ReviewsTransmission For Ls Swap

NEW GM T-56 HYDRAULIC THROWOUT BEARING,97-04 CORVETTE,98-02 CAMARO,LS1,LS6,LS7

  • Brand New Ram Hydraulic Throwout Bearing Kit for Stock Style Clutches with GM Tremec T-56 Transmissions (Ram Part #78165)..
  • Fits GM Tremec T-56 transmissions in: * 1997-2004 Chevy Corvette with LS1, LS6, and LS7 engines. * 1998-2002 Chevy Camaro with LS1 engines. * 1998-2002 Pontiac Firebird with LS1 engines..
  • Fits stock style clutches. * Includes a replacement transmission collar to install on your T-56..
  • Includes a remote bleeder line, as well as a supply line. The factory supply line is cut and the adapter fitting (included) is installed with the new supply line..
  • Also, includes a set of conical shims to properly fit the bearing, installation stud, inlet, outlet, and conversion fittings, as well as installation instructions..
Check Stock

LTI Universal 10ft Nylon Stainless Steel Braided 5/8\ AN10 PTFE E85 Fuel Line Hose Injection (BLACK, 10AN)

  • This PTFE Nylon Braided Fuel Hose are specially designed to work in any automotive project. this hose is ideal for high temperature, high pressure, and offers wide range of fluid compatibility..
  • PTFE Nylon Braided fuel line can be used as fuel injection hose, turbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high temperature high pressure applications..
  • Application: fuel, lube, alcohol, ethanol, coolant and air for automobiles or marine engines, most suitable for racing cars & motor racing bikes. Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Pressure Rating: Maximum Working Pressure (psi): 2000 psi. Bursting Pressure (psi): 6000psi..
  • This hose is made of high-quality PTFE on the inside that gives them high chemical and heat resistance, along with a braided Black Nylon outside which gives them high durability, extreme pressure resistance, and Professional installation is highly recommended..
  • 10AN PTFE E85 Fuel Hose Length: 10ft. Inner Diameter: 0.5" (12.95mm). Outside Diameter: 0.62" (16mm) . Please measure before purchase! Fit for AN PTFE hose end fitting ONLY..
Check Stock

Canitu LS1 ECM ECU PCM LSX CNC Cut Engine Computer Mount Bracket Pcm Swap 6.0 5.3 LQ9 LM7 0411 C10 C-10 (Black)

  • Material: 304 Stainless Steel {Not Raw Steel /Gauge Steel}. Kit comes with 2 x Cut Engine Computer Mount Bracket.
  • Processed by anodic oxidation to deposit a chemically stable oxide layer on the product. Not easy to corrode or be scratched..
  • Our universal GM LS Gen III ECM Mounting bracket for LS1B Red/Blue and Green/Blue 24x two connector ECMs commonly found between 1999 and 2005 and commonly referred to as the 411 ECM. Designed to mount to any flat surface, making mounting an LS ECM a lot easier on your swap project. The ECM bracket utilizes the four small screws in the ECM body. Please confirm your ECM Is the same type as pictured. Hardware not included..
  • Mount comes raw, unpainted – Does NOT come in pink.
Check Stock

OPL HPR076 Aluminum Radiator For Jeep Wrangler TJ/YJ (Chevy V8 Swap)

  • Fits: 1992-2006 Jeep Wrangler TJ w/ Chevy V8 Swap (Automatic Transmission).
  • Fits: 1987-1991 Jeep Wrangler YJ w/ Chevy V8 Swap (Manual Transmission).
  • Core Size: 17.5" x 18.25" x 2" / Overall Size: 26" x 19" x 5.25".
Check Stock

New All Balls Fuel Pump Module 47-1029 Compatible With/Replacement For Can-Am Outlander DPS 450 EFI, Outlander DPS 570 EFI 2016-2020, Outlander L 450 EFI 2015-2016, Outlander L 500 EFI 2015

  • ➰APPLICATION- All fuel, lube, alcohol, ethanol, coolant and gas for automotive and marine. Black braided PTFE fuel line can be used as fuel injection hose, turbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high-temperature and high-pressure applications..
  • ➰WORKING ENVIRONMENT-Maximum Working Pressure=725 psi(5 mpa). Bursting Pressure=2175psi(15 mpa). Working Temperature Range=-40℉ to 392℉(-40℃ to 200℃)..
  • ➰SIZE- length=20 feet. Inner diameter=0.51 inches (12.95 mm). Outer diameter=0.63 inches (16 mm)..
  • ➰MATERIAL- Inner layer: PTFE (Teflon) rubber.
  • middle layer: 304 stainless steel wire mesh sleeve.
  • outer layer: braided nylon. PTFE fuel lines are more resistant to high temperature and pressure..
  • ➰NOTE- PTFE hoses are relatively hard and cannot be bent or folded in half.Double check the hose size before ordering.Professional installation is highly recommended..
Check Stock

LS ECM LSX CNC Cut Engine Computer Mount Bracket Pcm Swap 6.0 5.3 LQ9 LM7 0411

  • Kit comes with 2 x Cut Engine Computer Mount Bracket . Material:1.5mm Cold rolled plate..
  • The 411 ecm is found in most 99-06 ls motors with either a blue and red plug or a blue green plug. The insides are different but bodies are the same..
  • Designed to mount to any flat surface, making mounting an LS ECM a lot easier on your swap project..
  • The ECM bracket utilizes the four small screws in the ECM body. Please confirm your ECM Is the same type as pictured. Hardware not included..
Check Stock

ICT Billet SBC to LS Swap Coolant Temperature Sensor Adapter 1/2 -14 NPT Water LS1 LSX LS3 Small Block Chevy LS1 LS3 LS2 LQ4 LQ9 LS6 L92 L99 L33 LR4 Designed & Manufactured in the USA 551149

  • This adapts SBC/BBC 1/2" NPT coolant temperature sensors to fit LS series engines..
  • Designed to fit all GM LS series engines..
  • Made in Wichita, Kansas from aerospace grade, USA produced billet aluminum.
  • Included in the package is 1 adapter, and 1 sealing washer..
  • Check out the ICT Billet store for more LS Swap Solutions..
Check Stock

HT1250 Programming Cable，USB Programming Cable for Walkie Talkie, Genuine USB Programming Cable for Motorola HT1250 PRO5150 GP328 GP340 MTX450

  • Compatible Radio Models: -PTX Series: BR950, PTX700, PTX760, PTX780. -HT Series: HT750, HT1250, HT1250LS, HT1250 LS+, HT1550, HT1550XLS. -MTP Series: MTP700, MTP750, TETRA MTP810Ex, MTP850Ex.
  • Compatible with: -GP Series: GP140, GP238, GP240, GP280, GP318, GP540, GP580, GP320, GP328, GP329, GP338, GP339, GP340, GP360, GP380, GP640, GP650, GP680, GP960, GP1280.
  • Compatible with: -MTX Series: MTX150, MTX450, MTX850, MTX850 LS, MTX860, MTX950, MTX960, MTX1500, MTX4500, MTX1550, MTX4550, MTX8250, MTX8250 LS, MTX9250 LS.
  • Compatible with: -PRO Series: PR860, PRO5150, PRO5350, PRO5450, PRO5550, PRO5750, PRO7150, PRO7350, PRO7450, PRO7550, PRO7750, PRO9150.
  • This cable can be applied on the following operating systems: for Windows 98ME/Windows 2000/Windows 2003/Windows XP/Windows 7 - 32/64 bit/Windows 8 - 32/64 bit/Vista.(Transmission stability with better performance. ).
Check Stock

EVIL ENERGY 6AN 3/8 PTFE LS Swap EFI Fuel Line Fitting Kit E85 Nylon Braided Fuel Hose 25FT

  • PTFE nylon braided fuel line kit mostly used in EFI LS system and can be used as fuel injection hose, ls engine swap and EFI conversion fuel line,....
  • Inner Diameter: 5/16". Outside Diameter: 0.465inch. Please measure before purchase!(Includes: as shown in the picture.).
  • Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Maximum working pressure: 3000 psi. Bursting pressure: 10000psi. AN-6 nylon braided....
  • PTFE fuel hose can be compatible with all automotive fuels, lubricants, and coolant..
  • PTFE hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended..
Check Stock

APDTY 027046 Variable Valve Timing Intake Solenoid 12627117, 12655434, 12662736

  • Better Than OE - Provides 4% higher seat pressure and 0.030" higher valve lift capacity than GM Blue LS6 springs..
  • High Quality - Manufactured with small batch, premium wire for maximum quality and durability..
  • Cam Swap Ready - Designed for use with popular GM performance camshafts and COMP Cams NSR series camshafts..
Check Stock

LS Swap Motor Mounts Adapter Plates - LS Conversion Adjustable Universal Swap Bracket Small Block,SBC Vehicle to LS Engine LS1 LS3 LS2 LQ4 LQ9 LS6 L92 L99 L33 LR4

  • APPLICATION - These brackets allow a LS series engine to be bolted into a vehicle that originally had a small block chevy engine with your existing....
  • FEATURES - Our Swap motor mounts for LS have a necessary opening milled out of the center of the plate to clear the hump on the backside of your....
  • DESIGN - 4 Adjustable Positions. These are the 4 most desirable positions to accommodate the widest variety of headers, oil pans, steering boxes, and....
  • QUALITY - Our LS Conversion Plates are CNC Milled From Billet Aluminum to Provide the Most Accurate Adapter Plates Available.
  • INCLUDES - (2)Adapter Plates(8)Flat Head Bolts(6)Flange M10-1.5 Bolts(plates are M10 threaded, use the hardware included).
Check Stock