ReviewsTransom Mount Rod Holder

Pro Controll EZ Mount Trolling Motor Bow Mount Bracket

MORE MOUNTING OPTIONS: Fish from the bow like the Pros.
An mounting bracket that converts transom mount trolling motors to bow mount.
Fits most Jon or Utility boats with gunnels or toprails less than three inches wide and one inch deep.
PREMIUM DURABILITY: Constructed with stainless steel hardware and indestructible fiberglass reinforced nylon.
FAST SET UP: Simple and seamless tool-free installation.
Line up the lower bracket to the outside of the boat, screw clamps tight, and slide on the trolling motor.
UNIVERSAL FIT: Measures 9.5” L x 6.75” W x 9” H and weighs 6 lbs.
EZ Mount lets you install your transom mount motor anywhere on the boat.
Built with the needs of the Angler in mind.

Check Stock

6PCS Transparent No Drilling Curtain Rod Holder, Upgraded No Drilling Curtain Rod Brackets Self-Adhesive Wall Mount Curtain Rod Holder for 0.6'' to 1.5'' Curtain Rod, Adhesive Curtain Rod Holders

【PRACTICAL DESIGN】Made of premium plastic material and stainless steel used for mount clip, sturdy and durable. 1 pair of curtain rod brackets use powerful adhesive on the back can hold up to 17.6 lbs. Plus, if used with nails onto sturdy wall,1 pair curtain rod holder can reach up to 50 lbs..
【PACKAGE INCLUDED】You will receive 6 pcs universal self adhesive curtain rod holders with screws, our curtain rod brackets are suitable for most of curtain rod, towel rod or shower curtain poles less than 1.57 inch in diameter..
【PREMIUM MATERIAL】Our curtain rod bracket is made of premium plastic material and stainless steel used for mount clip, sturdy and durable, lightweight, strong adhesion, good load-bearing, waterproof and moisture proof..
【WIDE APPLICATIONS】The adhesive curtain rod holder is suitable for smooth glass, tile, marble, stainless steel and other smooth wall,which are applicable for bathroom, window curtain, closet shelf and more. please avoid to using it onto the paited walls and textured walls .No drilling curtain rod brackets is an indispensable item in our daily life..

Check Stock

Boat Utility Table with Cup Holders and Storage - Mounts in Rod Holders - Package Includes Fully Adjustable Rod Holder Mount - Perfect Boat & Marine Grill Accessory - Portable - by Docktail Bar

Mounts in most standard sized rod holders and allows you to level flat at most any angle. If you dont have a rod holder on your boat one can easily be installed by you or a marine service tech..
Portable Boat Caddy, Serving Table, and delux Cup Holder..
Made of King Starboard, UV stabilized, fastened with stainless steel hardware, mount folds flat for easy storage..
Built to last a lifetime in harsh conditions. Table top comes fully assembled, just attach your mount and the table is ready to use in minuets..
Turn key package includes Table top, Magma adjustable rod holder mount, stainless steel hardware..

Check Stock

Car Cup Holder Expander, 2 in 1 Multifunctional Cars Air Vent Cup Holder Organizer Automotive Cup Holders Suitable for Car Drink Bottle, Water Cup, Mobile Phone

UPGRADED 3 in 1 Car Cup holder expander & Air vent phone mount: Combined with car cup holder expander, cup holder phone mount and universal air vent phone mount in 1 pack. Install your phone in different locations according to your usage habits to ensure you get the best viewing angle..
Large Caliber Bottle Organizer: The inner diameter of this bottle holder is 10cm / 3.9inch. It fits different size of bottles and cups from most brands on the market. Such as coffee cups, baby bottles, cups with handle, drink bottles etc. It compatible with 21/24/32/40oz Hydro Flasks, 30/32/38/48oz Nalgenes, 20/26/30oz Yeti Rambler, 12/24oz Yeti Mug,10/20oz Yeti Tumbler, etc..
Expandable Base: Adjustable base has an expandable diameter from 6.85-10 cm/ 2.7 -3.9 inch. This allows the adapter to stay firmly in place. Just hold the base and twist the top, the base will then retract or expand..
Universal adaptability: Cup phone holder for car fits most smartphones from 4inch - 7inch. The broad compatibility across multiple devices allows for nearly all users to enjoy a snug fit and safe ride with their smartphone. the upper support bar for mobile phone holder is adjustable up to 14.7''. With 360° swivel ball and support bar, you can flexibly adjust as needed and enjoy the p....

Check Stock

RAILBLAZA Kayak Fishing Rod Holder R Kit with StarPort HD Mount Base

The RAILBLAZA Rod Holder R is the perfect kayak fishing accessories..
This pole holder can handle a Baitcasting, spinning, or fly fishing rod..
After many, many requests we introduced a StarPort to fit straight into this space, the StarPort HD. This is a stylish, four screw base mount, which....
Rod Holder R is made of marine grade UV stabilized fiberglass reinforced plastic.

Check Stock

Watersnake T24 ASP - 24 Pound Thrust 12v Electric Saltwater Trolling Motor with Transom Mount

Watersnake asp T24 electric trolling motor is the ultimate in lightweight portability weighing only 4.85 lbs (2.2kg). It's the ideal trolling motor to use on kayaks, canoes, small dinghies, and inflatable boats..
Watersnake's simple, universal design keeps the weight down while delivering quality and performance on just about every kayak and canoe. Salt water motor with anti-corrosive paint and stainless steel external & internal parts allow you to take this motor into fresh, brackish and salt water without worry.
The adjustable transom mount fitting makes for easy attachment and has an anti-impact clip system. This easy to steer transom motor uses a hand tiller with an extendable handle, high and low-speed control, forward and reverse switch, and a two-blade mini weedless propeller..
So many features! Adjustable transom mount fitting. Anti-impact clip system. High and low-speed control. Forward and reverse switch. Extendable hand tiller steering..
Measurements: Thrust: 24 lb. Volts: 12V. Amps: 9-20. Shaft: 24" (61cm). Prop: 2 Blade, weedless design..

Check Stock

YaeMarine Fishing Rod Holder 316 Stainless Steel Fishing Rod Rack 3Tube/4Tube/5Tube/6Tube Mirror Finish for Marine Boat Yacht Camper (5 Tube)

【High quality】: Made of marine grade 316 stainless steel,mirror finish,corrosion and rust resistance..
【Easy installation】: Gimbal pin rod stopper,vertically mounted,easy to mount to wall, yacht or boat: Wall side mounted.Racks can be teamed together for multiply rod storage..
【Great construction】: Rolled top and bottom edges - no sharp edges.
Solid construction - no moving parts. Gimble pin rod stop at bottom of rod holder.
【Package Included】: 1- Pack rod holder, 4 Size opption: 3 Tube, 4 Tube, 5 Tube, 6 Tube Fishing Rod Holder,.

Check Stock

Watersnake Venom 34lb Thrust Electric Motor (Fresh & Saltwater)

STURDY SIMPLE DESIGN: Our Watersnake Venom SXW electric motors provide saltwater anglers with a versatile range of tiller-steer transom-mount motors that are loaded with clever features. The shafts on all Venom SXW motors are an extra-tough composite constructed specifically for use in saltwater marine environments. The tiller handles are telescopic for versatility, comfort and control..
CONTROL + FEATURES: The 34lb motors have a two-blade propeller. The 54lb motors each run a three-blade propeller. All propeller shafts are stainless steel and the props have a weedless design, so you can push the boundaries during your next adventure. All the motors run on 12V power and operate with 5 forward and 3 reverse speeds, which are controlled with the tiller handle throttle..
ELECTRIC POWER: 54 lbs thrust, 12 Volt motor, 13-54 Amps / 34 lbs thrust, 12 volt motor, 7.5-34 amps. Battery Not Included. Each motor is suited to boats ranging from small tenders and tinnies up to dedicated estuary and inshore sportfishing boats..
VERSATILE TRANSOM MOUNT: The compact and stylish new Venom motor head design incorporates a new thicker ergonomic grip for the tiller handle. The new head design also includes a digital voltage meter display, so you can keep track of your batte....

Check Stock

Brocraft Inflatable Boats Rod Holder Mount

Glue on Rod holder for ribs. Comes complete with glue on fitting..
Deck mount and rod holder fits permanently and securely to any inflatable using marine glue (GLUE NOT SUPPLIED)).
Adjustable to multiple vertical or horizontal positions.
Fiber-glass Injected Nylon construction,360 dergee adjustable rotation , ALOCK rod secure Rig.
please heated them up with a heat gun(or blow dryer) , to get them pliable and then glue them down.

Check Stock

Partsam 2Pcs LED Stainless Steel Marine Underwater Lights Boat Transom Fishing Squid Lights 6LED Surface Mount

Package includes 2 Pieces LED Surface Mount Underwater Boat Lights 316L Stainless Steel, Screws are included.
Dimension: The diameter of this transom light is 3-2/3 inches and the Thickness is 2/3 inches. Bean angle is 120 degree. Color LED: Blue.
Installation: this boat light come with a 55″ long wire(Black is Ground and red is hot).
Please place this marine light on the transom at the lowest possible location about 3″ above the bottom of the boat and make sure the inside of the transom is clear. Only a 3/5″ hole is required to pass the wire through the transom. Can be installed on small to mid-size boats like sport fishers, center console,cruisers and wakeboard boats. Note: The vessel must be hauled out of the water for installation.
Waterproof: This under water light is IP 68 Waterproof for long-term immersion and protecting from total dust ingress. Of course you can use it above water.
Warranty: We truly offer 1 year warranty! If have any questions or issues about our underwater lights, Please feel free to us and we will reply in 24 hours.

Check Stock

WMYCONGCONG 2 PCS Kayak Deck Plastic Flush Mount Fishing Boat Rod Holder with Cap Cover for Kayak Boat Canoe

Convenient accessory handy fishing rod holder for fishing, designed with sealed bottom prevents leaking through the rod holder..
Material: PC+ABS, high quality ABS, light weight but durable and sturdy, providing a long lifespan..
30 degree angle head for quick rod adjustment.
with 3 fixing point, easily mounts to any flat surface..
Inside Tube Diameter: approx. 40mm/1.57inch..
Package Content: 2 PCS Flush Mount Fishing Boat Rod Holder + 6 pcs M5 * 8 Screws, easy to install and use..

Check Stock