ReviewsTraxxas E Revo Brushed Speed

Hot Racing RVO11X06 Aluminum Differential Carrier Case - E-Maxx E-Revo Xo-1

Hot Racing is a United States based company.
parts are sourced from Chinese producers.
All Hot Racing upgrade parts are direct replacements for stock components.
This item works with: Traxxas E-Maxx 3908 Brushless, E-Revo 5603 5605 5608, XO-1.

Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles.
This product is made from high quality materials and designed for lasting performance.
This is for use on RC vehicles such as the Traxxas Revo.
consult your user's manual for exact parts listings.

compatible with 32-pitch, motor gear diameter: 45mm/1.77inch.
inner diameter: 11.9mm/0,47inch, replace for 3956.
【15T/17T/19T pinions】Inner diameter: 5.0mm/0.196inch, come with a 3.175mm coupler to convert 3 pinions apertures to 3.175mm/0.125inch. Suitble for....
【Application】The gear kits compatible with Traxxas Slash 4x4 4WD/2WD/VXL Rally/Stampede 4x4 VXL /Traxxas 1/10 Summit/Trxxas 1/10 E-REVO/T-Maxx.
【Material】Made of high-strength hardened steel, increased wear resistance and last longer life, M4 set screw has been added to each pinion gear....
【Free Style】The speed depends on your gear ration. We provide 3 different teeth pinion gear(15T/17T/19T) to make you more choice in gear ration.

Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles.
This product is made from high quality materials and designed for lasting performance.
This is for use on RC vehicles such as the Traxxas Revo.
consult your user's manual for exact parts listings.

Steel constant velocity driveshafts for 1/10 Revo and T/E Maxx trucks.
Designed to handle the extreme horsepower and articulation that your Traxxas truck can dish out.
Inner and outer U-joints are lubricated and sealed by a rubber boot for maximum protection against the elements.
Nickel plated steel shafts, blue silicone boots, and red-anodized aluminum accents provide head-turning looks.

50 tooth hardened steel Mod 1 (1.0 metric pitch) spur gear for the Traxxas E Revo2, X-Maxx 6S and 8S, Maxx 4S and XO-1.
Do NOT use the pin system for setting the X-Maxx gear mesh. Instead, manually set the gear mesh without the pins. Refer to the Traxxas manual for instructions (ref. pg.22 - Adjusting Gear Mesh).
With the pins removed, use the four 4x16mm button-head cap screws on the bottom to set gear mesh. Loosen the four 4x16mm button-head cap screws. Cut a narrow strip of notebook paper and run it into the gear mesh. Slide the motor and pinion gear into the spur gear. Tighten the four 4x16mm button-head cap screws, and then remove the strip of paper. You should be able to run a fresh strip of paper through the gears without binding them..

50 tooth hardened steel Mod 1 (1.0 metric pitch) spur gear for the Traxxas E Revo2, X-Maxx 6S and 8S, Maxx 4S and XO-1.
Do NOT use the pin system for setting the X-Maxx gear mesh. Instead, manually set the gear mesh without the pins. Refer to the Traxxas manual for instructions (ref. pg.22 - Adjusting Gear Mesh).
With the pins removed, use the four 4x16mm button-head cap screws on the bottom to set gear mesh. Loosen the four 4x16mm button-head cap screws. Cut a narrow strip of notebook paper and run it into the gear mesh. Slide the motor and pinion gear into the spur gear. Tighten the four 4x16mm button-head cap screws, and then remove the strip of paper. You should be able to run a fresh strip of paper through the gears without binding them..

RC Cars maintenance station can be rotated 360°, which has an adjustable height of 136mm-203mm, which is convenient for all your operations..
Compatible with 1/8 1/10 1/12 1/16 1/18 RC Cars Truck,Buggy,Crawler,Drift, E.g Traxxas Slash 4x4 / 2WD / Trx-4 / E-Revo / Revo 3.3 / Redcat Volcano....
RC car repair station is equipped with scale data to measure the length of the screw attachment..
Equipped with a magnetic strip and Screw Tray, won't worry the metal parts rolling everywhere..
Pack of 1 Stand ( NOT INCLUDE THE RC CAR),Produced By VQRTKS ,Well made and durable..

Front and rear wheel adapter for Traxxas 1/16 Slash 4WD, E-Revo (VXL), Summit (VXL).
Outer diameter 0.47'' (12mm), Hole inner diameter 0.157'' (4mm), Thickness 0.157'' (4mm).

Made using only the highest quality components.
Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles.
This product is made from high quality materials and designed for lasting performance.
This is for use on RC vehicles such as the Traxxas Revo.
consult your user's manual for exact parts listings.

1.Superior Quality&SAFETY Guaranteed with Long-lasting Functions: SYPOM 80C RC Graphene Lipos 5500mAh 3S 11.1V Lipo Battery pack with Ultra High....
2.Dimensions: SYPOM 3S 80C 5500mAh 11.1V RC lipo battery dimension is(±2mm):135*44*29mm(L*W*H).
3.Application:SYPOM 5500mAh 3S Lipo battery pack specially designed for Traxxas E-Revo 2.0/ V2 E-Revo/Axial Bomber/Losi tt tentaciy pro/Redcat gen8....
4.High Performance:SYPOM 3S lipos with 80C discharge rate softcase offers you very high power and very long run time for your RC cars. They are widely....
5.WHAT YOU WILL GET:2packs of SYPOM 11.1V 80C 5500mAh 3S Lipo Battery pack soft case with Deans(T) and EC5 Connector. After-sales Service: Every SYPOM....