ReviewsTraxxas Green Anodized Aluminum

CODA RACING RC Alloy Caster Block&Steering Blocks&Rear Stub Axle Carriers for Traxxas 1/10 2WD Slash, Stampede, Rustler, Nitro Slash-Replaces Part 3736 3632 3752

  • Easy upgrade replace Traxxas stock part #3632 Caster blocks，#3736 Steering blocks,#3752 Stub axle carriers.
  • Fits: Traxxas 1/10 Slash 2WD ,1/10 Stampede 2WD,1/10 Rustler 2WD,1/10 Ford F-150 Raptor,1/10 Nitro Slash 2WD,Bigfoot 2WD.
  • Precision CNC machined,Anodized 6061-T6 aluminum for lightweight and durable performance..
  • Includes Caster blocks&Steering blocks(L/R),Stub axle carriers(L/R),5x11x4mm bearings(8),PTFE washers(8),Suspension Screw Pins(6),Screws(2),Washers(4).
Check Stock

Traxxas 57076-4 - Spartan Brushless Race Boat w/Velineon VXL-6s, RTR, Orange

  • Traxxas 57076-4 - Spartan Brushless Race Boat w/Velineon VXL-6s, RTR, Orange.
  • Features: 35+mph with two 7.4V LiPo packs, 50+mph on 6s LiPo all-out! (batteries sold separately) Sleek 36" deep-V hull for stable high-speed performance. Water-cooled, waterproof VXL-6s marine speed control. Velineon 540XL high-output brushless motor with high flow water-cooling jacket. TQi 2.4GHz radio system with Traxxas Stability Management. Quick-release Power Module integrates power system, waterproof electronics, and stuffing tube. Blue-anodized aluminum rud.
  • Includes: (1) Spartan Brushless 36' Racing Boat (1) 2.4GHz TQi Radio (1) Brushless Motor (1) Castle Engineered ESC (1) Instruction Manual.
  • Specs: Hull Length: 36.5" (927mm) Overall Length: 40.8" (1037mm) Beam (Width): 9.5" (243mm) Weight: 72oz (2041g) Dead Rise Angle: 26° Input Voltage: 7-18 NiMH Cells, 2-6 LiPo Cells (8.4V-22.2V DC).
  • Part number(s) included (in factory packaging): 57076-4.
Check Stock

CODA RACING RC Alloy Caster Block&Steering Blocks&Rear Stub Axle Carriers for Traxxas 1/10 4X4 Slash Stampede Rustler 4WD -Replaces Part 6837 6832 1952

  • Easy upgrade replace Traxxas stock part #6832 Caster blocks(c-hubs)，#6837 Steering blocks,#1952 Stub axle carriers.
  • Fits: Traxxas 1/10 Slash 4X4 ,1/10 Stampede 4X4,1/10 Rustler 4X4,1/10 Slash 4X4 VXL Ultimate Platinum,1/10 Stampede 4X4 VXL,1/10 Rustler 4X4 VXL.ST....
  • Precision CNC machined,Anodized 6061-T6 aluminum for lightweight and durable performance..
  • Includes Caster blocks&Steering blocks(L/R),Stub axle carriers(L/R),5x11x4mm bearings(2),10x15x4mm bearings(6),Bushing Sleeves(4),Screws(6),PTFE....
Check Stock

Traxxas 5460A Blue-Anodized Aluminum GTR Shocks (fully assembled w/o springs) (set of Four)

  • Blue-anodized aluminum GTR Shocks are the ultimate in damping performance and consistent lap-after-lap control.
  • Machined, threaded, aluminum body with an oversized spring collar for easy and precise preload adjustments.
  • Vented spring perches help prevent dirt from packing around the X-ring seals.
  • Hard-chrome shafts resist stiction for smooth action and consistent performance.
  • Fully assembled in sets of four, complete with silicone fluid. Fits 1/10 scale Traxxas Revo, Slayer, and Summit models.
Check Stock

for Traxxas Slash Rustler Bandit Vxl 4X4 4WD 2WD Orange Parts Shocks Absorber Front Rear 1 10 Damper Short Course Racing Truck Upgrade 4-Pack

  • ✔ Compatible With traxxas slash 4x4/ traxxas rustler 4x4 vxl/traxxas slash 2wd/traxxas rustler/traxxas bandit/traxxas stampede/Rally 4X4/Hoss 4x4 VXL.
  • ✔ Fitted Really Well.Oil Filled Style,Adjustable Tension,Very Smooth And Durable.Good for Big Jumps..
  • ✔ Alloy Aluminum Front Shock Absorber : Approx.100mm.
  • Alloy Aluminum Rear Shock Absorber : Approx.110mm.
  • ✔ 4 Shocks Per Package. All Hardware For Assembly Included..
  • ✔ Premium Quality Aluminum Shocks Upgrade Parts Ship Fast .Responsive Customer Service..
Check Stock

Hobbypark Aluminum Steering Blocks Caster Blocks C-Hubs Stub Axle Carriers and Alloy Suspension Arms Set Front & Rear for 1/10 Traxxas Slash 4x4 Replacement of 6837 6832 1952 3655x Navy Blue

  • ✔Compatible with: Traxxas 1/10 Slash 4x4 4WD, Stampede 4x4, Stampede 4X4 VXL RC Car, Replace Traxxas Stock Part# 6837 6832 1952 3655x.
  • ✔The Susp A-Arms come with Come with Screw pins for easy installation, High Quality Upgrade Parts.
  • ✔Anodized 6061-T6 aluminum, CNC machined for Lightweight and Durable performance..
  • ✔Package include: 1 Set (Front & Rear Susp A-Arms and Steering Knuckles Set, As shown in the picture).
  • ✔100% New,Genuine HobbyPark RC Products,Exquisite workmanship & Durable.Buy with Confidence,Friendly Customer Service.
Check Stock

CrazyHobby 4PCS Aluminum Front & Rear Suspension A-Arms Set and Tie Bar for 1/10 Traxxas Slash 2WD Upgrades Parts, Replacement of 2555 3631 2532 (Blue)

  • The Upgrade Parts Compatible with Traxxas 1/10 Slash 2WD Short Course Truck. NOT fit Stampede 2WD / Rustler VXL..
  • Come with Screw Pins, Easy upgrade from the original parts, easy to install..
  • Made of Aluminum Alloy, Anodized, CNC machined, High precision, Lightweight & Durable..
  • You will get: Aluminum Front Lower Suspension Arms Set(Left&Right).
  • Aluminum Rear Lower Suspension Arms Set(Left&Right).
  • Metal Aluminum Tie Bar. Replaces Stock Part# 2555 3631 2532..
  • 100% New, Genuine CrazyHobby Products,Exquisite workmanship & Durable,Buy with Confidence,Friendly Customer Service.
Check Stock

Traxxas 5451R Revo/Maxx Steel CV Driveshafts (Assembled with Boots)

  • Steel constant velocity driveshafts for 1/10 Revo and T/E Maxx trucks.
  • Designed to handle the extreme horsepower and articulation that your Traxxas truck can dish out.
  • Inner and outer U-joints are lubricated and sealed by a rubber boot for maximum protection against the elements.
  • Nickel plated steel shafts, blue silicone boots, and red-anodized aluminum accents provide head-turning looks.
Check Stock

CODA RACING Alloy Front&Rear Shock Tower & Brace for Traxxas 1/18 LaTrax Teton Desert Prerunner Rally SST -Replaces Part 7637

  • Easy upgrade replace Traxxas stock part #7637 Shock Tower & Brace.
  • Precision CNC machined,Anodized 6061-T6 aluminum for lightweight and durable performance..
  • Includes Front&Rear Suspension Shock Tower(2)，Brace(2)，Screws(14).
Check Stock

Traxxas TRA7462 Shocks, GTR xx-Long Blue-Anodized, PTFE-Coated Bodies with TiN shafts (2)

  • Traxxas 7462 - GTR XX-Long Shocks, Blue, Slash/Rustler 4x4 (2).
  • Features: Hard Anodized PTFE Aluminum Bodies TiN Coated Shafts Blue in Color.
  • Includes: (2) Shocks (1) Bottle of Silicone Shock Oil.
  • Part number(s) included (in factory packaging): 7462.
Check Stock

Hobbypark Metal Aluminum Chassis for 1/18 Traxxas LaTrax Teton Rally, Replacement Parts of 7522 (Navy Blue)

  • ✔These replacement accessories compatible with Traxxas 1/18 LaTrax Teton, Latrax Rally RC Cars Trucks Models.
  • ✔Upgrades of stock part #7522,CNC machined for precision,easy upgrade from original ones.
  • ✔These option parts made of 6061-T6 aluminum, Anodized, for lightweight and durable performance..
  • ✔Package include: 1x Metal Chassis (As shown).
  • ✔100% New,Genuine HobbyPark RC Products,Exquisite workmanship & Durable.Buy with Confidence,Friendly Customer Service.
Check Stock