ReviewsTransmission Front Pump Seal

Shorty's Skate Tool The Wench

  • Fitment: Locks flywheel in place when removing harmonic balancer on 6.6L Duramax engines with Allison automatic transmissions..
  • Function: Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement..
  • Duramax 2500 / 3500 Pickups (Toothed pieces only): Removes metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel..
  • Duramax 4500 / 5500 Trucks (Toothed pieces with screws): Remove the rubber inspection cap on the bottom of the transmission. Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place..
  • 36mm 12-point Socket: Use with 3/4" square drive to remove harmonic balancer bolt and retorque on installation. 36mm 12 point socket can also be used on axle..
Check Stock

Thorstone Automotive Fluid Extractor Pump 500cc

  • TRANSFER FLUID SMOOTHLY - Thorstone syringe style fluid evacuator comes with 1/4" and 3/8" extension tubes each at 8.6 inches long, reaching hard-to-reach locations for extracting and changing transmission fluid, power steering fluid, gear oil, anti-freeze and brake fluid..
  • LEAK FREE FLUID EXTRACTOR - The Locking botton helps you to operate safely. This hand pressure fluid extractor and injector features a dual rubber ring design that forms an air tight seal, the precision threading at the end of tube prevents leakage..
  • EFFICIENT LIQUID REMOVAL - The extracting & filling vacuum fluid pump is designed to be chemical and oil resistant. Removes mechanical liluids on ATVs, automobiles, boats, cars, trucks, RVs, lawn mowers, golf carts and other vehicles..
  • WHAT'S INSIDE - Auto oil syringe package includes 1 transparent fluid syringe with locking adapter, 2 clear tubes with end caps for brake fluid syringe pump attachment, and 1 non-drip silicon connector for your convenience..
  • 100% SALE SUPPORT - We back up all products for life, 24*7 fast response customer service free all your concerns. Sincerely thanks for your support to Thorstone!.
Check Stock

Pacer Pumps 58-0714 12 S Series EPDM Water Pump Shaft Seal Kit With Seal and O-Ring

  • The Pacer Pumps water pump shaft seal kit 58-0714 12 includes the primary shaft seal and secondary O-ring..
  • This shaft seal kit is suited for all polyester Pacer S Series and Pacer Pumps with EPDM..
  • The 58-0714 12 Pacer shaft seal kit’s mechanical seal face is made from a durable carbon-ceramic, while the O-ring is made from wear-resistant EPDM..
  • As with all Pacer pump parts, the contents of the 58-0714 12 shaft seal kit are built for superior resistance to chemicals and corrosion for use in a range of commercial and residential applications..
  • The pump shaft seal kit is designed for easy installation onto the water pump for reduced downtime and increased efficiency..
Check Stock

DNJ TBK285WP Timing Belt Kit with Water Pump for 2003-2017/ Acura Honda Saturn/Accord Accord Crosstour Crosstour MDX Odyssey Pilot Ridgeline RL TSX Vue / 3.0L 3.2L 3.5L 3.7L / SOHC

  • THIS KIT INCLUDES: Timing Belt, Timing Seal, Cam Seal, Timing Belt with Hydraulic Tensioner, Timing Belt Tensioner Bearings, Water Pump.
  • FITS: 03-17 Acura, Honda, Saturn 3.0L-3.7L SOHC Naturally Aspirated.
  • FITMENT NOTES: w/o VCM, Premium, w/o VCM, Bearing, Front, Front.
  • You are assured to receive a worldwide proven Timing Belt Water Pump Kit With Hydraulic Tensioner quality part with OE quality fit and performance..
  • We carefully selected DNJ Engine Components as the sole provider of Belt Kits because no one comes close when it comes to their selection. DNJ has a....
Check Stock

XianFeng 22100 Flywheel Locking Tool for 6.6L Duramax Engine with 36mm 3/4 Inch Wench

  • Work on Duramax 2500 / 3500 pickups .Remove metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel..
  • Locking the flywheel at the transmission instead of having to remove the starter for water pump replacement..
  • Toothed pieces with screws---Remove the rubber inspection cap on the bottom of the transmission.Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place..
  • Forged 36mm socket---Use on the balancer bolt.Use with a 3/4" square drive wrench.
  • Quality tool ---Made of CRV steel with durability, flywheel locking tool is anti-rust and corrosion-resistant.
Check Stock

Anti-Rotation Bracket 0

  • The whole body is made of aluminum alloy, light and strong, convenient to use..
  • Widely used in all kinds of shaft transmission of mechanical device, such as the water pump (especially high power), chemical pump, fan, hydraulic machinery..
  • Suitable for petroleum machinery, printing machinery, textile machinery, chemical machinery, mining machinery, metallurgical machinery, aviation (helicopters), ships power transmission system..
  • Suitable for piston mechanical power transmission system, tracked vehicles, as well as generating set high power mechanical drive system, the dynamic balances after applied in transmission shafting were common..
  • Quality assurance, easy and convenient to use, having long service life..
Check Stock

Bolaxin Flywheel Locking Tool with 36mm 3/4 Inch Wench for 6.6L Duramax Engine

  • Locks Flywheel in Place When Removing Harmonic Balancer on 6.6L Duramax Engines with Allison Automatic Transmissions.
  • Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement.
  • Use 36mm 12-point socket with 3/4 square drive to remove harmonic balancer bolt and retorque on installation.
  • Duramax 2500 / 3500 Pickups – Use toothed pieces only removes metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel..
  • Duramax 4500 / 5500 Trucks -- Use toothed pieces with screws remove the rubber inspection cap on the bottom of the transmission. Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place..
Check Stock

EWK Patented 15L Pneumatic/Manual Oil Extractor Pump for Automobile Fluids Vacuum Evacuation

  • TRANSFER FLUID SMOOTHLY - Thorstone syringe style fluid evacuator comes with 1/4" and 3/8" extension tubes each at 8.6 inches long, reaching hard-to-reach locations for extracting and changing transmission fluid, power steering fluid, gear oil, anti-freeze and brake fluid..
  • LEAK FREE FLUID EXTRACTOR - The Locking botton helps you to operate safely. This hand pressure fluid extractor and injector features a dual rubber ring design that forms an air tight seal, the precision threading at the end of tube prevents leakage..
  • EFFICIENT LIQUID REMOVAL - The extracting & filling vacuum fluid pump is designed to be chemical and oil resistant. Removes mechanical liluids on ATVs, automobiles, boats, cars, trucks, RVs, lawn mowers, golf carts and other vehicles..
  • WHAT'S INSIDE - Auto oil syringe package includes 1 transparent fluid syringe with locking adapter, 2 clear tubes with end caps for brake fluid syringe pump attachment, and 1 non-drip silicon connector for your convenience..
  • 100% SALE SUPPORT - We back up all products for life, 24*7 fast response customer service free all your concerns. Sincerely thanks for your support to Thorstone!.
Check Stock

Replacement PS-1000 5/8 AS-1000 Shaft Seal for Pentair Whisperflo & Ultraflow Swimming Pool/Spa Pump PS 1000 AS 1000 Parts

  • Replacement Pump Seal for PS-1000 AS-1000.
  • Shaft Seal for Pentair Whisperflo & Ultraflow Pumps.
  • Southeastern Brand Pool and Spa Replacement Shaft Pump Seal.
Check Stock

FXTUL Transmission Fluid Pump, 8L Pneumatic Transmission Oil Extractor Pump Set with 20 PCS Filling Adapters 2 Way Manual ATF Refill System Dispenser ATF Pump Compatible with BMW, Ford, Audi etc.

  • ✯✯✯【Ultra-safe Design】Includes a pressure monitoring gauge to observe the flow of liquid and a safety valve (preset at 43 PSI) to relieve pressure in case of overload. Extraction working pressure: max. 170psi. / Dispensing working pressure: max. 43psi. Our transmission fluid pump is made of corrosion-resistance material, and it can withstand high pressure and also easy to wash. There will be no air leakage, cracking or liquid spilling, and also guarantee your safety..
  • ✯✯✯【Configured with 20 adapters for superb compatibility】The fluid transfer pump comes with 20 common adapters, that fit a variety of automobiles, including famous cars like BMW, Porsche, VW, Honda, Audi, and many others. Simple push-on coupler design, You can flush and change the oil for your vehicles. All the adapters are installed in a toolbox, with clear model identification..
  • ✯✯✯【8L Capacity】Our pneumatic ATF pump has an 8L large capacity. 2M PU hose with one touch controller gun to connect with transmission filling adapter enables the steady operation of the flow volume and easy to do the dispensing jobs. Without the splashing during the work. It provides an easy way to extract and dispense transmission fluid quickly and cleanly. It's an ideal tool for ....
Check Stock

AAA 90037 Horizontal Triplex Plunger Replacement Pressure Washer Pump Kit, 3700 PSI, 2.5 GPM, 3/4\ Shaft, Includes Hardware and Siphon Tube, for Industrial Gas Powered Machines, Black

  • ⭐【Maintenance-Free】This pump features a maintenance-free crankcase so you never have to change the gasoline. This easy-to-install kit is great for power washers that can support 3100 PSI at 2.5GPM to wash walls, fences, sidewalks, vehicles, and more. ⚠ This pump also fit for the front inlet/outlet engine, but you need to rotate the pump 180 degree and drill holes in the frame to install the pump. If this is difficult for you, please choose a front inlet/outlet pump directly..
  • ⭐【Easy Start】 Built in for simple & quick cold starts to make the startup a breeze, no need to release pressure before starting engine. Each kit includes a siphon tube with filter, mounting bolts, shaft key, and instruction booklet to get your machine back in action as quickly as possible, Set up in 5-10 minutes!.
  • ⭐【COMPATIBILITY 】Replacement for►Homelite: 308653052, 308653006, 308653054, 308653093, 308653078, 308653008, 308653036, 308653035, 308653026, 308653058, UT80432A, UT80432, UT80993. ►Ryobi: RY80930, RY802900, RY802800, RY802723, RY8C2700, RY802700A. ►PowerStroke: PS80944, PS80946, PS80979, PS80945, PS80931, PS80950. ►Husky: HU80709, HU80911, HU80709A, HU80911A. ►Craftsman: 580.752960, 580.752052, 580.752191, 580.7....
Check Stock