ReviewsTraxxas E Revo Lights

Traxxas 5376 Fuel Tank Rebuild Kit

  • Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles.
  • This product is made from high quality materials and designed for lasting performance.
  • This is for use on RC vehicles such as the Traxxas Revo.
  • consult your user's manual for exact parts listings.
Check Stock

Traxxas Motor 2200Kv 75mm brushless (with 6.5mm Gold-Plated connectors & high-Efficiency heatsink)

  • Traxxas 3481 - 2200Kv 75mm Brushless Motor, E-Revo VXL Brushless, UDR.
  • Features: High-Speed Ball Bearings 5mm Motor Shaft TRX 6.5mm Bullet Connectors.
  • Part number(s) included (in factory packaging): 3481.
Check Stock

Traxxas 5451R Revo/Maxx Steel CV Driveshafts (Assembled with Boots)

  • Steel constant velocity driveshafts for 1/10 Revo and T/E Maxx trucks.
  • Designed to handle the extreme horsepower and articulation that your Traxxas truck can dish out.
  • Inner and outer U-joints are lubricated and sealed by a rubber boot for maximum protection against the elements.
  • Nickel plated steel shafts, blue silicone boots, and red-anodized aluminum accents provide head-turning looks.
Check Stock

DAPENGNIAO for Das87 6 Pcs M0.2 Brass 10T-50T Spur Gear Accessories

  • 50 tooth hardened steel Mod 1 (1.0 metric pitch) spur gear for the Traxxas E Revo2, X-Maxx 6S and 8S, Maxx 4S and XO-1.
  • Do NOT use the pin system for setting the X-Maxx gear mesh. Instead, manually set the gear mesh without the pins. Refer to the Traxxas manual for instructions (ref. pg.22 - Adjusting Gear Mesh).
  • With the pins removed, use the four 4x16mm button-head cap screws on the bottom to set gear mesh. Loosen the four 4x16mm button-head cap screws. Cut a narrow strip of notebook paper and run it into the gear mesh. Slide the motor and pinion gear into the spur gear. Tighten the four 4x16mm button-head cap screws, and then remove the strip of paper. You should be able to run a fresh strip of paper through the gears without binding them..
Check Stock

Boston Gear L5092 Rack Gear, 14.5 Degree Pressure Angle, 20 Pitch, 2.0 feet long, Steel

  • 50 tooth hardened steel Mod 1 (1.0 metric pitch) spur gear for the Traxxas E Revo2, X-Maxx 6S and 8S, Maxx 4S and XO-1.
  • Do NOT use the pin system for setting the X-Maxx gear mesh. Instead, manually set the gear mesh without the pins. Refer to the Traxxas manual for instructions (ref. pg.22 - Adjusting Gear Mesh).
  • With the pins removed, use the four 4x16mm button-head cap screws on the bottom to set gear mesh. Loosen the four 4x16mm button-head cap screws. Cut a narrow strip of notebook paper and run it into the gear mesh. Slide the motor and pinion gear into the spur gear. Tighten the four 4x16mm button-head cap screws, and then remove the strip of paper. You should be able to run a fresh strip of paper through the gears without binding them..
Check Stock

VQRTKS Aluminum Alloy RC Car Work Stand Repair Workstation 360 Degree Rotation Lift Or Lower w/Screw Tray for 1/8 1/10 1/12 1/16 1/18 Scale Cars Trucks Buggies Rc Car Stand Blue

  • RC Cars maintenance station can be rotated 360°, which has an adjustable height of 136mm-203mm, which is convenient for all your operations..
  • Compatible with 1/8 1/10 1/12 1/16 1/18 RC Cars Truck,Buggy,Crawler,Drift, E.g Traxxas Slash 4x4 / 2WD / Trx-4 / E-Revo / Revo 3.3 / Redcat Volcano....
  • RC car repair station is equipped with scale data to measure the length of the screw attachment..
  • Equipped with a magnetic strip and Screw Tray, won't worry the metal parts rolling everywhere..
  • Pack of 1 Stand ( NOT INCLUDE THE RC CAR),Produced By VQRTKS ,Well made and durable..
Check Stock

RC Aluminum Wheel Hubs Hex Driver Adapter for Traxxas 4x4 Slash E-Revo Summit 1/16 Truck Car, Upgrade 7154

  • Front and rear wheel adapter for Traxxas 1/16 Slash 4WD, E-Revo (VXL), Summit (VXL).
  • Outer diameter 0.47'' (12mm), Hole inner diameter 0.157'' (4mm), Thickness 0.157'' (4mm).
Check Stock

Traxxas 5460R Aluminum Body GTR Shocks in Red, Revo, 4-Piece, 411-Pack

  • Made using only the highest quality components.
  • Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles.
  • This product is made from high quality materials and designed for lasting performance.
  • This is for use on RC vehicles such as the Traxxas Revo.
  • consult your user's manual for exact parts listings.
Check Stock

SYPOM 3S Lipo Battery Pack 11.1V 5500mAh 80C RC Battery with Deans T &EC5 Connector SoftCase RC Battery for Traxxas E-Revo 2.0/Axial Bomber/Losi tt tentaciy pro/Redcat gen8 Axe RC Models 2Packs

  • 1.Superior Quality&SAFETY Guaranteed with Long-lasting Functions: SYPOM 80C RC Graphene Lipos 5500mAh 3S 11.1V Lipo Battery pack with Ultra High....
  • 2.Dimensions: SYPOM 3S 80C 5500mAh 11.1V RC lipo battery dimension is(±2mm):135*44*29mm(L*W*H).
  • 3.Application:SYPOM 5500mAh 3S Lipo battery pack specially designed for Traxxas E-Revo 2.0/ V2 E-Revo/Axial Bomber/Losi tt tentaciy pro/Redcat gen8....
  • 4.High Performance:SYPOM 3S lipos with 80C discharge rate softcase offers you very high power and very long run time for your RC cars. They are widely....
  • 5.WHAT YOU WILL GET:2packs of SYPOM 11.1V 80C 5500mAh 3S Lipo Battery pack soft case with Deans(T) and EC5 Connector. After-sales Service: Every SYPOM....
Check Stock

Rc Metal Steel 54T 32P Spur Gear with 15T/17T/19T Pinions Gear Sets Replace 3956 for Traxxas Slash 4x4 4WD/2WD/VXL Rally/Stampede 4x4 VXL/Summit/E-REVO/T-Maxx/Rustler 4X4 VXL

  • Compatible with Traxxas Slash 4x4 4WD/2WD/VXL Rally/Stampede 4x4 VXL /Traxxas 1/10 Summit/Trxxas 1/10 E-REVO/T-Maxx/Jato/Rustler 4X4 VXL/Summit..
  • The inner diameter of the 15T/17T/19T pinion gear set is:5.0mm/0.196inch, come with a 3.175mm coupler to convert 3 pinions apertures to....
  • compatible with 32-pitch, motor gear diameter: 45mm/1.77inch.
  • inner diameter: 11.9mm/0,47inch, replace for 3956..
  • Suitable for traxxas slash gears is made of heavy duty hardened steel, long time life span..
  • The speed depends on your gear ration. We provide three different teeth slash 4x4 gear set to make you more choice in gear ration..
Check Stock

CASTLE CREATIONS Motor, 4-Pole SENSORED BRUSHLESS 1717-1650kV, Green

  • High-strength, high-temperature grade neodymium sintered magnets combined with a high-strength Kevlar wrap ensures the integrity of the rotor is not compromised during harsh running conditions..
  • Our proprietary winding techniques allow us to produce a stator assembly that is the lowest possible resistance, resulting in a cooler running motor resulting in a longer lifetime..
  • Oversized NMB bearings and vibration dampening system ensure the longest bearing life possible..
  • High quality, high-current 6.5mm male Castle Bullet Connectors attached to ultra-high strand count replaceable 10-gauge wire.
  • Ideal for 1/6 scale vehicles up to 20lbs running 6s – 8s LiPo.
  • it is also a great upgrade for drivers looking for a reliable, high torque 8s motor for their 1/8th scale vehicles. Examples include Losi LST2-E.
  • Redcat Shredder. Note: "Recommendations based on vehicle weight and motor capabilities. Verify motor fitment, may require optional motor mount.".
Check Stock