ReviewsTransom Mount Trolling Motor 2

Minn Kota 1358805; Trolling Motor, Terrova 55/ Ip_Bt 54 No Fpdl

  • What's in the Box: Terrova 55lb. 54" motor, i-Pilot Remote, Lanyard, Heading Sensor, MKP-32 Prop, Mounting Hardware. 2-Year Warranty.
  • Lift-Assist Design: A spring-loaded assembly on the Terrova mount makes stowing the trolling motor effortless, every time. Stow/Deploy Lever: Press this lever on the mount and fallaway ramps will effortlessly slide your trolling motor into the water. And when you're ready to move, Lift-Assist helps the motor stow effortlessly. Push-to-Test Battery Meter: Press a button on the trolling motor head to get an instant status of battery life you have left..
  • i-Pilot GPS Trolling System: The most-trusted GPS system in fishing. i-Pilot uses GPS to control your trolling motor with incredible features that keep you on the fish. Set Spot-Locks, record paths, control speed and steering, and more. i-Pilot makes boat positioning and control automatic, and you can take command from its easy-to-read large LCD screen..
  • Spot-Lock with Jog: Spot-Lock will hold you in place with unparalleled GPS accuracy. Available on i-Pilot GPS system that is pre-installed, Spot-Lock gives you the power to stay r....
Check Stock

Minn Kota 1352140 Endura Max Freshwater Hand-Steer Transom-Mount Trolling Motor with Digital Maximizer, 40 lb Thust, 36\ Shaft

  • Endura is trusted worldwide as the most durable, reliable, hard-working transom-mount motor on the water. And Endura Max takes that legacy to a new level, adding Digital Maximizer to help the motor run up to five times longer on a single charge..
  • Lever Lock Bracket: This solid 10-position bracket features a quick-release lever lock and reinforced composite material that resists flexing, warping, and UV damage.
  • Digital Maximizer: Provides up to 5 times longer run time on a single battery charge. These variable speed trolling motors let you dial in your exact speed, and they deliver only as much power as you need, helping to conserve your battery for a full day of fishing.
  • Power Prop: For 3-1/4" motor diameters, this prop delivers extra power to push throw heavy vegetation. Includes prop pin, nut and washer.
Check Stock

Minn Kota 1820175 Trolling Motor Marine Battery Power Center

  • This battery box / power center contains easy access external battery terminals that allow trolling motor leads and charger leads to be connected to the battery posts without opening the box.
  • Protects your battery (not included) on a small boat, transom application (boats that do not have battery compartments).
  • Built-in, push button battery meter with 4 LEDs displays current “state of charge”.
  • 60A resettable circuit breaker connected to top.
  • 10A resettable circuit breaker connected to two accessory ports.
  • Ring terminals on inside battery connectors.
  • Compatible with group 24 and 27 size batteries.
  • Overall dimensions: 7" x 13.5" wide x 12" tall.
  • Motor center ideal for small-boat transom applications.
  • Easy-access batter terminals for connecting leads.
  • Built-in battery meter displays current "state of charge".
  • Designed to fit group 24- and 27-size batteries.
  • Offers pair of 12-volt accessory plugs and manual reset circuit breakers.
Check Stock

Codinter Kayak Motor Mount, Trolling Motor Mount Kit for Sit-On-Top Fishing Kayak Scupper Holes/Kayak Mount Tracks

  • 【Two Install Scenes】 This kayak motor mount works with kayak scupper holes and parallel kayak mount tracks, such as sit-on-top kayaks and fishing kayaks, not for declining flush mount fishing rod holders in the kayak.
  • 【No Drilling Requires】 Installing this kayak trolling motor mount kit does not have to drill into your kayak hull, It’s easy to install just simply plug into the scupper holes or mount it on the track, it’s stable and tightened by the supplied ratchet strap.
  • 【Quality Materials】 The materials used to make this kayak motor mount bracket include anodized aluminum, UV stabilized reinforced plastics, and stainless steel fasteners, this kit is extremely durable and built to last for fresh or saltwater use.
  • 【Heavy Duty】 The mounts are designed to fit into kayak scupper holes / tracks that range from 3.54”-31.5” in width, the diameter of the poles is 1 inch. It can be rated to hold up to 66lb (30kgs) thrust trolling motors.
  • 【Motor Mount】 Suitable for mounting electric and petrol trolling motors either right or left hand side.
Check Stock

MotorGuide R3 Transom Mount Hand-Control, Black, 30-Inch (940100170)

  • Classic twist-tiller operation equipped with the 3-blade Machete propeller.
  • Digital Power Management technology extends battery life up to 5 times for longer running between charges.
  • Tough aluminum 7-position mount gives you greater flexibility and adaptability.
  • Lower unit constructed of solid steel and aluminum with a powder coat finish to withstand the toughest conditions.
  • Reversible motor head for bow or transom mount operation.
Check Stock

Watersnake Venom 34lb Thrust Electric Motor (Fresh & Saltwater)

  • STURDY SIMPLE DESIGN: Our Watersnake Venom SXW electric motors provide saltwater anglers with a versatile range of tiller-steer transom-mount motors that are loaded with clever features. The shafts on all Venom SXW motors are an extra-tough composite constructed specifically for use in saltwater marine environments. The tiller handles are telescopic for versatility, comfort and control..
  • CONTROL + FEATURES: The 34lb motors have a two-blade propeller. The 54lb motors each run a three-blade propeller. All propeller shafts are stainless steel and the props have a weedless design, so you can push the boundaries during your next adventure. All the motors run on 12V power and operate with 5 forward and 3 reverse speeds, which are controlled with the tiller handle throttle..
  • ELECTRIC POWER: 54 lbs thrust, 12 Volt motor, 13-54 Amps / 34 lbs thrust, 12 volt motor, 7.5-34 amps. Battery Not Included. Each motor is suited to boats ranging from small tenders and tinnies up to dedicated estuary and inshore sportfishing boats..
  • VERSATILE TRANSOM MOUNT: The compact and stylish new Venom motor head design incorporates a new thicker ergonomic grip for the tiller handle. The new head design also includes a digital voltage meter display, so you can keep track of your batte....
Check Stock

Pactrade Marine Boat Trolling Motor Foot Control Switch Continuous On Lever 50A

  • This is a Trolling Motor Control Switch that is made for 12V, 24V trolling motors. This product is made of Black PC and it comes with a push switch..
  • This trolling motor is rated to 50 Amps and has a weatherproof control system at IP:65. It also comes with a continuous "ON" lever..
  • For installation, select a desired location for switch. Then, mount the switch to deck with fasteners included..
  • Connect the negative wire of motor to the negative of DC as shown in the diagram. Connect a wire of the switch to 12/24VDC positive. Connect another wire of the switch to the positive of the motor as shown in diagram. Test the operation after set-up..
  • Product Dimension (Switch): 3-1/4" x 2-1/2" x 1-1/4". Item Number: P72520-02..
Check Stock

Solstice Motor Mount for Voyager and Outdoorsman Inflatable Boats

  • VERSATILE CONSTRUCTION: This motor mount assembly is compatible with Solstice Voyager & Outdoorsman inflatable boats (Model #s 30400 30401 30800 31400 31600).
  • MOTOR STRENGTH: The Solstice motor mount can accommodate electric or gas motors rated up to 2.5HP.
  • QUICK INSTALLATION: Simple design makes assembly and installation quick and easy so you can focus on time on the water.
  • HEAVY DUTY CONSTRUCTION: Stainless steel mounting hardware couples with heavy-duty ABS transom plate make for a durable motor mount built to last.
Check Stock

Watersnake Venom Swet 54 Pound Thrust 12V Electric Trolling Motor with 42\ Steel Shaft

  • STURDY SIMPLE DESIGN: Our Watersnake Venom SXW electric motors provide saltwater anglers with a versatile range of tiller-steer transom-mount motors that are loaded with clever features. The shafts on all Venom SXW motors are an extra-tough composite constructed specifically for use in saltwater marine environments. The tiller handles are telescopic for versatility, comfort and control..
  • CONTROL + FEATURES: The 34lb motors have a two-blade propeller. The 54lb motors each run a three-blade propeller. All propeller shafts are stainless steel and the props have a weedless design, so you can push the boundaries during your next adventure. All the motors run on 12V power and operate with 5 forward and 3 reverse speeds, which are controlled with the tiller handle throttle..
  • ELECTRIC POWER: 54 lbs thrust, 12 Volt motor, 13-54 Amps / 34 lbs thrust, 12 volt motor, 7.5-34 amps. Battery Not Included. Each motor is suited to boats ranging from small tenders and tinnies up to dedicated estuary and inshore sportfishing boats..
  • VERSATILE TRANSOM MOUNT: The compact and stylish new Venom motor head design incorporates a new thicker ergonomic grip for the tiller handle. The new head design also includes a digital voltage meter display, so you can keep track of your batte....
Check Stock

Garmin 010-01960-00 GT20-TM Transducer

  • Consistently displays fish arches as well as clear pictures of objects, structure and fish that pass below your boat.
  • 20 ft. transducer cable with built-in fast response temperature sensor has a power rating of 500 W.
  • Depth of 1,900 ft. (traditional) and 750 ft. (ClearVü).
  • Operating frequencies of 77/200 kHz (traditional) and 455 kHz (ClearVü).
  • Transducer comes with transom and trolling motor mounts and installation instructions.
Check Stock

HOOK2 4X - 4-inch Fish Finder with Bullet Skimmer Transducer

  • EASY TO USE: The Lowrance HOOK2 4x Fish Finder features auto-tuning sonar and phone-like menus giving you more time to spend fishing and less time dealing with settings..
  • WIDER SONAR COVERAGE: The HOOK2 4x offers a wide-angle sonar cone giving you double the coverage of traditional fish finders..
  • EASY SETUP: A single transducer can be mounted on the transom, inside the hull, on the trolling motor or through a scupper hole..
  • TRANSDUCER INCLUDED: The included Bullet Skimmer transducer gives you traditional 2-D sonar (fish arch) views..
Check Stock