ReviewsTraxxas Stampede Upgrade Parts

CODA RACING RC Alloy Caster Block&Steering Blocks&Rear Stub Axle Carriers for Traxxas 1/10 4X4 Slash Stampede Rustler 4WD -Replaces Part 6837 6832 1952

  • Easy upgrade replace Traxxas stock part #6832 Caster blocks(c-hubs)，#6837 Steering blocks,#1952 Stub axle carriers.
  • Fits: Traxxas 1/10 Slash 4X4 ,1/10 Stampede 4X4,1/10 Rustler 4X4,1/10 Slash 4X4 VXL Ultimate Platinum,1/10 Stampede 4X4 VXL,1/10 Rustler 4X4 VXL.ST....
  • Precision CNC machined,Anodized 6061-T6 aluminum for lightweight and durable performance..
  • Includes Caster blocks&Steering blocks(L/R),Stub axle carriers(L/R),5x11x4mm bearings(2),10x15x4mm bearings(6),Bushing Sleeves(4),Screws(6),PTFE....
Check Stock

Traxxas 1/10 Slash 2WD VXL MAGNUM 272 STEEL GEAR BLACK CASE TRANSMISSION

  • Complete planetary gear differential with steel ring gear and hardware.
  • Fits electric Bandit, Stampede, Rustler, and Slash 2WD.
  • This product is made from high quality materials and designed for lasting performance.
  • Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles.
Check Stock

Blue Metal Full Set RC Car Upgrade Parts for 1/10,Front & Rear Shock Tower Front & Rear Suspension Arm Steering Block Kit for 1/10 Traxxas Slash 2WD,Rustler,Stampede,Bandit

  • Metal Full Set RC Car Upgrade Parts Fits for Traxxas 1/10 Slash, Stampede, Rustler, Ford F150 SVT Raptor, Robby Gordon Dakar, Bandit, Monster Jam Series,Nitro Stampede,1/10 Nitro Slash 2WD,Bigfoot 2WD,Stampede VXL,Rustler VXL.
  • Precision CNC Machined Hop Up Part for Factory Spec Fitment. Easy and convenient to install and remove..
  • Made from Hardened Billet 6061 Aluminum for Lightweight and Durable Performance..
  • It is light yet strong with good polishing performance.High precision, good matching, perfectly fit your RC car..
  • Your Package List : 1 pcs Rear Shock Tower,1 pcs Front Shock Tower,1 pcs Caster Blocks(L),1 pcsCaster Blocks(R),4 pcs Suspension Screw Pins,1 Pair Front Arm,1 Pair Rear Arm,1 pcs Steering blocks(L),1 pcs Steering blocks(R),5 pcs bearings (4 x 5x11x4mm ),4 pcs PTFE washers,4 pcs Screw Pins,1 pcsTie Bar (PC),1 pcs short axis carrier (L),1 pcs short axis carrier (R),4 pcs washers,1 pcs cranks (L),1 pcs cranks (R),1 pcs drag line,4 pcs bearing,1 pcs mounting screw,2 pcs Screws..
Check Stock

Hobbypark Aluminum Rear Shock Tower for Traxxas 1/10 Slash 4x4 4wd Upgrade Replacement of 6838 Hop Up Parts Red

  • Compatible with:1/10 Traxxas Slash 4x4 Stampede 4x4,etc..
  • CNC machined for precision.Red-Anodized.Increased strength and precision.Easy upgrade from the original part.
  • Produced By HobbyPark ,Well made and durable,100% New.
  • 100% completely satisfied with our products, please do not hesitate to contact us to request a refund or exchange!.
Check Stock

Traxxas 3637 Front Axles (pair)

  • Driveshaft is fully assembled and ready to install with included screw pin.
  • Fits right rear or left rear Slash 4x4 and Stampede 4x4 models.
  • Direct OEM replacement for stock driveshaft.
  • This product is made from high quality materials and designed for long-lasting performance.
  • Use Traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles.
Check Stock

Globact Aluminum Alloy Front Caster Block&Steering Blocks and Rear Stub Axle Carriers kit with Ball Bearings Upgrade Parts for 1/10 Traxxas 2WD Slash, Stampede, Rustler, Replace 3632 3736 3752

  • RC 1/10 front caster steering blocks kit can be easily upgraded and replaced #3632 Caster blocks, #3736 Steering blocks, #3752 Stub axle carriers (rear)..
  • Front steering block knuckle kit is only compatible with 1/10 Traxxas 2WD Slash, Stampede, Stampede VXL, Slash VXL, Rustler, Rustler VXL, Ford F-150 Raptor RC vehicle ONLY..
  • Suitable for traxxas rustler 2wd steering blocks use aluminum alloy material, more wear-resistant, not easy to deform..
  • Multi-hole design, adjustable tie rod angle can be used for Traxxas Slash 2WD Caster Block.
  • Globact 2WD caster steering blocks Include(Necessary parts required for installation): 2*Rear Stub Axle Carriers, 2*Steering Block, 2*Caster Blocks (L/R), 6*Screw Pins, 2*Screw, 8*5x11x4mm bearings, 4*Gasket..
Check Stock

Front/Rear Aluminum Suspension Control A Arms Upgrade Parts 3655X for Traxxas 1/10 Slash 4x4 Stampede VXL 4WD RC Car Truck

  • Front/rear control a-arm set for Traxxas 1/10 Slash (VXL) 4x4, Stampede (VXL) 4WD, Rally and XO-1 RC car.
  • Upgrade of Parts #3655x, Easy to replace original A-Arms.
  • High quality aluminum, red anodized, superb craftsmanship.
  • CNC machined with precision, lightweight and durable.
  • Include suspension a-arms(4pcs), pins (4pcs) and E-clips (8pcs).
Check Stock

Hobbypark Aluminum Front Bulkhead Upgrade Parts for 1/10 Traxxas Slash 2WD Rustler Stampede Bandit Replace 2530 2530A, Navy Blue Anodized

  • ✔These are OEM Hop-Ups for 1/10 2WD Traxxas Slash(VXL) / Rustler(VXL) / Stampede(VXL) / Bandit(VXL) / Ford F-150 Raptor / Nitro Slash / Nitro Rustler RC Car, Consult your user's manual for exact parts listings..
  • ✔Come with Hardware(As shown),Easy upgrade from the original part.
  • ✔Made of Aluminum Alloy,Anodized,CNC machined,High precision.
  • ✔Package Include: 1 Piece (As shown in the pictures).
  • ✔100% New,Genuine HobbyPark RC Products,Exquisite workmanship & Durable.
Check Stock

Traxxas Slash 2WD Chassis Pre-Roller Gray Conversion Chassis 5822

  • This is a brand new Traxxas 2WD Slash chassis..
  • It includes everything seen in the pictures.
  • - chassis, skid plates, nerf bars, battery hold down, steering linkage, fiberglass tie bar, suspension arms, shock towers, camber links, screws, owners manual, parts list, and tools..
  • Turn your Stampede, Rustler, or Bandit into a Slash with this conversion chassis.
  • Pulled from a brand new Traxxas 2WD Slash..
Check Stock

Traxxas 3652A Blue-Anodized 6061-T6 Aluminum Rear Stub Axle Carriers (pair)

  • Left and right rear stub axle carriers are designed to fit electric Rustler, 2WD Stampede, 2WD Slash and Bandit.
  • Formed from strong and lightweight 6061-T6 aluminum (blue-anodized).
  • Larger 5x11mm ball bearings are included for smooth performance.
  • Rubber seals on the bearings make them virtually maintenance free.
  • Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles.
Check Stock

Traxxas 2797 Suspension Arm Mounts 0-Degree pair

  • Rc shock tower easily upgrades and replaces stock parts #3639 Front Shock Tower,#3638 Rear Shock Tower for Traxxas..
  • Compatible with Traxxas 1/10 Slash 2WD, Slash VXL, Stampede VXL, Bandit VXL, Bandit, Ford F-150 Raptor, Rustler VXL, Rustler etc 2WD car..
  • 2WD shock tower with multiple holes, you can adjust the angle, height, and height of the shock absorber to suit different ways of play..
  • 1/10 slash shock tower CNC precision machining, Made of aluminum alloy material, it has strong impact resistance and protects your car body from....
  • Rustler shock tower include: 1x Front, 1x Rear, 1× Screw pack.
Check Stock