ReviewsTraxxas Slash Monster Energy

Traxxas 6884 Center Differential Housing with Seals and Hardware

  • Use Traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles..
  • This product is made from high quality materials and designed for long-lasting performance..
  • This is replacement hardware for use on Traxxas vehicles.
  • consult your user's manual for exact parts listings..
  • Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles.
  • This product is made from high quality materials and designed for lasting performance.
  • This is for use on RC vehicles such as the Traxxas Slash 4x4.
  • consult your user's manual for exact parts listings.
Check Stock

Traxxas Slash 4X4: 1/10 Scale 4WD Electric Short Course Truck with TQi Link Enabled 2.4GHz Radio System & Traxxas Stability Management (TSM)

  • Traxxas 68086-4 - Slash VXL 1/10 4x4 Short Course Truck RTR w/TSM, Orange.
  • Features: Traxxas Stability Management TM (TSM). Powered by the Velineon Brushless Power System. Slash 4X4 reaches speeds in excess of 60+mph!*. Maxx Cable 12-gauge wire. Traxxas High-Current Connector (patented) allows high-capacity battery packs to deliver maximum voltage to the Velineon Brushless Power System. Exclusive waterproof electronics extend brushless power and performance to water, mud, and snow. Velineon VXL-3s Electronic Speed Control. LiPo and NiM.
  • Includes: (1) Slash 4X4 Short Course Race Truck w/TQi 2.4GHz Radio System (1) Brushless ESC and Motor (1) Body, Decals Illustrated Instruction Manual.
  • Specs: Length: 22.36" (568mm) Width: 11.65" (296mm) Height: 8.42" (214mm) Front and Rear Track: 11.65" (296mm) Distance Between Outer Edges of Wheels Side-to-Side Center Ground Clearance: 2.83" (72mm) Body Dimensions: Length: 21.25" (540mm) Width: 11.5" (292mm), Height: 5.5" (140mm) Spur Gear: 54 tooth, 0.8 Module 32 Pitch Pinion Gear: 13 Tooth.
  • Part number(s) included (in factory packaging): 68086-4.
Check Stock

Traxxas Slash 4X4: 1/10 Scale 4WD Electric Short Course Truck with TQi Link Enabled 2.4GHz Radio System & Traxxas Stability Management (TSM)

  • Traxxas 68086-4 - Slash VXL 1/10 4x4 Short Course Truck RTR w/TSM, Vision Ed..
  • Features: Traxxas Stability Management TM (TSM). Powered by the Velineon Brushless Power System. Slash 4X4 reaches speeds in excess of 60+mph!*. Maxx Cable 12-gauge wire. Traxxas High-Current Connector (patented) allows high-capacity battery packs to deliver maximum voltage to the Velineon Brushless Power System. Exclusive waterproof electronics extend brushless power and performance to water, mud, and snow. Velineon VXL-3s Electronic Speed Control. LiPo and NiM.
  • Includes: (1) Slash 4X4 Short Course Race Truck w/TQi 2.4GHz Radio System (1) Brushless ESC and Motor (1) Body, Decals Illustrated Instruction Manual.
  • Specs: Length: 22.36" (568mm) Width: 11.65" (296mm) Height: 8.42" (214mm) Front and Rear Track: 11.65" (296mm) Distance Between Outer Edges of Wheels Side-to-Side Center Ground Clearance: 2.83" (72mm) Body Dimensions: Length: 21.25" (540mm) Width: 11.5" (292mm), Height: 5.5" (140mm) Spur Gear: 54 tooth, 0.8 Module 32 Pitch Pinion Gear: 13 Tooth.
  • Part number(s) included (in factory packaging): 68086-4.
Check Stock

Bumpers Compatible with Traxxas Slash 4x4 1/10 Platinum Front #6835 & Rear #6836 Bumpers Skid Plate with Mounts

  • #6835: Front Bumper & Mount, Black, Slash 4x4.
  • #6836: Rear Bumper & Mount, Black, Slash 4x4.
  • Great replacement for your worn or damaged bumpers..
  • Our parts are made from premium quality materials and designed for lasting performance..
  • This product is neither created or sold by Traxxas, nor sponsored or endorsed by Traxxas..
Check Stock

Traxxas 3776 2.8" Pre-Mounted Paddle Tires w/All-Star Rear Wheels (2)

  • Paddle tires feature a full-width rib for maximum bite and traction in mud, snow, and sand.
  • Tires are pre-glued and mounted with foam inserts and ready to run on your vehicle.
  • Mounted to satin-chrome beadlock style SCT wheels for use with Traxxas Slash.
  • Fits Traxxas Slash 4WD front and rear, or 2WD rear only (TSM rated).
Check Stock

E-Revo VXL Brushless 1/10 Scale 4WD Brushless Electric Monster Truck

  • Traxxas 86086-4 - E-Revo VXL Brushless 1/10 4x4 Monster Truck RTR, Blue.
  • Features: Chassis: Composite tub design, low CG for improved handling and vented internal battery compartments Drive: Shaft driven 4WD Motor: Four (4)....
  • Includes: (1) Traxxas 1/10 E-Revo 4WD Monster Truck (1) 2.4GHz radio system and Traxxas Stability Management (1) VXL-6s brushless power system (1)....
  • Specs: Length: 23.05” (585mm) Ground clearance: 2.90” (73mm) Weight: 11.2lb (5.08kg) Height: 8.7” (221mm) Wheelbase: 14.94 " (380mm) Final drive....
  • Part number(s) included (in factory packaging): 86086-4.
Check Stock

Traxxas 3743A Blue-Anodized T6 Aluminum Steering Bellcranks and Drag Link

  • Enhance your steering precision, strength, and looks with a genuine Traxxas machined aluminum steering bell crank assembly.
  • Made from laser-etched, high-strength, blue-anodized T6 aluminum.
  • Integrated sealed bearings for silky smooth operation, reduced friction, and long life.
  • Fits Traxxas Bandit, Rustler, and 2WD Slash.
  • Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles.
Check Stock

Traxxas 3639 Front Shock Tower

  • Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles.
  • This product is made from high quality materials and designed for lasting performance.
  • This is for use on RC vehicles such as the Traxxas Stampede, Rustler, Slash, Bandit.
  • consult your user's manual for exact parts listings.
Check Stock

Team Associated 1/10 Sand Paddle Rear Pre-Mounted Tires with Method Wheels Black 2 ASC71062

  • Paddle tires feature a full-width rib for maximum bite and traction in mud, snow, and sand.
  • Tires are pre-glued and mounted with foam inserts and ready to run on your vehicle.
  • Mounted to satin-chrome beadlock style SCT wheels for use with Traxxas Slash.
  • Fits Traxxas Slash 4WD front and rear, or 2WD rear only (TSM rated).
Check Stock

Traxxas 5835 Front Bumper, Slash, 464-Pack

  • Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles.
  • This product is made from high quality materials and designed for lasting performance.
  • This is for use on RC vehicles such as the Traxxas Slash.
  • consult your user's manual for exact parts listings.
Check Stock

Blue Metal Full Set RC Car Upgrade Parts for 1/10,Front & Rear Shock Tower Front & Rear Suspension Arm Steering Block Kit for 1/10 Traxxas Slash 2WD,Rustler,Stampede,Bandit

  • Metal Full Set RC Car Upgrade Parts Fits for Traxxas 1/10 Slash, Stampede, Rustler, Ford F150 SVT Raptor, Robby Gordon Dakar, Bandit, Monster Jam Series,Nitro Stampede,1/10 Nitro Slash 2WD,Bigfoot 2WD,Stampede VXL,Rustler VXL.
  • Precision CNC Machined Hop Up Part for Factory Spec Fitment. Easy and convenient to install and remove..
  • Made from Hardened Billet 6061 Aluminum for Lightweight and Durable Performance..
  • It is light yet strong with good polishing performance.High precision, good matching, perfectly fit your RC car..
  • Your Package List : 1 pcs Rear Shock Tower,1 pcs Front Shock Tower,1 pcs Caster Blocks(L),1 pcsCaster Blocks(R),4 pcs Suspension Screw Pins,1 Pair Front Arm,1 Pair Rear Arm,1 pcs Steering blocks(L),1 pcs Steering blocks(R),5 pcs bearings (4 x 5x11x4mm ),4 pcs PTFE washers,4 pcs Screw Pins,1 pcsTie Bar (PC),1 pcs short axis carrier (L),1 pcs short axis carrier (R),4 pcs washers,1 pcs cranks (L),1 pcs cranks (R),1 pcs drag line,4 pcs bearing,1 pcs mounting screw,2 pcs Screws..
Check Stock