010 Ford Explorer Sport Trac 6 Cyl 4.0L , 8 Cyl 4.6L.
  • 2005-2010 Ford Mustang 6 Cyl 4.0 , 8 Cyl 4.6L, 8 Cyl 5.4L.
  • 2004-2006 Lincoln LS 6 Cyl 3.0L, 8 Cyl 3.9L.
  • 2003-2010 Mercury Mountaineer 6 Cyl 4.0L, 8 Cyl 4.6L, 8 Cyl 4.6L..
  • Customers can find the product you need accurat....
Check Stock

NEW GM T-56 HYDRAULIC THROWOUT BEARING,97-04 CORVETTE,98-02 CAMARO,LS1,LS6,LS7

  • Brand New Ram Hydraulic Throwout Bearing Kit for Stock Style Clutches with GM Tremec T-56 Transmissions (Ram Part #78165)..
  • Fits GM Tremec T-56 transmissions in: * 1997-2004 Chevy Corvette with LS1, LS6, and LS7 engines. * 1998-2002 Chevy Camaro with LS1 engines. * 1998-2002 Pontiac Firebird with LS1 engines..
  • Fits stock style clutches. * Includes a replacement transmission collar to install on your T-56..
  • Includes a remote bleeder line, as well as a supply line. The factory supply line is cut and the adapter fitting (included) is installed with the new supply line..
  • Also, includes a set of conical shims to properly fit the bearing, installation stud, inlet, outlet, and conversion fittings, as well as installation instructions..
Check Stock

SHIFTIN Ivory Beige Leather Cherry Red Walnut Brown Wood Gear Shift Knob Stick Shifter for Lexus ES GS LS RX is SC and Mazda (Tan Leather / Cherry Brown)

  • High-quality aftermarket gear shift knob with premium leather and electroplated chrome..
  • Fits Lexus IS-F IS250 IS300 IS350 LS460 LS600h RX350 RX450h ES300h ES350 GS300 GS350 GS430 GS450h GS460. Compatible Models and Years are presented in the Description..
  • Fits Automatic Transmission shifter with 8mm thread diameter size (M8 x 1.25)..
  • Size: 3.54" x 2.16" x 1.65" (9cm x 5.5cm x 4.2cm) | Thread depth: 1.9" (5cm). Slightly smaller than the OEM knob..
  • Compatible with most of the automatic Lexus, Toyota, Mazda, Scion, and Acura car models with 8mm thread diameter..
Check Stock