ReviewsTransparent Petg Filament

SUNLU 2KG PETG 3D Printer Filament Bundle, Super Neat Filament Spool, Strong PETG Filament 1.75mm Dimensional Accuracy +/- 0.02mm, 1KG Spool(2.2LB), Pack of 2, Red+Orange

①【PETG Filament Advantages】PETG filament combines the advantages of both PLA and ABS 3D printer filament, PETG filament is easy to use like PLA, durable strength like ABS..
②【1.75mm Filament Diameter】Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers..
③【SUNLU Spool Diameter】Spool Diameter: 8.00.

Check Stock

Polymaker PETG Filament 1.75mm, 1kg Strong PETG Black Filament Cardboard Spool - PolyLite PETG 1.75mm Black 3D Printer Filament, Print with Most 3D Printers Using 3D Filaments

【Good Mechanical and Thermal Properties】 - More than 12 different colors and effects for your day-to-day creations. PolyLite PETG is designed for your special inventions and strong gadgets. PETG features 80˚C (144˚F) heat resistance and a higher toughness than regular PLA Selected color: Black PETG filament 1.75mm ( PETG Black Filament ).
【Tangle Free & Moisture Free】 - PolyLite PETG is carefully winded to avoid any tangling issues, dried and vacuum sealed in a resealable ziplock bag with desiccant. Please make sure to NEVER let go the tip of the filament as it may create nodes. Holes on the side of the spool can be used to prevent this issue.
️ 【Good Layer Adhesion & Rigidity】 - No warping, no jamming, no blobs or layer delamination issues. PolyLite PETG is a worry-free 3D Printer Filament Black which has great bed adhesion, very consistent color and dimensional accuracy.【Note - turn off the fan for the first layer for improved bed adhesion】.
♻️ 【Cardboard Spool】 - Comes in upgraded 3.0 version packaging with fully recycled cardboard spool and box.
⚙ 【Printing Settings】 - Nozzle: 235˚C.

Check Stock

Inland 1.75mm Blue PETG 3D Printer Filament Dimensional Accuracy +/- 0.03 mm - 1kg Spool 2.2 lbs

1 KG (approximately 2.2 lbs) Spool/ 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
Recommended Extrusion/Nozzle Temperature: 230°C - 250°C (440°F - 480°F)/ No heated bed needed/ Vacuumed sealed with desiccant.
PETG Filament Features: Durable/ good adhesion/ high strength/ high temperature resistant/ low shrinkage/ smoother finish/ odorless, combines the....
Premium Quality: Inland PETG 3D Printer Filament Undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more....

Check Stock

XYZPrinting PETG Filament 1.75mm, NFC Chip, 3D Printer Filament, 600g (1.3lbs), Dimensional Accuracy +/- 0.02 mm, Fit Most 3D Printers, Clear Blue

【Accuracy & Consistency】--- XYZprinting PETG filament has strict tolerance. Diameter 1.75mm, dimensional accurcy +/- 0.02mm. produces quality prints with good tensile strength, surface quality, minimal warping and surface finish. It can be printed at a low temperature and does not require a heated bed..
【Clog-free & Bubble-Free】-- Designed and Manufactured with Clog-Free patent to guarantee a smooth and stable printing experience. Complete drying for 24 hours before vacuum aluminum foil packaging, which can effectively protect the PETG filament from moisture. As the PETG material is sensitive to moisture, please remember to put it back into the re-sealable aluminum foil bag timely after using to maintain excellent printing result.
【Less- tangle and Easy to Use】-- Full mechanical winding and strict manual examination, which guarantee the PETG filaments tidy and easy to be fed.
Larger spool inner diameter design makes feeding smoother.
【NFC Chip】--- XYZprinting NFC chip is attached to the filament spool ring and sends pre-set print settings to the 3D printer. This automatically sets up the optimized profile of your material and lets you know how much filament is left..
【Wide Compatibility】--- Create prints with XYZprinting PETG filame....

Check Stock

NovaMaker PETG 3D Printer Filament 1.75 - Black 1.75mm PETG Filament, PETG 1kg Spool(2.2lbs), Dimensional Accuracy +/- 0.03mm.

✅【Risk-Free Service】One-month free trial, Lifetime Quality Promise and Money Return Service if you’re not entirely satisfied. Professional printing advice from technique support team make sure your prints SMOOTH & STABLE with excellent adhesion..
✅【Best Quality PETG Filament】Made by USA virgin PETG material with best performance and Eco-friendly, Clog-Free, Bubble-Free & Easy-to-use. Ensure Diameter 1.75mm + / - 0.02 mm..
✅【Tangle-Free Tips】Black PETG Filament dried 24 hours before packaging and vacuum sealed with desiccants in nylon bag. To Avoid being Tangled, Filament should be fix into Spool Holes after Every Time Use..
✅【Printing Tips】Recommended Prting Temperature 230°C - 250°C, Bed 70°C - 80°C. PETG Spool Diameter: 7.8" - Spool Width: 2.6" - Spool Hub Hole Diameter: 2.1"..
✅【Cost-effective & Wide Compatibility】Manufacturer NovaMaker has over 8years 3D filament R&D experiences, and produce all kinds of filaments in large scale with premium quality, which contribute to 3d filament cost-effective and reliable for all common 1.75mm FDM 3D printers, such as Creality, MK3, Ender3, Prusa, Monoprice, FlashForge etc..

Check Stock

NovaMaker PETG 3D Printer Filament 1.75, Clear PETG Filament 1.75mm, Transparent PETG 1kg(2.2lbs), Dimensional Accuracy +/- 0.03mm

✅【Risk-Free Service】One-month free trial, Lifetime Quality Promise and Money Return Service if you’re not entirely satisfied. Professional printing advice from technique support team make sure your prints SMOOTH & STABLE with excellent adhesion..
✅【Best Quality PETG Filament】Made by USA virgin PETG material with best performance and Eco-friendly, Clog-Free, Bubble-Free & Easy-to-use. Ensure Diameter 1.75mm + / - 0.02 mm..
✅【Tangle-Free Tips】Clear PETG Filament dried 24 hours before packaging and vacuum sealed with desiccants in nylon bag. To Avoid being Tangled, Filament should be fix into Spool Holes after Every Time Use..
✅【Printing Tips】Recommended Prting Temperature 230°C - 250°C, Bed 70°C - 80°C. PETG Spool Diameter: 7.8" - Spool Width: 2.6" - Spool Hub Hole Diameter: 2.1"..
✅【Cost-effective & Wide Compatibility】Manufacturer NovaMaker has over 8years 3D filament R&D experiences, and produce all kinds of filaments in large scale with premium quality, which contribute to 3d filament cost-effective and reliable for all common 1.75mm FDM 3D printers, such as Creality, MK3, Ender3, Prusa, Monoprice, FlashForge etc..

Check Stock

Inland 1.75mm White PETG 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm - 1kg Spool (2.2 lbs)

1 KG (approximately 2.2 lbs) Spool/ 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
Recommended Extrusion/Nozzle Temperature: 230°C - 250°C (440°F - 480°F)/ No heated bed needed/ Vacuumed sealed with desiccant.
PETG Filament Features: Durable/ good adhesion/ high strength/ high temperature resistant/ low shrinkage/ smoother finish/ odorless, combines the advantages of both PLA and ABS.
Premium Quality: Inland PETG 3D Printer Filament Undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time creating! 100% satisfaction guarantee provided.

Check Stock

Inland 1.75mm Black PETG 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm - 1kg Spool (2.2 lbs)

1 KG (approximately 2.2 lbs) Spool/ 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
Recommended Extrusion/Nozzle Temperature: 230°C - 250°C (440°F - 480°F)/ No heated bed needed/ Vacuumed sealed with desiccant.
PETG Filament Features: Durable/ good adhesion/ high strength/ high temperature resistant/ low shrinkage/ smoother finish/ odorless, combines the advantages of both PLA and ABS.
Premium Quality: Inland PETG 3D Printer Filament Undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time creating! 100% satisfaction guarantee provided.

Check Stock

NOVAMAKER PETG Black Filament 1.75mm ,Toughness Enhanced petg Vacuum Sealed,Accuracy +/- 0.02mm, 1kg(2.2lbs) Spool, 3D Filament petg

✅【Toughness Enhanced】Ease of printing, high purity with low shrinkage and superb layer bonding.Novamaker PETG filaments will meet your demands for printing projects of functional parts with higher toughness..
✅【Clog-Free & Bubble-Free】Novamaker dry petg 1.75mm filament for 48 hours before packaging and vacuum sealed in nylon rebag. No stringing and warping issues,easy to use..
✅【Tangle Less】Advanced take-up device, PLC automatic precise wire arranging to make sure the line tidy and less-tangle and guarantee the petg filament 1.75 tidy and easy to be fed..
✅【Dimensional Consistency】1.75 mm petg, dimensional accuracy + / - 0.02 mm,giving you a great printing experience with no clog. 1 kg spool..
✅【All Lifetime Warranty】Recommended extrusion/nozzle temperature 230°C - 250°C,net weight 1kg spool. Fast and effective 24 x 7 professional customer support providing technical solution of novamaker petg black filament..

Check Stock

Inland 1.75mm Translucent Blue PETG 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm - 1kg Spool (2.2 lbs)

1 KG (approximately 2.2 lbs) Spool/ 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
Recommended Extrusion/Nozzle Temperature: 230°C - 250°C (440°F - 480°F)/ No heated bed needed/ Vacuumed sealed with desiccant.
PETG Filament Features: Durable/ good adhesion/ high strength/ high temperature resistant/ low shrinkage/ smoother finish/ odorless, combines the advantages of both PLA and ABS.
Premium Quality: Inland PETG 3D Printer Filament Undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time creating! 100% satisfaction guarantee provided.

Check Stock

SUNLU PETG-G 3D Printer Filament 1.75mm 1 kg Spool, Better Flow of SUNLU no plugging Premium PETG-G Filament 1.75 +/- 0.02 mm for 3D Printing，Black

【Tangle Free& No Plugging】 Better flow of SUNLU no plugging premium 1.75mm PETG-G filament. It has consistent diameter & roundness, less stringing and warping, strong layer adhesion. Article-free and impurity-free. 100% New Virgin Material FROM Korea..
【High Precision +/- 0.02mm Tolerance】: 1.75mm PETG-G 3D filament(Tolerance Level : ± 0.02mm). Full 1KG 3d printer filament reel, perfect roundness and very tight diameter tolerance , approximately 325 m of filament on each spool ease of use, minimal warping, no clogging, no bubbles. Increase your 3d printing objects delicacy..
【Rigid, Tough, High Performance 3D Printing Material】3d printer filament PETG-G 1.75 is a rigid, tough, high performance material, offering excellent clarity, light transmission and high gloss. It's about as stiff as PLA. and is highly resistant to temperatures at above 60°C(140°F)..
【Recommended Printing Temp/Nozzle Temperature】: PETG-G 3d printer filament suggest printing temperature is 215-230°C(419-446°F).Bed/Platform temperature of 60-80°C(140-176°F)..
【High Compatiblity &100% Enviromental Material】: Works and harmonizes....

Check Stock